AD 99-12-07

AD Final Rules - DRS_99-12-07.html
Copy URL
Print/Save as PDF
Document Versions
 Feedback
Details
AD Number:
99-12-07
Document Type:
AD Final Rules
Docket Number:
98-CE-127-AD
Subject Heading:
Airworthiness Directives; Raytheon Aircraft Company Model 1900D Airplanes
Subject:
Passenger Oxygen Container And Mask Assembly
Status:
Current
Citation:
Federal Register: June 11, 1999 (Volume 64, Number 112)
Citation Publish Date:
06/11/1999
Effective Date:
07/23/1999
Make:
Textron Aviation Inc.
Model:
1900D
Product Type:
Aircraft
Product Subtype:
Small/Large Airplane
Affected AD:
Superseded AD:
Affected By:
Superseded By:
Service/Office:
Office of Primary Responsibility:
CFR Part Reference:
Part 39 [64 FR 31491 No. 112 06/11/99]
Comments:
AIRWORTHINESS DIRECTIVES FINAL RULES: 99-12-07
CITATION:   [Federal Register: June 11, 1999 (Volume 64, Number 112)]

PAGE NUMBER:   [Page 31491]

DOCKET NUMBER:   98-CE-127-AD

AMENDMENT:   39-11191

AD NUMBER:   99-12-07

SUBJECT HEADING:   Airworthiness Directives; Raytheon Aircraft Company Model 1900D Airplanes

ACTION:   Final rule

SUMMARY:   This amendment adopts a new airworthiness directive (AD) that applies to certain Raytheon Aircraft Company (Raytheon) Model 1900D airplanes. This AD requires replacing the passenger oxygen container and mask assembly with an improved design passenger oxygen container and mask assembly. This AD is the result of an incident where a passenger had put on the oxygen mask and the lanyard pin did not automatically pull and initiate oxygen flow during a loss of airplane pressurization while in-flight. The actions specified by this AD are intended to prevent the above situation from occurring on other airplanes, which could result in passenger injury if the lanyard pin is not manually pulled in a timely manner.

DATES:   Effective July 23, 1999. The incorporation by reference of certain publications listed in the regulations is approved by the Director of the Federal Register as of July 23, 1999.

ADDRESSES:   Service information that applies to this AD may be obtained from the Raytheon Aircraft Company, PO Box 85, Wichita, Kansas 67201-0085; telephone: (800) 625-7043 or (316) 676-4556. This information may also be examined at the Federal Aviation Administration (FAA), Central Region, Office of the Regional Counsel, Attention: Rules Docket No. 98-CE-127-AD, Room 1558, 601 E. 12th Street, Kansas City, Missouri 64106; or at the Office of the Federal Register, 800 North Capitol Street, NW, suite 700, Washington, DC.

FOR FURTHER INFORMATION CONTACT:   Mr. Paul C. DeVore, Aerospace Engineer, Wichita Aircraft Certification Office, FAA, 1801 Airport Road, Mid-Continent Airport, Wichita, Kansas 67209; telephone: (316) 946-4142; facsimile: (316) 946-4407.

SUPPLEMENTARY INFORMATION:  
Events Leading to the Issuance of This AD
A proposal to amend part 39 of the Federal Aviation Regulations (14 CFR part 39) to include an AD that would apply to certain Raytheon Model 1900D airplanes was published in the Federal Register as a notice of proposed rulemaking (NPRM) on March 1, 1999 (64 FR 9939). The NPRM proposed to require replacing the existing passenger oxygen container and mask assembly, part number (P/N) 129-384005-3, with an improved design passenger oxygen container and mask assembly, P/N 129-384005-5. Accomplishment of the proposed replacement as specified in the NPRM would be accomplished by incorporating Puritan Bennett Kit No. 280041-00: Lanyard Retrofit Drop Out Box, which contains all the necessary parts and instructions.

The NPRM was the result of an incident where a passenger had put on the oxygen mask and the lanyard pin did not automatically pull and initiate oxygen flow during a loss of airplane pressurization while in-flight.

Interested persons have been afforded an opportunity to participate in the making of this amendment. One comment was received in favor of the NPRM and no comments were received on the FAA's determination of the cost to the public.

The FAA's Determination
After careful review of all available information related to the subject presented above, the FAA has determined that air safety and the public interest require the adoption of the rule as proposed except for minor editorial corrections. The FAA has determined that these minor corrections will not change the meaning of the AD and will not add any additional burden upon the public than was already proposed.

Differences Between the Service Information and This AD
The compliance time presented in Raytheon Service Bulletin SB 35-3233, Issued: December, 1998, is "as soon as possible after receipt of this Service Bulletin, but no later than 600 hours after receipt of this Service Bulletin." The FAA concurs that the action should be accomplished as soon as possible, but has no way of enforcing this compliance time. The FAA also assumes that what Raytheon means by "600 hours after receipt of this Service Bulletin" is 600 hours time-in-service (TIS).

