AD 47-14-01

final rule

Airworthiness Directives; Bellanca Model 14- 13, 14-13-2 Airplanes

AD Number
47-14-01
Status
final_rule
Effective Date
Product Category
aircraft
Docket
Unknown
FR Citation
This information is not available.

Applicability

TypeManufacturerModelDetails
aircraft Bellanca Aircraft Corporation 14-13 Airworthiness Directives; Bellanca Model 14- 13, 14-13-2 Airplanes
aircraft Bellanca Aircraft Corporation 14-13-2 Airworthiness Directives; Bellanca Model 14- 13, 14-13-2 Airplanes

Unsafe Condition

The aluminum alloy inboard flap hinge brackets may fail due to insufficient strength.

AI-generated summary from the source AD text. Verify against the official source before acting.

Required Actions

Replace the aluminum alloy inboard flap hinge brackets with X4130 steel brackets, Bellanca P/N 7998-1.

AI-generated summary from the source AD text. Verify against the official source before acting.

Compliance Time

prior to June 1, 1947

AI-generated summary from the source AD text. Verify against the official source before acting.

Affected Aircraft

Bellanca Model 14-13, 14-13-2 serial numbers 1060 to 1409, inclusive.

AI-generated summary from the source AD text. Verify against the official source before acting.

Federal Register Abstract

Flap Hinge Bracket

Applicability Source Text

Show captured applicability text from the source AD
AD Final Rules - DRS_47-14-01.html
Copy URL
Print/Save as PDF
Document Versions
 Feedback
Details
AD Number:
47-14-01
Document Type:
AD Final Rules
Docket Number:
Unknown
Subject Heading:
Airworthiness Directives; Bellanca Model 14- 13, 14-13-2 Airplanes
Subject:
Flap Hinge Bracket
Status:
Current
Citation:
This information is not available.
Citation Publish Date:
Effective Date:
Make:
Bellanca Aircraft Corporation
Model:
14-13 | 14-13-2
Product Type:
Aircraft
Product Subtype:
Small Airplane
Affected AD:
Superseded AD:
Affected By:
Superseded By:
Service/Office:
Office of Primary Responsibility:
CFR Part Reference:
Part 39
Comments:
AIRWORTHINESS DIRECTIVES FINAL RULES: 47-14-01
CITATION:   This information is not available.

PAGE NUMBER:  

DOCKET NUMBER:   Unknown

AMENDMENT:  

AD NUMBER:   47-14-01

SUBJECT HEADING:   Airworthiness Directives; Bellanca Model 14- 13, 14-13-2 Airplanes

ACTION:  

SUMMARY:  

DATES:  

ADDRESSES:  

FOR FURTHER INFORMATION CONTACT:  

SUPPLEMENTARY INFORMATION:  

REGULATORY TEXT:  
47-14-01 BELLANCA: (Was Mandatory Note 5 of AD-773-5.) Applies to Models 14- 13, 14-13-2 Serial Numbers 1060 to 1409, Inclusive.

Compliance required prior to June 1, 1947.

Replace the aluminum alloy inboard flap hinge brackets with X4130 steel brackets, Bellanca P/N 7998-1.

Bellanca Service Bulletin No. 7 dated January 14, 1947, covers this same subject.)

FOOTER:

Document Text

Show stored source text (verify against official source)
AD Final Rules - DRS_47-14-01.html
Copy URL
Print/Save as PDF
Document Versions
 Feedback
Details
AD Number:
47-14-01
Document Type:
AD Final Rules
Docket Number:
Unknown
Subject Heading:
Airworthiness Directives; Bellanca Model 14- 13, 14-13-2 Airplanes
Subject:
Flap Hinge Bracket
Status:
Current
Citation:
This information is not available.
Citation Publish Date:
Effective Date:
Make:
Bellanca Aircraft Corporation
Model:
14-13 | 14-13-2
Product Type:
Aircraft
Product Subtype:
Small Airplane
Affected AD:
Superseded AD:
Affected By:
Superseded By:
Service/Office:
Office of Primary Responsibility:
CFR Part Reference:
Part 39
Comments:
AIRWORTHINESS DIRECTIVES FINAL RULES: 47-14-01
CITATION:   This information is not available.

PAGE NUMBER:  

DOCKET NUMBER:   Unknown

AMENDMENT:  

AD NUMBER:   47-14-01

SUBJECT HEADING:   Airworthiness Directives; Bellanca Model 14- 13, 14-13-2 Airplanes

ACTION:  

SUMMARY:  

DATES:  

ADDRESSES:  

FOR FURTHER INFORMATION CONTACT:  

SUPPLEMENTARY INFORMATION:  

REGULATORY TEXT:  
47-14-01 BELLANCA: (Was Mandatory Note 5 of AD-773-5.) Applies to Models 14- 13, 14-13-2 Serial Numbers 1060 to 1409, Inclusive.

Compliance required prior to June 1, 1947.

Replace the aluminum alloy inboard flap hinge brackets with X4130 steel brackets, Bellanca P/N 7998-1.

Bellanca Service Bulletin No. 7 dated January 14, 1947, covers this same subject.)

FOOTER:

Source: Official FAA Source ↗

Retrieved: Apr 8, 2026

Rights: U.S. Government Public Domain

This site is not affiliated with or endorsed by the FAA. Always verify with official sources.