AD 2011-06-01
Applicability
| Type | Manufacturer | Model | Details |
|---|---|---|---|
| aircraft | Aviat | Various | Airworthiness Directives; APEX Aircraft Model CAP 10 B Airplanes |
Unsafe Condition
Improper locking of a turnbuckle (locking clip missing) of the flight control cables, leading to the inadvertent release of the pitchup control cable from the turnbuckle.
AI-generated summary from the source AD text. Verify against the official source before acting.
Required Actions
Inspect turnbuckles to verify proper installation of locking clips and safety wire, or verify correct installation of safety locking devices for other designs. Restore correct turnbuckle installation if discrepancies are found. Repeat inspections at intervals not exceeding 110 hours time-in-service or 13 months, whichever occurs first.
AI-generated summary from the source AD text. Verify against the official source before acting.
Compliance Time
Within 2 months after April 13, 2011
AI-generated summary from the source AD text. Verify against the official source before acting.
Affected Aircraft
APEX Aircraft Model CAP10 B and CAP10 B airplanes with Major Change 000302 (commercial name CAP10C), all serial numbers, certificated in any category.
AI-generated summary from the source AD text. Verify against the official source before acting.
Source: Official FAA Source ↗
Retrieved: Apr 6, 2026
Rights: U.S. Government Public Domain
This site is not affiliated with or endorsed by the FAA. Always verify with official sources.