AD 99-16-06
Applicability
| Type | Manufacturer | Model | Details |
|---|---|---|---|
| aircraft | Piper Aircraft Inc. | PA-46-350P | Airworthiness Directives; The New Piper Aircraft, Inc. Model PA-46-350P Airplanes |
Unsafe Condition
The use of sheet steel material below design strength standards on the wing attach fittings may cause structural failure, resulting in wing separation from the airplane with consequent loss of control.
AI-generated summary from the source AD text. Verify against the official source before acting.
Required Actions
Install reinforcement plates to the wing forward and aft attach fittings using Piper part number 766-656 and Service Bulletin No. 1027. Special flight permits may be issued to operate the airplane to a location where the requirements can be accomplished.
AI-generated summary from the source AD text. Verify against the official source before acting.
Compliance Time
Within the next 100 hours time-in-service after September 24, 1999
AI-generated summary from the source AD text. Verify against the official source before acting.
Affected Aircraft
The New Piper Aircraft, Inc. Model PA-46-350P airplanes, serial numbers 4622191 through 4622200 and 4636001 through 4636175, delivered since January 1995.
AI-generated summary from the source AD text. Verify against the official source before acting.
Source: Official FAA Source ↗
Retrieved: Apr 8, 2026
Rights: U.S. Government Public Domain
This site is not affiliated with or endorsed by the FAA. Always verify with official sources.