Aeromot-Industria Mecanico Metalurgica Ltda. | Diamond Aircraft Industries GmbH | Diamond Aircraft Industries Inc | HOAC-Austria | Iniziative Industriali Italiane S.p.A. | Scheibe-Flugzeugbau GmbH Airworthiness Directives

11 ADs indexed for Aeromot-Industria Mecanico Metalurgica Ltda. | Diamond Aircraft Industries GmbH | Diamond Aircraft Industries Inc | HOAC-Austria | Iniziative Industriali Italiane S.p.A. | Scheibe-Flugzeugbau GmbH aircraft.

Models

Recent ADs

2016-23-06

final rule

Airworthiness Directives; Various Aircraft Equipped With BRP-Powertrain GmbH & Co KG 912 A Series Engine

Unsafe Condition: Manufacturing defect in certain carburetor floats (Part Number 861185) where a partial separation of the float outer skin may occur during engine operation, leading to separated particles that coul...

Effective: Dec 23, 2016 Category: aircraft Compliance: Before further flight

Why matched: Airworthiness Directives; Various Aircraft Equipped With BRP- Powertrain GmbH & Co KG 912 A Series Engine

2016-12-02

final rule

Airworthiness Directives; Various Aircraft Equipped With BRP-Powertrain GmbH & Co KG 912 A Series Engine

Unsafe Condition: A design change of the engine cylinder head temperature sensor without a concurrent revision of the engine model designation, engine part number, or cockpit indication to the pilot. This change sub...

Effective: Jul 15, 2016 Category: aircraft Compliance: Before further flight

Why matched: Airworthiness Directives; Various Aircraft Equipped With BRP- Powertrain GmbH & Co KG 912 A Series Engine

Technical illustration of an aircraft turbine engine assembly
Problem area Engine

2013-17-04

final rule

Airworthiness Directives; Various Aircraft Equipped With Rotax Aircraft Engines 912 A Series Engine

Unsafe Condition: Oil leaks in the intake channel in the area of the valve guide on some cylinder heads could increase oil consumption and result in engine stoppage.

Effective: Sep 24, 2013 Category: aircraft Compliance: Before further flight

Why matched: Airworthiness Directives; Various Aircraft Equipped With Rotax Aircraft Engines 912 A Series Engine

2013-11-01

final rule

Airworthiness Directives; Iniziative Industriali Italiane S.p.A. Airplanes

Unsafe Condition: Improper installation of the spherical bearing part number (P/N) SKF GE-10 on the central hinge lever and a crack on the weld length of the horizontal tail/elevator plane hinge assembly.

Effective: Jun 19, 2013 Category: aircraft Compliance: Before further flight

Why matched: Airworthiness Directives; Iniziative Industriali Italiane S.p.A. Airplanes

Technical illustration of an aircraft flight control surface and actuator
Problem area Flight controls

2012-15-01

final rule

Airworthiness Directives; Various Aircraft Equipped With Rotax Aircraft Engines 912 A Series Engine

Unsafe Condition: Deviation in the manufacturing process of fuel hoses installed on the pressure side of part number 893114 fuel pumps, which may not be fuel resistant, could lead to detachment of particles from the...

Effective: Aug 14, 2012 Category: aircraft Compliance: Before further flight

Why matched: Airworthiness Directives; Various Aircraft Equipped With Rotax Aircraft Engines 912 A Series Engine

Technical illustration of an aircraft fuel pump, filter, valve, and lines
Problem area Fuel system

2012-01-01

final rule

Airworthiness Directives; Various Aircraft Equipped With Rotax Aircraft Engines 912 A Series Engine

Unsafe Condition: Deviation in the manufacturing process of certain part number 888164 crankshafts may cause cracks on the surface of the crankshaft on the power take off side, which could lead to failure of the cra...

Effective: Jan 26, 2012 Category: aircraft Compliance: Within 4 hours time-in-service

Why matched: Airworthiness Directives; Various Aircraft Equipped With Rotax Aircraft Engines 912 A Series Engine

Technical illustration of an aircraft turbine engine assembly
Problem area Engine

2011-14-09

final rule

Airworthiness Directives; Various Aircraft Equipped With Rotax Aircraft Engines 912 A Series Engine

Unsafe Condition: Deviation in hardening of Part Number 944072 washers exceeds design specification, potentially leading to cracks in the washer, loosening of the magneto flywheel hub, and ignition failure, which co...

Effective: Jul 25, 2011 Category: aircraft Compliance: Before further flight

Why matched: Airworthiness Directives; Various Aircraft Equipped With Rotax Aircraft Engines 912 A Series Engine

2010-23-17

final rule

Airworthiness Directives; Various Aircraft Equipped With Rotax Aircraft Engines 912 A Series Engines

Unsafe Condition: Reports of cracks in the engine crankcase.

Effective: Dec 22, 2010 Category: aircraft Compliance: Before further flight.

Why matched: Airworthiness Directives; Various Aircraft Equipped With Rotax Aircraft Engines 912 A Series Engines

2010-17-08

final rule

Airworthiness Directives; Various Aircraft Equipped With Rotax Aircraft Engines 912 A Series Engines

Unsafe Condition: Due to high fuel pressure, caused by exceeding pressure in front of the mechanical fuel pump (e.g., due to an electrical fuel pump), in limited cases a deviation in the fuel supply could occur. Thi...

Effective: Sep 22, 2010 Category: aircraft Compliance: Within 25 hours time-in-service after September 22, 2010

Why matched: Airworthiness Directives; Various Aircraft Equipped With Rotax Aircraft Engines 912 A Series Engines

Technical illustration of an aircraft fuel pump, filter, valve, and lines
Problem area Fuel system

2003-13-06

final rule

Airworthiness Directives; Iniziative Industriali Italiane S.p.A. Models Sky Arrow 650 TC and 650 TCN Airplanes

Unsafe Condition: Cracks have been detected on the nose gear support bulkhead (STA600) of several airplanes with high operating time on grass airfields and at flight schools where hard landings have occurred. Such f...

Effective: Aug 11, 2003 Category: aircraft Compliance: Within the next 100 hours time-in-service (TIS) after August 11, 2003 (the effective date of this...

Why matched: Airworthiness Directives; Iniziative Industriali Italiane S.p.A. Models Sky Arrow 650 TC and 650 TCN Airplanes

2003-13-05 Recurring

final rule

Airworthiness Directives; Iniziative Industriali Italiane S.p.A. Models Sky Arrow 650 TC and 650 TCN Airplanes

Unsafe Condition: Cracks in the engine mount could result in failure of the engine mount, leading to separation of the engine from the airplane.

Effective: Aug 11, 2003 Category: engine Compliance: Initially within 50 hours TIS after August 11, 2003. Repetitive inspections must occur at interva...

Why matched: Airworthiness Directives; Iniziative Industriali Italiane S.p.A. Models Sky Arrow 650 TC and 650 TCN Airplanes

Technical illustration of an aircraft turbine engine assembly
Problem area Engine

View all Aeromot-Industria Mecanico Metalurgica Ltda. | Diamond Aircraft Industries GmbH | Diamond Aircraft Industries Inc | HOAC-Austria | Iniziative Industriali Italiane S.p.A. | Scheibe-Flugzeugbau GmbH ADs →