AD 2019-03-02
Applicability
| Type | Manufacturer | Model | Details |
|---|---|---|---|
| aircraft | Bell | Various | Airworthiness Directives; Pacific Aerospace Limited Airplanes |
| aircraft | Aviat | Various | Airworthiness Directives; Pacific Aerospace Limited Airplanes |
Unsafe Condition
It is possible that the elevator bellcrank pivot joint could be assembled with a bolt P/N AN4-20 that is a little too short, leaving threads inside the working area of the section of the joint.
AI-generated summary from the source AD text. Verify against the official source before acting.
Required Actions
Inspect the elevator bellcrank pivot joint to determine the length and the part number (P/N) of the bolt installed. If bolt, P/N AN4-20, is installed, inspect the cross tube to confirm structural integrity, take necessary corrective actions, and replace the incorrect size bolt with a correct sized bolt.
AI-generated summary from the source AD text. Verify against the official source before acting.
Compliance Time
Within the next 150 hours time-in-service after March 28, 2019, or within the next 12 months after March 28, 2019, whichever occurs later.
AI-generated summary from the source AD text. Verify against the official source before acting.
Affected Aircraft
Pacific Aerospace Limited Model 750XL airplanes, all serial numbers through 215, certificated in any category.
AI-generated summary from the source AD text. Verify against the official source before acting.
Source: Official FAA Source ↗
Retrieved: Apr 4, 2026
Rights: U.S. Government Public Domain
This site is not affiliated with or endorsed by the FAA. Always verify with official sources.