AD 68-21-02

final rule

Airworthiness Directives; Aero Commander Model 100 and 100-180

AD Number
68-21-02
Status
final_rule
Effective Date
Product Category
aircraft
Docket
Unknown
FR Citation
This information is not available.
Technical illustration of an aircraft flight control surface and actuator
Problem area Flight controls

Applicability

TypeManufacturerModelDetails
aircraft Dynac Aerospace Corporation Aero Commander 100 Airworthiness Directives; Aero Commander Model 100 and 100-180
aircraft Dynac Aerospace Corporation Aero Commander 100-180 Airworthiness Directives; Aero Commander Model 100 and 100-180

Unsafe Condition

Aileron cable failure caused by improper swaging of P/N 35606 Aileron Cable Assembly

AI-generated summary from the source AD text. Verify against the official source before acting.

Required Actions

Inspect P/N 35606 Aileron Cable Assembly in accordance with Aero Commander Service Bulletin No. 1015 or FAA-approved method. Replace the assembly with a new properly swaged one if improper swaging or cable slippage is found.

AI-generated summary from the source AD text. Verify against the official source before acting.

Compliance Time

prior to further flight

AI-generated summary from the source AD text. Verify against the official source before acting.

Affected Aircraft

Dynac Aerospace Corporation Aero Commander Model 100 (Serial Nos. 1 through 278) and Model 100-180 (Serial Nos. 5001 through 5080)

AI-generated summary from the source AD text. Verify against the official source before acting.

Federal Register Abstract

Aileron Cable Assembly

Applicability Source Text

Show captured applicability text from the source AD
AD Final Rules - DRS_68-21-02.html
Copy URL
Print/Save as PDF
Document Versions
 Feedback
Details
AD Number:
68-21-02
Document Type:
AD Final Rules
Docket Number:
Unknown
Subject Heading:
Airworthiness Directives; Aero Commander Model 100 and 100-180
Subject:
Aileron Cable Assembly
Status:
Current
Citation:
This information is not available.
Citation Publish Date:
Effective Date:
10/15/1968
Make:
Dynac Aerospace Corporation
Model:
Aero Commander 100 | Aero Commander 100-180
Product Type:
Aircraft
Product Subtype:
Small Airplane
Affected AD:
Superseded AD:
Affected By:
Superseded By:
Service/Office:
Office of Primary Responsibility:
CFR Part Reference:
Part 39
Comments:
AIRWORTHINESS DIRECTIVES FINAL RULES: 68-21-02
CITATION:   This information is not available.

PAGE NUMBER:  

DOCKET NUMBER:   Unknown

AMENDMENT:   39-669

AD NUMBER:   68-21-02

SUBJECT HEADING:   Airworthiness Directives; Aero Commander Model 100 and 100-180

ACTION:  

SUMMARY:  

DATES:   Effective October 15, 1968.

ADDRESSES:  

FOR FURTHER INFORMATION CONTACT:  

SUPPLEMENTARY INFORMATION:  

REGULATORY TEXT:  
68-21-02 AERO COMMANDER: Amdt. 39-669. Applies to Aero Commander Model 100, Serial Nos. 1 through 278, and Aero Commander Model 100-180, Serial Nos. 5001 through 5080 airplanes.

Compliance required as indicated.

To prevent the possibility of aileron cable failure caused by improper swaging of P/N 35606 Aileron Cable Assembly, accomplish the following prior to further flight:

(a) Unless already accomplished, inspect P/N 35606 Aileron Cable Assembly in accordance with Aero Commander Service Bulletin No. 1015, dated October 4, 1968, or later FAA approved revisions or in a manner approved by the Chief, Engineering and Manufacturing Branch, Southern Region.

(b) If indications of improper swaging or of cable slippage are found, replace the assembly with a new P/N 35606 aileron cable assembly that is properly swaged in accordance with the criteria specified in Figure I of the service bulletin.

This amendment becomes effective October 15, 1968.

FOOTER:

Document Text

Show stored source text (verify against official source)
AD Final Rules - DRS_68-21-02.html
Copy URL
Print/Save as PDF
Document Versions
 Feedback
Details
AD Number:
68-21-02
Document Type:
AD Final Rules
Docket Number:
Unknown
Subject Heading:
Airworthiness Directives; Aero Commander Model 100 and 100-180
Subject:
Aileron Cable Assembly
Status:
Current
Citation:
This information is not available.
Citation Publish Date:
Effective Date:
10/15/1968
Make:
Dynac Aerospace Corporation
Model:
Aero Commander 100 | Aero Commander 100-180
Product Type:
Aircraft
Product Subtype:
Small Airplane
Affected AD:
Superseded AD:
Affected By:
Superseded By:
Service/Office:
Office of Primary Responsibility:
CFR Part Reference:
Part 39
Comments:
AIRWORTHINESS DIRECTIVES FINAL RULES: 68-21-02
CITATION:   This information is not available.

PAGE NUMBER:  

DOCKET NUMBER:   Unknown

AMENDMENT:   39-669

AD NUMBER:   68-21-02

SUBJECT HEADING:   Airworthiness Directives; Aero Commander Model 100 and 100-180

ACTION:  

SUMMARY:  

DATES:   Effective October 15, 1968.

ADDRESSES:  

FOR FURTHER INFORMATION CONTACT:  

SUPPLEMENTARY INFORMATION:  

REGULATORY TEXT:  
68-21-02 AERO COMMANDER: Amdt. 39-669. Applies to Aero Commander Model 100, Serial Nos. 1 through 278, and Aero Commander Model 100-180, Serial Nos. 5001 through 5080 airplanes.

Compliance required as indicated.

To prevent the possibility of aileron cable failure caused by improper swaging of P/N 35606 Aileron Cable Assembly, accomplish the following prior to further flight:

(a) Unless already accomplished, inspect P/N 35606 Aileron Cable Assembly in accordance with Aero Commander Service Bulletin No. 1015, dated October 4, 1968, or later FAA approved revisions or in a manner approved by the Chief, Engineering and Manufacturing Branch, Southern Region.

(b) If indications of improper swaging or of cable slippage are found, replace the assembly with a new P/N 35606 aileron cable assembly that is properly swaged in accordance with the criteria specified in Figure I of the service bulletin.

This amendment becomes effective October 15, 1968.

FOOTER:

Source: Official FAA Source ↗

Retrieved: Apr 8, 2026

Rights: U.S. Government Public Domain

This site is not affiliated with or endorsed by the FAA. Always verify with official sources.