AD 2009-02-01
Applicability
| Type | Manufacturer | Model | Details |
|---|---|---|---|
| aircraft | Construcciones | Aeronauticas, S.A. (CASA), Model C-212-DF | Airworthiness Directives; Construcciones Aeronauticas, S.A. (CASA), Model C-212-DF Airplanes |
Unsafe Condition
Cracks in outer to center wing attachment fittings caused by a defective manufacturing process, which could result in reduced structural integrity of the airplane.
AI-generated summary from the source AD text. Verify against the official source before acting.
Required Actions
Conduct a one-time conductivity inspection to determine the material used in manufacturing outer to center wing attachment fittings. Perform one-time inspections to detect cracks on affected fittings using high and low frequency eddy current methods. Replace cracked fittings using a method approved by the FAA or EASA if necessary.
AI-generated summary from the source AD text. Verify against the official source before acting.
Compliance Time
Within 10 flight hours
AI-generated summary from the source AD text. Verify against the official source before acting.
Affected Aircraft
Construcciones Aeronauticas, S.A. (CASA), Model C-212-DF airplanes.
AI-generated summary from the source AD text. Verify against the official source before acting.
Source: Official FAA Source ↗
Retrieved: Apr 4, 2026
Rights: U.S. Government Public Domain
This site is not affiliated with or endorsed by the FAA. Always verify with official sources.