269 ADs indexed for Saab AB, Saab Aerosystems aircraft.
Airworthiness Directives; Saab AB Airplanes
Unsafe Condition: This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. The FAA is issuing this AD to prevent reduced structural integrity of the airplane.
Why matched: Airworthiness Directives; Saab AB Airplanes
Airworthiness Directives; Saab AB, (Formerly Known as Saab AB, Support and Services) Airplanes
Unsafe Condition: fatigue cracking of principal structural elements (PSEs) and corrosion prevention and control
Why matched: Airworthiness Directives; Saab AB, (Formerly Known as Saab AB, Support and Services) Airplanes
Airworthiness Directives; Saab AB, Support and Services (Formerly Known as Saab AB, Saab Aeronautics) Airplanes
Unsafe Condition: could result in reduced structural capability and reduced controllability of the airplane.
Why matched: Airworthiness Directives; Saab AB, Support and Services (Formerly Known as Saab AB, Saab Aeronautics) Airplanes
Airworthiness Directives; Saab AB, Support and Services (Formerly Known as Saab AB, Saab Aeronautics) Airplanes
Unsafe Condition: Standard practices/structures
Why matched: Airworthiness Directives; Saab AB, Support and Services (Formerly Known as Saab AB, Saab Aeronautics) Airplanes
Airworthiness Directives; Saab AB, Support and Services (Formerly Known as Saab AB, Saab Aeronautics) Airplanes
Unsafe Condition: The possibility of inadvertently connecting the inboard harness to the outboard channel (and vice versa) of the wheel speed transducers in the main landing gear (MLG) wheel axles.
Why matched: Airworthiness Directives; Saab AB, Support and Services (Formerly Known as Saab AB, Saab Aeronautics) Airplanes
Airworthiness Directives; Saab AB, Support and Services (Formerly Known as Saab AB, Saab Aeronautics) Airplanes
Unsafe Condition: a margin to stall warning that is lower when ice speed is ON than with ice speed OFF, which could lead to inappropriate stall warnings during the landing phase and result in increased pilot workloa...
Why matched: Airworthiness Directives; Saab AB, Support and Services (Formerly Known as Saab AB, Saab Aeronautics) Airplanes
Airworthiness Directives; Saab AB, Support and Services (Formerly Known as Saab AB, Saab Aeronautics) Airplanes
Unsafe Condition: The affected airplanes must not be operated at a maximum take-off weight (MTOW) above 29,000 pounds. This condition, if not corrected, could allow flight in an uncertified envelope, leading to redu...
Why matched: Airworthiness Directives; Saab AB, Support and Services (Formerly Known as Saab AB, Saab Aeronautics) Airplanes
Airworthiness Directives; Saab AB, Support and Services (Formerly Known as Saab AB, Saab Aeronautics) Airplanes
Unsafe Condition: Excessive wear on starter generator brushes part number (P/N) 23080-2017 installed in DC starter generator P/N 23080-031 MOD M, which could lead to starter generator failure(s), possibly resulting ...
Why matched: Airworthiness Directives; Saab AB, Support and Services (Formerly Known as Saab AB, Saab Aeronautics) Airplanes
Airworthiness Directives; Transport and Commuter Category Airplanes
Unsafe Condition: Radio altimeter anomalies that are undetected by the automation or pilot, particularly close to the ground (e.g., landing flare), could lead to loss of continued safe flight and landing. Additional...
Why matched: Airworthiness Directives; Transport and Commuter Category Airplanes
Airworthiness Directives; Saab AB, Support and Services (Formerly Known as Saab AB, Saab Aeronautics) Airplanes
Unsafe Condition: untreated torque arm center pins installed on any main landing gear (MLG), which, if not corrected, could lead to failure of the torque arm center pin and free swinging of the MLG, possibly resulti...
