AD 2000-02-06
Applicability
| Type | Manufacturer | Model | Details |
|---|---|---|---|
| aircraft | Bombardier Inc. | DHC-8-101 | Airworthiness Directives; Bombardier Model DHC-8-100, -200, and -300 Series Airplanes |
| aircraft | Bombardier Inc. | DHC-8-102 | Airworthiness Directives; Bombardier Model DHC-8-100, -200, and -300 Series Airplanes |
| aircraft | Bombardier Inc. | DHC-8-103 | Airworthiness Directives; Bombardier Model DHC-8-100, -200, and -300 Series Airplanes |
| aircraft | Bombardier Inc. | DHC-8-106 | Airworthiness Directives; Bombardier Model DHC-8-100, -200, and -300 Series Airplanes |
| aircraft | Bombardier Inc. | DHC-8-201 | Airworthiness Directives; Bombardier Model DHC-8-100, -200, and -300 Series Airplanes |
| aircraft | Bombardier Inc. | DHC-8-202 | Airworthiness Directives; Bombardier Model DHC-8-100, -200, and -300 Series Airplanes |
| aircraft | Bombardier Inc. | DHC-8-301 | Airworthiness Directives; Bombardier Model DHC-8-100, -200, and -300 Series Airplanes |
| aircraft | Bombardier Inc. | DHC-8-311 | Airworthiness Directives; Bombardier Model DHC-8-100, -200, and -300 Series Airplanes |
| aircraft | Bombardier Inc. | DHC-8-315 | Airworthiness Directives; Bombardier Model DHC-8-100, -200, and -300 Series Airplanes |
Unsafe Condition
Loss of the automatic overspeed protection of the propeller control system, which could result in a propeller overspeed condition and possible damage to the engine and propeller.
AI-generated summary from the source AD text. Verify against the official source before acting.
Required Actions
Conduct a one-time visual inspection to determine the part numbers of the beta back-up test switches of the propeller control system. Replace the switches, if necessary.
AI-generated summary from the source AD text. Verify against the official source before acting.
Compliance Time
Before further flight.
AI-generated summary from the source AD text. Verify against the official source before acting.
Affected Aircraft
Bombardier Model DHC-8-100, -200, and -300 series airplanes.
AI-generated summary from the source AD text. Verify against the official source before acting.
Federal Register Abstract
This amendment adopts a new airworthiness directive (AD) that is applicable to certain Bombardier Model DHC-8-100, -200, and -300 series airplanes. This action requires a one-time visual inspection to determine the part numbers of the beta back-up test switches of the propeller control system, and replacement of the switches, if necessary. This amendment is prompted by issuance of mandatory continuing airworthiness information by a foreign civil airworthiness authority. The actions specified in this AD are intended to prevent loss of the automatic overspeed protection of the propeller control system, which could result in a propeller overspeed condition and possible damage to the engine and propeller.
Document Text
Show stored source text (verify against official source)
[Federal Register Volume 65, Number 21 (Tuesday, February 1, 2000)]
[Rules and Regulations]
[Pages 4755-4757]
From the Federal Register Online via the Government Publishing Office [<a href="http://www.gpo.gov">www.gpo.gov</a>]
[FR Doc No: 00-1956]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. 2000-NM-08-AD; Amendment 39-11525; AD 2000-02-06]
RIN 2120-AA64
Airworthiness Directives; Bombardier Model DHC-8-100, -200, and -
300 Series Airplanes
AGENCY: Federal Aviation Administration, DOT.
ACTION: Final rule; request for comments.
-----------------------------------------------------------------------
SUMMARY: This amendment adopts a new airworthiness directive (AD) that
is applicable to certain Bombardier Model DHC-8-100, -200, and -300
series airplanes. This action requires a one-time visual inspection to
determine the part numbers of the beta back-up test
[[Page 4756]]
switches of the propeller control system, and replacement of the
switches, if necessary. This amendment is prompted by issuance of
mandatory continuing airworthiness information by a foreign civil
airworthiness authority. The actions specified in this AD are intended
to prevent loss of the automatic overspeed protection of the propeller
control system, which could result in a propeller overspeed condition
and possible damage to the engine and propeller.
DATES: Effective February 16, 2000.
The incorporation by reference of certain publications listed in
the regulations is approved by the Director of the Federal Register as
of February 16, 2000.
Comments for inclusion in the Rules Docket must be received on or
before March 2, 2000.
ADDRESSES: Submit comments in triplicate to the Federal Aviation
Administration (FAA), Transport Airplane Directorate, ANM-114,
Attention: Rules Docket No. 2000-NM-08-AD, 1601 Lind Avenue, SW.,
Renton, Washington 98055-4056.
