Cessna Aircraft Company | Mitchell Industries, Inc. Airworthiness Directives

4 ADs indexed for Cessna Aircraft Company | Mitchell Industries, Inc. aircraft.

Models

Recent ADs

77-16-10

final rule

Airworthiness Directives; EDO-AIRE MITCHELL: Applies to Model NSD-360 Navigation Systems

Unsafe Condition: The use of VOR/LOC converters other than the Edo-Aire Mitchell 1C707 and 1C707-1 converters with the NSD-360 Navigation Systems may result in an unreliable primary VOR display for IFR navigation, c...

Effective: Sep 8, 1977 Category: appliance Compliance: within the next 50 hours in service after the effective date of this AD

Why matched: Airworthiness Directives; EDO-AIRE MITCHELL: Applies to Model NSD-360 Navigation Systems

73-13-11

final rule

Airworthiness Directives; MITCHELL INDUSTRIES, INC., doing business as EDO-AIRE MITCHELL: Applies to Mitchell Automatic Pilot Instruments

Unsafe Condition: Interference of the flap control system with the automatic pilot roll servo may result in loss of aileron control.

Effective: Jun 29, 1973 Category: appliance Compliance: within the next ten (10) hours' time in service after the effective date of this AD

Why matched: Airworthiness Directives; MITCHELL INDUSTRIES, INC., doing business as EDO-AIRE MITCHELL: Applies to Mitchell Automatic Pilot Instruments

Technical illustration of an aircraft flight control surface and actuator
Problem area Flight controls

72-02-06

final rule

Airworthiness Directives; MITCHELL INDUSTRIES, INC., doing business as EDO-AIRE MITCHELL: Applies to Mitchell Automatic Pilot Instruments

Unsafe Condition: Fatigue failure of the control wheel shaft with possible resultant loss of aileron and elevator control.

Effective: Jan 31, 1972 Category: appliance Compliance: within the next ten (10) hours' time in service after the effective date of this AD

Why matched: Airworthiness Directives; MITCHELL INDUSTRIES, INC., doing business as EDO-AIRE MITCHELL: Applies to Mitchell Automatic Pilot Instruments

70-15-18

final rule

Airworthiness Directives; MITCHELL INDUSTRIES, INC., doing business as EDO-AIRE MITCHELL: Applies to the Mitchell Century II, Century III (Serial Numbers 624 and below) and Stabilizer, Automatic Pilot and Automatic Aileron Stabilizer Instruments, and to Piper AutoControl III, Altimatic III and AutoFlite Automatic Pilot and Automatic Aileron Stabilizer Instruments

Unsafe Condition: Slippage of servo bridle cable clamps and resultant binding of the control system.

Effective: Aug 31, 1970 Category: appliance Compliance: within the next 25 hours' time in service after the effective date of this AD

Why matched: Airworthiness Directives; MITCHELL INDUSTRIES, INC., doing business as EDO-AIRE MITCHELL: Applies to the Mitchell Century II, Century III (Serial Numbers 624 and below) and Stabilizer, Automatic Pilot and Automatic Aileron Stabilizer Instruments, and to Piper AutoControl III, Altimatic III and AutoFlite Automatic Pilot and Automatic Aileron Stabilizer Instruments

View all Cessna Aircraft Company | Mitchell Industries, Inc. ADs →