Why matched: Airworthiness Directives; Saab AB, Support and Services (Formerly Known as Saab AB, Saab Aeronautics) Airplanes
Airworthiness Directives; Saab AB, Support and Services (Formerly Known as Saab AB, Saab Aeronautics) Airplanes
Unsafe Condition: fatigue cracking of principal structural elements (PSEs) and corrosion prevention and control
Why matched: Airworthiness Directives; Saab AB, Support and Services (Formerly Known as Saab AB, Saab Aeronautics) Airplanes
Airworthiness Directives; Saab AB, Support and Services (Formerly Known as Saab AB, Saab Aeronautics) Airplanes
Unsafe Condition: The circuit breaker for the emergency cabin lighting tripped without fault in the system, leading to an insufficiently charged emergency battery, with consequent loss of cabin emergency lighting, p...
Why matched: Airworthiness Directives; Saab AB, Support and Services (Formerly Known as Saab AB, Saab Aeronautics) Airplanes
Airworthiness Directives; Saab AB, Support and Services (Formerly Known as Saab AB, Saab Aeronautics) Airplanes
Unsafe Condition: abnormal behavior of the MLG hydraulic transfer valve due to a restriction in hydraulic flow, which could cause the MLG hydraulic transfer valve to not function properly and fail to retract, extend...
Why matched: Airworthiness Directives; Saab AB, Support and Services (Formerly Known as Saab AB, Saab Aeronautics) Airplanes
Airworthiness Directives; Saab AB, Support and Services (Formerly Known as Saab AB, Saab Aeronautics) Airplanes
Unsafe Condition: Inadvertently reversed connections of the outboard and inboard channel harnesses of the wheel speed transducers in the main landing gear (MLG) wheel axles, which could lead to wrong inputs to the a...
Why matched: Airworthiness Directives; Saab AB, Support and Services (Formerly Known as Saab AB, Saab Aeronautics) Airplanes
Airworthiness Directives; Saab AB, Support and Services (Formerly Known as Saab AB, Saab Aeronautics) Airplanes
Unsafe Condition: NLG door attachment bolts are susceptible to hydrogen embrittlement, decreasing the mechanical characteristics. This condition could lead to failure of the affected parts, which would impair the li...
Why matched: Airworthiness Directives; Saab AB, Support and Services (Formerly Known as Saab AB, Saab Aeronautics) Airplanes
Airworthiness Directives; Kidde Aerospace & Defense
Unsafe Condition: certain cargo fire extinguisher halon bottles installed in the cargo compartment had low charge pressure
Why matched: Airworthiness Directives; Kidde Aerospace & Defense
Airworthiness Directives; Saab AB, Support and Services (Formerly Known as Saab AB, Saab Aeronautics) Airplanes
Unsafe Condition: fatigue cracking of principal structural elements (PSEs) and corrosion prevention and control
Why matched: Airworthiness Directives; Saab AB, Support and Services (Formerly Known as Saab AB, Saab Aeronautics) Airplanes
Airworthiness Directives; Saab AB, Saab Aeronautics (Formerly Known as Saab AB, Saab Aerosystems) Airplanes
Unsafe Condition: deteriorated capacity of the fuel probes, which could lead to incorrect fuel reading, possibly resulting in fuel starvation and uncommanded engine in-flight shutdown, and consequent reduced control...
Why matched: Airworthiness Directives; Saab AB, Saab Aeronautics (Formerly Known as Saab AB, Saab Aerosystems) Airplanes
Airworthiness Directives; Saab AB, Saab Aeronautics (Formerly Known as Saab AB, Saab Aerosystems) Airplanes
Unsafe Condition: loose and irregular fasteners at the forward end of the nacelle upper longeron, where the bulkhead frame and struts are attached to the engine mounting structure (EMS), which could cause developmen...
Why matched: Airworthiness Directives; Saab AB, Saab Aeronautics (Formerly Known as Saab AB, Saab Aerosystems) Airplanes
Airworthiness Directives; Saab AB, Saab Aeronautics (Formerly Known as Saab AB, Saab Aerosystems) Airplanes
Unsafe Condition: cracks in the o-ring groove of magnetic fuel level indicators, which, if not detected and corrected, could result in a severe fuel leak and consequent risk of fuel starvation.
Why matched: Airworthiness Directives; Saab AB, Saab Aeronautics (Formerly Known as Saab AB, Saab Aerosystems) Airplanes