The service information referenced in this AD may be obtained from
Bombardier, Inc., Bombardier Regional Aircraft Division, 123 Garratt
Boulevard, Downsview, Ontario M3K 1Y5, Canada. This information may be
examined at the FAA, Transport Airplane Directorate, 1601 Lind Avenue,
SW., Renton, Washington; or at the FAA, Engine and Propeller
Directorate, New York Aircraft Certification Office, 10 Fifth Street,
Third Floor, Valley Stream, New York; or at the Office of the Federal
Register, 800 North Capitol Street, NW., suite 700, Washington, DC.
FOR FURTHER INFORMATION CONTACT: James E. Delisio, Aerospace Engineer,
Airframe and Propulsion Branch, ANE-171, FAA, Engine and Propeller
Directorate, New York Aircraft Certification Office, 10 Fifth Street,
Third Floor, Valley Stream, New York 11581; telephone (516) 256-7521;
fax (516) 568-2716.
SUPPLEMENTARY INFORMATION: Transport Canada Civil Aviation (TCCA),
which is the airworthiness authority for Canada, notified the FAA that
an unsafe condition may exist on certain Bombardier Model DHC-8-100, -
200, and -300 series airplanes. TCCA advises that a certain beta back-
up test switch is incorrectly identified as an allowable replacement in
the wiring diagram manuals. This incorrect switch is used elsewhere on
the aircraft and is physically interchangeable with the correct switch.
However, the internal contacts of the incorrect switch are different.
This difference prevents the beta back-up system of the propeller
control system from functioning correctly if a mechanical failure of
the propeller control system occurs. In the event of such an
occurrence, the automatic overspeed protection could be lost. This
condition, if not corrected, could result in a propeller overspeed
condition and possible damage to the engine and propeller.
Explanation of Relevant Service Information
The manufacturer has issued de Havilland Alert Service Bulletin
S.B. A8-61-30, Revision `B,' dated December 6, 1999, which describes
procedures for a one-time visual inspection to determine the part
numbers of the beta back-up test switches of the propeller control
system, and replacement of the switches with new switches, if
necessary. Accomplishment of the actions specified in the alert service
bulletin is intended to adequately address the identified unsafe
condition. TCCA classified this alert service bulletin as mandatory and
issued Canadian airworthiness directive CF-99-30, dated December 9,
1999, in order to assure the continued airworthiness of these airplanes
in Canada.
FAA's Conclusions
This airplane model is manufactured in Canada and is type
certificated for operation in the United States under the provisions of
section 21.29 of the Federal Aviation Regulations (14 CFR 21.29) and
the applicable bilateral airworthiness agreement. Pursuant to this
bilateral airworthiness agreement, TCCA has kept the FAA informed of
the situation described above. The FAA has examined the findings of
TCCA, reviewed all available information, and determined that AD action
is necessary for products of this type design that are certificated for
operation in the United States.
Explanation of Requirements of Rule
Since an unsafe condition has been identified that is likely to
exist or develop on other airplanes of the same type design registered
in the United States, this AD is being issued to prevent loss of the
automatic overspeed protection of the propeller control system, which
could result in a propeller overspeed condition and possible damage to
the engine and propeller. This AD requires accomplishment of the
actions specified in the alert service bulletin described previously.
Determination of Rule's Effective Date
Since a situation exists that requires the immediate adoption of
this regulation, it is found that notice and opportunity for prior
public comment hereon are impracticable, and that good cause exists for
making this amendment effective in less than 30 days.
Comments Invited
Although this action is in the form of a final rule that involves
requirements affecting flight safety and, thus, was not preceded by
notice and an opportunity for public comment, comments are invited on
this rule. Interested persons are invited to comment on this rule by
submitting such written data, views, or arguments as they may desire.
Communications shall identify the Rules Docket number and be submitted
in triplicate to the address specified under the caption ADDRESSES. All
communications received on or before the closing date for comments will
be considered, and this rule may be amended in light of the comments
received. Factual information that supports the commenter's ideas and
suggestions is extremely helpful in evaluating the effectiveness of the
AD action and determining whether additional rulemaking action would be
needed.
Comments are specifically invited on the overall regulatory,
economic, environmental, and energy aspects of the rule that might
suggest a need to modify the rule. All comments submitted will be
available, both before and after the closing date for comments, in the
Rules Docket for examination by interested persons. A report that
summarizes each FAA-public contact concerned with the substance of this
AD will be filed in the Rules Docket.
Commenters wishing the FAA to acknowledge receipt of their comments
submitted in response to this rule must submit a self-addressed,
stamped postcard on which the following statement is made: ``Comments
to Docket Number 2000-NM-08-AD.'' The postcard will be date stamped and
returned to the commenter.
Regulatory Impact
The regulations adopted herein will not have a substantial direct
effect on the States, on the relationship between the national
Government and the States, or on the distribution of power and
responsibilities among the various levels of government. Therefore, it
is determined that this final rule does not have federalism
implications under Executive Order 13132.