In order to assure that the replacement required by this AD is accomplished within a reasonable period of time without inadvertently grounding the affected airplanes, the FAA is utilizing a compliance time of "within the next 200 hours TIS after the effective date of this AD".

Cost Impact
The FAA estimates that 300 airplanes in the U.S. registry will be affected by this AD, that it will take approximately 4 workhours per airplane to accomplish the replacement, and that the average labor rate is approximately $60 an hour. Parts will be provided at no cost to the owners/operators of the affected airplanes. Based on the figures presented above, the total cost impact of this AD on U.S. operators is estimated to be $72,000, or $240 per airplane.

Raytheon is also offering warranty credit for labor, as well as parts, provided that all paperwork is submitted to the manufacturer no later than December 31, 1999.

Regulatory Impact
The regulations adopted herein will not have substantial direct effects on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government. Therefore, in accordance with Executive Order 12612, it is determined that this final rule does not have sufficient federalism implications to warrant the preparation of a Federalism Assessment.

For the reasons discussed above, I certify that this action (1) is not a "significant regulatory action" under Executive Order 12866; (2) is not a "significant rule" under DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979); and (3) will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act. A copy of the final evaluation prepared for this action is contained in the Rules Docket. A copy of it may be obtained by contacting the Rules Docket at the location provided under the caption "ADDRESSES".

List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety.

Adoption of the Amendment
Accordingly, pursuant to the authority delegated to me by the Administrator, the Federal Aviation Administration amends part 39 of the Federal Aviation Regulations (14 CFR part 39) as follows:

PART 39 - AIRWORTHINESS DIRECTIVES
1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.

§ 39.13 [Amended]
2. Section 39.13 is amended by adding a new airworthiness directive (AD) to read as follows:

REGULATORY TEXT:  
99-12-07 RAYTHEON AIRCRAFT COMPANY (Type Certificate No. A24CE formerly held by the Beech Aircraft Corporation): Amendment 39-11191; Docket No. 98-CE-127-AD.

Applicability: Model 1900D airplanes, serial numbers UE-1 through UE-338, certificated in any category.

NOTE 1: This AD applies to each airplane identified in the preceding applicability provision, regardless of whether it has been modified, altered, or repaired in the area subject to the requirements of this AD. For airplanes that have been modified, altered, or repaired so that the performance of the requirements of this AD is affected, the owner/operator must request approval for an alternative method of compliance in accordance with paragraph (d) of this AD. The request should include an assessment of the effect of the modification, alteration, or repair on the unsafe condition addressed by this AD; and, if the unsafe condition has not been eliminated, the request should include specific proposed actions to address it.

Compliance: Required as indicated in the body of this AD, unless already accomplished.

To prevent failure of the oxygen mask lanyard pin to automatically pull and initiate oxygen flow during a loss of airplane pressurization while in-flight, which could result in passenger injury if the lanyard pin is not manually pulled in a timely manner, accomplish the following:

(a) Within the next 200 hours time-in-service after the effective date of this AD, replace the passenger oxygen container and mask assembly, part number 129-384005-3 (or FAA-approved equivalent part number), with an improved design passenger oxygen container and mask assembly, part number 129-384005-5 (or FAA-approved equivalent part number). Accomplish this replacement by incorporating Puritan Bennett Kit No. 280041-00: Lanyard Retrofit Drop Out Box, which contains all the necessary parts and instructions. This kit is referenced in Raytheon Mandatory Service Bulletin SB 35-3233, Issued: December, 1998.

(b) As of the effective date of this AD, no person may install, on any affected airplane, a passenger oxygen container and mask assembly that is not of an improved design, part number 129-384005-5 (or FAA-approved equivalent part number).

(c) Special flight permits may be issued in accordance with sections 21.197 and 21.199 of the Federal Aviation Regulations (14 CFR 21.197 and 21.199) to operate the airplane to a location where the requirements of this AD can be accomplished.

(d) An alternative method of compliance or adjustment of the compliance time that provides an equivalent level of safety may be approved by the Manager, Wichita Aircraft Certification Office (ACO), 1801 Airport Road, Room 100, Mid-Continent Airport, Wichita, Kansas 67209. The request shall be forwarded through an appropriate FAA Maintenance Inspector, who may add comments and then send it to the Manager, Wichita ACO.

NOTE 2: Information concerning the existence of approved alternative methods of compliance with this AD, if any, may be obtained from the Wichita ACO.

(e) The replacements required by this AD shall be done in accordance with Puritan Bennett Kit No. 280041-00: Lanyard Retrofit Drop Out Box, as referenced in Raytheon Mandatory Service Bulletin SB 35-3233, Issued: December, 1998. This incorporation by reference was approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies may be obtained from the Raytheon Aircraft Corporation, P.O. Box 85, Wichita, Kansas 67201-0085. Copies may be inspected at the FAA, Central Region, Office of the Regional Counsel, Room 1558, 601 E. 12th Street, Kansas City, Missouri, or at the Office of the Federal Register, 800 North Capitol Street, NW, suite 700, Washington, DC.

(f) This amendment becomes effective on July 23, 1999.

FOOTER: