AD 64-08-04
Applicability
| Type | Manufacturer | Model | Details |
|---|---|---|---|
| aircraft | American Navion Society, LTD. | D-16 | Airworthiness Directives; Universal Models Temco D-16 and D-16A Aircraft |
| aircraft | American Navion Society, LTD. | D-16A | Airworthiness Directives; Universal Models Temco D-16 and D-16A Aircraft |
Unsafe Condition
Cracking of nose gear support braces (Navion P/N 145-34161) and channel drag brace supports (Navion P/N 145-34204) on D-16 and D-16A aircraft.
AI-generated summary from the source AD text. Verify against the official source before acting.
Required Actions
Visually inspect Navion P/N 145-34161 for cracks and replace cracked parts with new ones. Add Temco P/N 5531A cap nose gear drag brace or equivalent, and replace Navion P/N 145-34204 with Universal P/N TN 5980A or equivalent on D-16 aircraft. Replace Navion P/N 145-34204 with Universal P/N TN 5980A or equivalent on D-16A aircraft.
AI-generated summary from the source AD text. Verify against the official source before acting.
Compliance Time
within 50 hours' time in service after the effective date of this AD
AI-generated summary from the source AD text. Verify against the official source before acting.
Affected Aircraft
Universal Models Temco D-16 and D-16A Aircraft, all serial numbers
AI-generated summary from the source AD text. Verify against the official source before acting.
Federal Register Abstract
Nose Landing Gear
Applicability Source Text
Show captured applicability text from the source AD
AD Final Rules - DRS_64-08-04.html Copy URL Print/Save as PDF Document Versions Feedback Details AD Number: 64-08-04 Document Type: AD Final Rules Docket Number: Unknown Subject Heading: Airworthiness Directives; Universal Models Temco D-16 and D-16A Aircraft Subject: Nose Landing Gear Status: Current Citation: This information is not available. Citation Publish Date: Effective Date: 05/11/1964 Make: American Navion Society, LTD. Model: D-16 | D-16A Product Type: Aircraft Product Subtype: Small Airplane Affected AD: Superseded AD: Affected By: Superseded By: Service/Office: Office of Primary Responsibility: CFR Part Reference: Part 39 Comments: AIRWORTHINESS DIRECTIVES FINAL RULES: 64-08-04 CITATION: This information is not available. PAGE NUMBER: DOCKET NUMBER: Unknown AMENDMENT: AD NUMBER: 64-08-04 SUBJECT HEADING: Airworthiness Directives; Universal Models Temco D-16 and D-16A Aircraft ACTION: SUMMARY: DATES: Effective May 11, 1964. ADDRESSES: FOR FURTHER INFORMATION CONTACT: SUPPLEMENTARY INFORMATION: REGULATORY TEXT: 64-08-04 UNIVERSAL: Amdt. 712 Part 507 Federal Register April 8, 1964. Applies to All Models Temco D-16 and D-16A Aircraft. Compliance required within 50 hours' time in service after the effective date of this AD. As a result of instances of cracking of nose gear support braces (Navion P/N 145-34161) and channel drag brace supports (Navion P/N 145-34204) installed on D-16 and D-16A aircraft accomplish the following: (a) On D-16 aircraft, visually inspect Navion P/N 145-34161 for cracks. If cracks are found, replace cracked part with a new part of the same number. In all cases, add Temco P/N 5531A cap nose gear drag brace or FAA approved equivalent, and replace Navion P/N 145-34204 with Universal P/N TN 5980A or FAA approved equivalent. Perform this rework in accordance with Temco Drawing TN 5505 or FAA approved equivalent. (b) On D-16A aircraft, replace Navion P/N 145-34204 with Universal P/N TN 5980A or FAA approved equivalent. (Universal Aircraft Service Bulletin No. 14 covers the same subject.) This directive effective May 11, 1964. FOOTER:
Document Text
Show stored source text (verify against official source)
AD Final Rules - DRS_64-08-04.html Copy URL Print/Save as PDF Document Versions Feedback Details AD Number: 64-08-04 Document Type: AD Final Rules Docket Number: Unknown Subject Heading: Airworthiness Directives; Universal Models Temco D-16 and D-16A Aircraft Subject: Nose Landing Gear Status: Current Citation: This information is not available. Citation Publish Date: Effective Date: 05/11/1964 Make: American Navion Society, LTD. Model: D-16 | D-16A Product Type: Aircraft Product Subtype: Small Airplane Affected AD: Superseded AD: Affected By: Superseded By: Service/Office: Office of Primary Responsibility: CFR Part Reference: Part 39 Comments: AIRWORTHINESS DIRECTIVES FINAL RULES: 64-08-04 CITATION: This information is not available. PAGE NUMBER: DOCKET NUMBER: Unknown AMENDMENT: AD NUMBER: 64-08-04 SUBJECT HEADING: Airworthiness Directives; Universal Models Temco D-16 and D-16A Aircraft ACTION: SUMMARY: DATES: Effective May 11, 1964. ADDRESSES: FOR FURTHER INFORMATION CONTACT: SUPPLEMENTARY INFORMATION: REGULATORY TEXT: 64-08-04 UNIVERSAL: Amdt. 712 Part 507 Federal Register April 8, 1964. Applies to All Models Temco D-16 and D-16A Aircraft. Compliance required within 50 hours' time in service after the effective date of this AD. As a result of instances of cracking of nose gear support braces (Navion P/N 145-34161) and channel drag brace supports (Navion P/N 145-34204) installed on D-16 and D-16A aircraft accomplish the following: (a) On D-16 aircraft, visually inspect Navion P/N 145-34161 for cracks. If cracks are found, replace cracked part with a new part of the same number. In all cases, add Temco P/N 5531A cap nose gear drag brace or FAA approved equivalent, and replace Navion P/N 145-34204 with Universal P/N TN 5980A or FAA approved equivalent. Perform this rework in accordance with Temco Drawing TN 5505 or FAA approved equivalent. (b) On D-16A aircraft, replace Navion P/N 145-34204 with Universal P/N TN 5980A or FAA approved equivalent. (Universal Aircraft Service Bulletin No. 14 covers the same subject.) This directive effective May 11, 1964. FOOTER:
Source: Official FAA Source ↗
Retrieved: Apr 8, 2026
Rights: U.S. Government Public Domain
This site is not affiliated with or endorsed by the FAA. Always verify with official sources.