The FAA has determined that this regulation is an emergency
regulation
[[Page 4757]]
that must be issued immediately to correct an unsafe condition in
aircraft, and that it is not a ``significant regulatory action'' under
Executive Order 12866. It has been determined further that this action
involves an emergency regulation under DOT Regulatory Policies and
Procedures (44 FR 11034, February 26, 1979). If it is determined that
this emergency regulation otherwise would be significant under DOT
Regulatory Policies and Procedures, a final regulatory evaluation will
be prepared and placed in the Rules Docket. A copy of it, if filed, may
be obtained from the Rules Docket at the location provided under the
caption ``ADDRESSES.''
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by
reference, Safety.
Adoption of the Amendment
Accordingly, pursuant to the authority delegated to me by the
Administrator, the Federal Aviation Administration amends part 39 of
the Federal Aviation Regulations (14 CFR part 39) as follows:
PART 39--AIRWORTHINESS DIRECTIVES
1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
Sec. 39.13 [Amended]
2. Section 39.13 is amended by adding the following new
airworthiness directive:
2000-02-06 Bombardier, Inc.
(Formerly de Havilland, Inc.): Amendment 39-11525. Docket 2000-
NM-08-AD.
Applicability: Model DHC-8-100, -200, and -300 series airplanes;
serial numbers 003 through 538 inclusive; certificated in any
category.
Note 1: This AD applies to each airplane identified in the
preceding applicability provision, regardless of whether it has been
modified, altered, or repaired in the area subject to the
requirements of this AD. For airplanes that have been modified,
altered, or repaired so that the performance of the requirements of
this AD is affected, the owner/operator must request approval for an
alternative method of compliance in accordance with paragraph (b) of
this AD. The request should include an assessment of the effect of
the modification, alteration, or repair on the unsafe condition
addressed by this AD; and, if the unsafe condition has not been
eliminated, the request should include specific proposed actions to
address it.
Compliance: Required as indicated, unless accomplished
previously.
To prevent loss of the automatic overspeed protection of the
propeller control system, which could result in a propeller
overspeed condition and possible damage to the engine and propeller,
accomplish the following:
(a) Within 50 flight hours after the effective date of this AD,
perform a one-time visual inspection to determine the part numbers
of the beta back-up test switches of the propeller control system,
in accordance with de Havilland Alert Service Bulletin S.B. A8-61-
30, Revision `B,' dated December 6, 1999.
(1) If all switches have the correct part number (as specified
by the alert service bulletin), no further action is required by
this AD.
(2) If any switch does not have the correct part number (as
specified by the alert service bulletin), prior to further flight,
remove and replace the switch with a new switch having part number
MS27407-6, in accordance with the alert service bulletin.
Alternative Methods of Compliance
(b) An alternative method of compliance or adjustment of the
compliance time that provides an acceptable level of safety may be
used if approved by the Manager, New York Aircraft Certification
Office (ACO), FAA, Engine and Propeller Directorate. Operators shall
submit their requests through an appropriate FAA Principal
Maintenance Inspector, who may add comments and then send it to the
Manager, New York ACO.
Note 2: Information concerning the existence of approved
alternative methods of compliance with this AD, if any, may be
obtained from the New York ACO.
Special Flight Permits
(c) Special flight permits may be issued in accordance with
sections 21.197 and 21.199 of the Federal Aviation Regulations (14
CFR 21.197 and 21.199) to operate the airplane to a location where
the requirements of this AD can be accomplished.
Incorporation by Reference
(d) The actions shall be done in accordance with de Havilland
Alert Service
Bulletin S.B. A8-61-30, Revision `B,' dated December 6, 1999.
This incorporation by reference was approved by the Director of the
Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part
51. Copies may be obtained from Bombardier, Inc., Bombardier
Regional Aircraft Division, 123 Garratt Boulevard, Downsview,
Ontario M3K 1Y5, Canada. Copies may be inspected at the FAA,
Transport Airplane Directorate, 1601 Lind Avenue, SW., Renton,
Washington; or at the FAA, Engine and Propeller Directorate, New
York Aircraft Certification Office, 10 Fifth Street, Third Floor,
Valley Stream, New York; or at the Office of the Federal Register,
800 North Capitol Street, NW., suite 700, Washington, DC.
Note 3: The subject of this AD is addressed in Canadian
airworthiness directive CF-99-30, dated December 9, 1999.
(e) This amendment becomes effective on February 16, 2000.
Issued in Renton, Washington, on January 21, 2000.
Donald L. Riggin,
Acting Manager, Transport Airplane Directorate, Aircraft Certification
Service.
[FR Doc. 00-1956 Filed 1-31-00; 8:45 am]
BILLING CODE 4910-13-U
Source: Official FAA Source ↗
Retrieved: Apr 6, 2026
Rights: U.S. Government Public Domain
This site is not affiliated with or endorsed by the FAA. Always verify with official sources.