Search FAA Documents

7 results found (1338ms)

Sort by: Date AD Number

2023-17-04

final rule

Airworthiness Directives; Continental Aerospace Technologies, Inc. Engines

Unsafe Condition: power loss due to oil starvation

Effective: Oct 26, 2023 Category: aircraft Compliance: Before accumulating 50 flight hours after the effective date of this AD or at the next scheduled ...

Why matched: Airworthiness Directives; Continental Aerospace Technologies, Inc. Engines

2023-05-16

final rule

Airworthiness Directives; Continental Aerospace Technologies, Inc., Reciprocating Engines

Unsafe Condition: unsafe condition.

Effective: Mar 15, 2023 Category: engine

Why matched: Airworthiness Directives; Continental Aerospace Technologies, Inc., Reciprocating Engines

2023-04-08

final rule

Airworthiness Directives; Continental Aerospace Technologies, Inc. Reciprocating Engines

Unsafe Condition: improper installation and inspection of counterweight retaining rings in the engine crankshaft counterweight groove during manufacture, which may result in loss of retention of the counterweight, l...

Effective: Feb 23, 2023 Category: engine Compliance: Before further flight

Why matched: Airworthiness Directives; Continental Aerospace Technologies, Inc. Reciprocating Engines

Technical illustration of an aircraft turbine engine assembly
Problem area Engine

2023-02-12

final rule

Airworthiness Directives; Continental Aerospace Technologies, Inc. Reciprocating Engines With a Certain Superior Air Parts, Inc. Intake Valve Installed

Unsafe Condition: The intake valve material on SAP part number (P/N) SA539988, with lot number 19077 O, was out of specification and did not meet the minimum requirement for elongation, a condition that may cause ru...

Effective: Feb 17, 2023 Category: engine Compliance: Within 30 days from the effective date of this AD

Why matched: Airworthiness Directives; Continental Aerospace Technologies, Inc. Reciprocating Engines With a Certain Superior Air Parts, Inc. Intake Valve Installed

2022-16-03

final rule

Airworthiness Directives; Continental Aerospace Technologies, Inc., Lycoming Engines, and Textron Lycoming/Subsidiary of Textron, Inc. Reciprocating Engines

Unsafe Condition: A manufacturing quality escape of improperly lubricated roller bearings installed in certain magnetos, which may result in overheating and magneto seizure.

Effective: Aug 15, 2022 Category: aircraft Compliance: Within 25 operating hours time-in-service (TIS) or, if any affected magneto has accumulated more ...

Why matched: Airworthiness Directives; Continental Aerospace Technologies, Inc., Lycoming Engines, and Textron Lycoming/Subsidiary of Textron, Inc. Reciprocating Engines

2022-04-04

final rule

Airworthiness Directives; Continental Aerospace Technologies, Inc. and Continental Motors Reciprocating Engines

Unsafe Condition: power loss due to oil starvation caused by failure of the fiber gasket due to improperly maintained or installed oil filter adapters

Effective: Mar 29, 2022 Category: aircraft Compliance: Before further flight

Why matched: Airworthiness Directives; Continental Aerospace Technologies, Inc. and Continental Motors Reciprocating Engines

2020-16-11

final rule

Airworthiness Directives; Continental Aerospace Technologies, Inc. (Type Certificate Previously Held by Continental Motors, Inc.) Reciprocating Engines

Unsafe Condition: reports of in-flight engine failures due to fractured cross-flow cylinder assemblies

Effective: Sep 21, 2020 Category: engine Compliance: Within 50 engine operating hours after the effective date of the AD

Why matched: Airworthiness Directives; Continental Aerospace Technologies, Inc. (Type Certificate Previously Held by Continental Motors, Inc.) Reciprocating Engines