AD 60-03-03

AD Final Rules - DRS_60-03-03.html
Copy URL
Print/Save as PDF
Document Versions
 Feedback
Details
AD Number:
60-03-03
Document Type:
AD Final Rules
Docket Number:
Unknown
Subject Heading:
Airworthiness Directives; Fairchild Models F-27, F-27A, and F-27B Airplanes
Subject:
Elevator Rivets
Status:
Current
Citation:
This information is not available.
Citation Publish Date:
Effective Date:
Make:
Maryland Air Industries, Inc.
Model:
F-27 | F-27A | F-27B
Product Type:
Aircraft
Product Subtype:
Large Airplane
Affected AD:
Superseded AD:
Affected By:
Superseded By:
Service/Office:
Office of Primary Responsibility:
CFR Part Reference:
Part 39
Comments:
AIRWORTHINESS DIRECTIVES FINAL RULES: 60-03-03
CITATION:   This information is not available.

PAGE NUMBER:  

DOCKET NUMBER:   Unknown

AMENDMENT:  

AD NUMBER:   60-03-03

SUBJECT HEADING:   Airworthiness Directives; Fairchild Models F-27, F-27A, and F-27B Airplanes

ACTION:  

SUMMARY:  

DATES:  

ADDRESSES:  

FOR FURTHER INFORMATION CONTACT:  

SUPPLEMENTARY INFORMATION:  

REGULATORY TEXT:  
60-03-03 FAIRCHILD: Amdt. 94 Part 507 Federal Register January 29, 1960. Applies to Models F-27, F-27A, and F-27B, Serial Numbers 1 to 64 inclusive.

Compliance required by February 15, 1960.

As a result of investigation of loose rivets in the rudder and elevator tension regulator assembly, P/N 0501101-0 or 0501101-1, the following must be accomplished:

Replace "cherry" rivets attaching the elevator bellcrank to tension regulator assembly with bolts, P/N 27-720003-9.

Assemblies already modified by replacing the "Cherry" rivets with AN 470DD rivets are acceptable. However, further use of AN 470DD rivets in this assembly is prohibited due to the difficulty of installing these rivets without seriously damaging the bellcrank. If AN 470DD rivets are replaced or removed, they shall be replaced with bolts, P/N 27-720003-9. (Fairchild Service Bulletin No. 27-16, revised September 8, 1959, covers this subject.)

FOOTER: