AD 47-47-13

final rule

Airworthiness Directives; Republic Model RC-3 Aircraft

AD Number
47-47-13
Status
final_rule
Effective Date
Product Category
aircraft
Docket
Unknown
FR Citation
This information is not available.
Technical illustration of an aircraft propeller assembly
Problem area Propeller

Applicability

TypeManufacturerModelDetails
aircraft Sky Enterprises, Inc. RC-3 Airworthiness Directives; Republic Model RC-3 Aircraft

Unsafe Condition

The Hartzell propeller hub counterweight length and position may not be correctly designated, leading to potential improper operation or failure of the reverse thrust system.

AI-generated summary from the source AD text. Verify against the official source before acting.

Required Actions

Determine the counterweight length and position to amend the hub designation as specified. Add suffix letters 'C' or 'A' based on counterweight dimensions. Affix 1/8-inch slugs to plain 4.50-inch counterweights. Revise reverse thrust operation placards with specific warnings based on engine serial numbers and propeller models.

AI-generated summary from the source AD text. Verify against the official source before acting.

Compliance Time

not later than next 100-hour inspection or January 15, 1948

AI-generated summary from the source AD text. Verify against the official source before acting.

Affected Aircraft

Republic Model RC-3 Aircraft with Hartzell propeller hub model HC-12X20-3

AI-generated summary from the source AD text. Verify against the official source before acting.

Federal Register Abstract

Hartzell Propeller Hub Counterweight

Applicability Source Text

Show captured applicability text from the source AD
AD Final Rules - DRS_47-47-13.html
Copy URL
Print/Save as PDF
Document Versions
 Feedback
Details
AD Number:
47-47-13
Document Type:
AD Final Rules
Docket Number:
Unknown
Subject Heading:
Airworthiness Directives; Republic Model RC-3 Aircraft
Subject:
Hartzell Propeller Hub Counterweight
Status:
Current
Citation:
This information is not available.
Citation Publish Date:
Effective Date:
Make:
Sky Enterprises, Inc.
Model:
RC-3
Product Type:
Aircraft
Product Subtype:
Small Airplane
Affected AD:
Superseded AD:
Affected By:
Superseded By:
Service/Office:
Office of Primary Responsibility:
CFR Part Reference:
Part 39
Comments:
AIRWORTHINESS DIRECTIVES FINAL RULES: 47-47-13
CITATION:   This information is not available.

PAGE NUMBER:  

DOCKET NUMBER:   Unknown

AMENDMENT:  

AD NUMBER:   47-47-13

SUBJECT HEADING:   Airworthiness Directives; Republic Model RC-3 Aircraft

ACTION:  

SUMMARY:  

DATES:  

ADDRESSES:  

FOR FURTHER INFORMATION CONTACT:  

SUPPLEMENTARY INFORMATION:  

REGULATORY TEXT:   47-47-13 REPUBLIC: (Was Mandatory Note 11 of AD-769-2.) Applies to Model RC-3 Aircraft.

To be accomplished not later than next 100-hour inspection or January 15, 1948.

If the Hartzell propeller hub model on your airplane is HC-12X20-3, determine the counter weight length and position on the hub in order that the hub designation can be amended as necessary in accordance with the following:

(a) Plain counterweights 4.650 inches in length - the designation HC-12X20-3 is unchanged.

(b) Notched counterweight 4.50 inches in length - add suffix letter "C" to designation so that it reads HC-12X20-3C.

(c) Plain counterweight 4.50 inches in length - a 1/8-inch slug must be added to these counterweights and suffix letter "A" added to the hub designation so that it reads HC- 12X20-3A. Any of these hubs on which the slugs have not been added to the counterweights must be removed from service until the counterweight slugs are affixed.

Revise the reverse thrust operation placard as follows:

For airplanes with 6A8-215-B8F engines, Serial Numbers 23001 to 23280, inclusive, and HC12X20-2 propeller:

WARNING - Reversing propeller in flight prohibited. Operate reverse lever in low pitch only. Maximum 1,750 r.p.m. in reverse pitch.

For airplanes with 6A8-215-B8F engines, Serial Numbers 23001 F to 23280 F, inclusive, and 23281 and up and all -B9F engines and

(1) HC-12X20-3 or 3-A propellers:

WARNING - Reversing propeller in flight prohibited. Operate reverse lever in low pitch only. Maximum 2,300 r.p.m. in reverse pitch. Or

(2) HC-12X20-2 or -3C propellers:

WARNING - Reversing propeller in flight prohibited. Operate reverse lever in low pitch only.

FOOTER:

Document Text

Show stored source text (verify against official source)
AD Final Rules - DRS_47-47-13.html
Copy URL
Print/Save as PDF
Document Versions
 Feedback
Details
AD Number:
47-47-13
Document Type:
AD Final Rules
Docket Number:
Unknown
Subject Heading:
Airworthiness Directives; Republic Model RC-3 Aircraft
Subject:
Hartzell Propeller Hub Counterweight
Status:
Current
Citation:
This information is not available.
Citation Publish Date:
Effective Date:
Make:
Sky Enterprises, Inc.
Model:
RC-3
Product Type:
Aircraft
Product Subtype:
Small Airplane
Affected AD:
Superseded AD:
Affected By:
Superseded By:
Service/Office:
Office of Primary Responsibility:
CFR Part Reference:
Part 39
Comments:
AIRWORTHINESS DIRECTIVES FINAL RULES: 47-47-13
CITATION:   This information is not available.

PAGE NUMBER:  

DOCKET NUMBER:   Unknown

AMENDMENT:  

AD NUMBER:   47-47-13

SUBJECT HEADING:   Airworthiness Directives; Republic Model RC-3 Aircraft

ACTION:  

SUMMARY:  

DATES:  

ADDRESSES:  

FOR FURTHER INFORMATION CONTACT:  

SUPPLEMENTARY INFORMATION:  

REGULATORY TEXT:   47-47-13 REPUBLIC: (Was Mandatory Note 11 of AD-769-2.) Applies to Model RC-3 Aircraft.

To be accomplished not later than next 100-hour inspection or January 15, 1948.

If the Hartzell propeller hub model on your airplane is HC-12X20-3, determine the counter weight length and position on the hub in order that the hub designation can be amended as necessary in accordance with the following:

(a) Plain counterweights 4.650 inches in length - the designation HC-12X20-3 is unchanged.

(b) Notched counterweight 4.50 inches in length - add suffix letter "C" to designation so that it reads HC-12X20-3C.

(c) Plain counterweight 4.50 inches in length - a 1/8-inch slug must be added to these counterweights and suffix letter "A" added to the hub designation so that it reads HC- 12X20-3A. Any of these hubs on which the slugs have not been added to the counterweights must be removed from service until the counterweight slugs are affixed.

Revise the reverse thrust operation placard as follows:

For airplanes with 6A8-215-B8F engines, Serial Numbers 23001 to 23280, inclusive, and HC12X20-2 propeller:

WARNING - Reversing propeller in flight prohibited. Operate reverse lever in low pitch only. Maximum 1,750 r.p.m. in reverse pitch.

For airplanes with 6A8-215-B8F engines, Serial Numbers 23001 F to 23280 F, inclusive, and 23281 and up and all -B9F engines and

(1) HC-12X20-3 or 3-A propellers:

WARNING - Reversing propeller in flight prohibited. Operate reverse lever in low pitch only. Maximum 2,300 r.p.m. in reverse pitch. Or

(2) HC-12X20-2 or -3C propellers:

WARNING - Reversing propeller in flight prohibited. Operate reverse lever in low pitch only.

FOOTER:

Source: Official FAA Source ↗

Retrieved: Apr 8, 2026

Rights: U.S. Government Public Domain

This site is not affiliated with or endorsed by the FAA. Always verify with official sources.