AD 87-03-04

AD Final Rules - DRS_87-03-04.html
Copy URL
Print/Save as PDF
Document Versions
 Feedback
Details
AD Number:
87-03-04
Document Type:
AD Final Rules
Docket Number:
Unknown
Subject Heading:
Airworthiness Directives; CASA Model C-212 Series Airplanes
Subject:
Trim Control Markings & Placards
Status:
Current
Citation:
This information is not available.
Citation Publish Date:
Effective Date:
02/19/1987
Make:
EADS CASA
Model:
C-212-CB | C-212-CC | C-212-CD | C-212-CE | C-212-CF | C-212-DE | C-212-DF
Product Type:
Aircraft
Product Subtype:
Large Airplane
Affected AD:
Superseded AD:
Affected By:
Superseded By:
Service/Office:
Office of Primary Responsibility:
CFR Part Reference:
Part 39
Comments:
AIRWORTHINESS DIRECTIVES FINAL RULES: 87-03-04
CITATION:   This information is not available.

PAGE NUMBER:  

DOCKET NUMBER:   Unknown

AMENDMENT:   39-5515

AD NUMBER:   87-03-04

SUBJECT HEADING:   Airworthiness Directives; CASA Model C-212 Series Airplanes

ACTION:  

SUMMARY:  

DATES:   Effective February 19, 1987.

ADDRESSES:  

FOR FURTHER INFORMATION CONTACT:  

SUPPLEMENTARY INFORMATION:  

REGULATORY TEXT:   87-03-04 CASA: Amendment 39-5515. Applies to CASA Model C-212 series airplanes listed in CASA Service Bulletins 212-27-30 and 212-27-31, both dated October 23, 1985, certificated in any category. Compliance is required within 8 months after the effective date of this AD. To reduce the potential for a mis-trimmed takeoff, accomplish the following, unless previously accomplished:

A. Replace the trim control markings and placards in accordance with CASA Service Bulletins 212-27-30 (CC series airplanes) or 212-27-31 (CB series airplanes), both dated October 23, 1985, as applicable.

B. An alternate means of compliance or adjustment of the compliance time, which provides an acceptable level of safety, may be used when approved by the Manager, Standardization Branch, ANM-113, FAA, Northwest Mountain Region.

C. Special flight permits may be issued in accordance with FAR 21.197 and 21.199 to operate airplanes to a base for the accomplishment of the modifications required by this AD.

All persons affected by this directive who have not already received the appropriate service document from the manufacturer may obtain copies upon request to Construcciones Aeronauticas S.A., Getafe, Madrid Spain. This document may be examined at the FAA, Northwest Mountain Region, 17900 Pacific Highway South, Seattle, Washington, or the Seattle Aircraft Certification Office, 9010 East Marginal Way South, Seattle, Washington.

This amendment becomes effective February 19, 1987.

FOOTER: