AD 98-12-04

final rule

Airworthiness Directives; Glaser-Dirks Flugzeugbau GmbH Model DG-500M Gliders

AD Number
98-12-04
Status
final_rule
Effective Date
Product Category
aircraft
Docket
98-CE-09-AD
FR Citation
Federal Register: June 04, 1998 (Volume 63, Number 107)
Technical illustration of an aircraft flight control surface and actuator
Problem area Flight controls

Applicability

TypeManufacturerModelDetails
aircraft DG Flugzeugbau GmbH DG-500M Airworthiness Directives; Glaser-Dirks Flugzeugbau GmbH Model DG-500M Gliders

Unsafe Condition

Rudder vibrations caused by flow separation at the rudder gap, which could result in flutter with consequent loss of rudder control.

AI-generated summary from the source AD text. Verify against the official source before acting.

Required Actions

Install a rudder gap seal in accordance with the maintenance manual referenced in Glaser-Dirks TN No. 843/5, and modify the cooling liquid reservoir mount per Glaser-Dirks Working Instruction No. 1 for TN 843/5.

AI-generated summary from the source AD text. Verify against the official source before acting.

Compliance Time

within the next 3 calendar months after the effective date of this AD, unless already accomplished

AI-generated summary from the source AD text. Verify against the official source before acting.

Affected Aircraft

Glaser-Dirks Flugzeugbau GmbH Model DG-500M gliders, all serial numbers

AI-generated summary from the source AD text. Verify against the official source before acting.

Federal Register Abstract

Rudder Gap Seal

Applicability Source Text

Show captured applicability text from the source AD
AD Final Rules - DRS_98-12-04.html
Copy URL
Print/Save as PDF
Document Versions
 Feedback
Details
AD Number:
98-12-04
Document Type:
AD Final Rules
Docket Number:
98-CE-09-AD
Subject Heading:
Airworthiness Directives; Glaser-Dirks Flugzeugbau GmbH Model DG-500M Gliders
Subject:
Rudder Gap Seal
Status:
Current
Citation:
Federal Register: June 04, 1998 (Volume 63, Number 107)
Citation Publish Date:
06/04/1998
Effective Date:
07/21/1998
Make:
DG Flugzeugbau GmbH
Model:
DG-500M
Product Type:
Aircraft
Product Subtype:
Glider
Affected AD:
Superseded AD:
Affected By:
Superseded By:
Service/Office:
Office of Primary Responsibility:
CFR Part Reference:
Part 39 [63 FR 30372 No. 107 06/04/98]
Comments:
AIRWORTHINESS DIRECTIVES FINAL RULES: 98-12-04
CITATION:   [Federal Register: June 04, 1998 (Volume 63, Number 107)]

PAGE NUMBER:   [Page 30372]

DOCKET NUMBER:   98-CE-09-AD

AMENDMENT:   39-10561

AD NUMBER:   98-12-04

SUBJECT HEADING:   Airworthiness Directives; Glaser-Dirks Flugzeugbau GmbH Model DG-500M Gliders

ACTION:   Final rule

SUMMARY:   This amendment adopts a new airworthiness directive (AD) that applies to all Glaser-Dirks Flugzeugbau GmbH (Glaser-Dirks) Model DG-500M gliders. This AD requires installing a rudder gap seal and modifying the cooling liquid reservoir mount. This AD is the result of mandatory continuing airworthiness information (MCAI) issued by the airworthiness authority for Germany. The actions specified by this AD are intended to prevent rudder vibrations caused by flow separation at the rudder gap, which could result in flutter with consequent loss of rudder control.

DATES:   Effective July 21, 1998. The incorporation by reference of certain publications listed in the regulations is approved by the Director of the Federal Register as of July 21, 1998.

ADDRESSES:   Service information that applies to this AD may be obtained from DG Flugzeugbau GmbH, Postfach 4120, D-76625 Bruchsal 4, Germany; telephone: +49 7257-89-0; facsimile: +49 7257-8922. This information may also be examined at the Federal Aviation Administration (FAA), Central Region, Office of the Regional Counsel, Attention: Rules Docket No. 98-CE-09-AD, Room 1558, 601 E. 12th Street, Kansas City, Missouri 64106; or at the Office of the Federal Register, 800 North Capitol Street, NW, suite 700, Washington, DC.

FOR FURTHER INFORMATION CONTACT:   Mr. Mike Kiesov, Aerospace Engineer, Small Airplane Directorate, Aircraft Certification Service, FAA, 1201 Walnut, suite 900, Kansas City, Missouri 64106; telephone: (816) 426-6934; facsimile: (816) 426-2169.

SUPPLEMENTARY INFORMATION:  

Events Leading to the Issuance of This AD
A proposal to amend part 39 of the Federal Aviation Regulations (14 CFR part 39) to include an AD that would apply to all Glaser-Dirks Model DG-500M gliders was published in the Federal Register as a notice of proposed rulemaking (NPRM) on March 20, 1998 (63 FR 13581). The NPRM proposed to require installing a rudder gap seal and modifying the cooling liquid reservoir mount. Accomplishment of the proposed installation as specified in the NPRM would be required in accordance with the maintenance manual. Accomplishment of the proposed modification to the cooling liquid reservoir mount as specified in the NPRM would be required in accordance with Glaser-Dirks Working Instruction No. 1 for TN 843/5, dated November 5, 1992, as referenced in Glaser-Dirks TN No. 843/5, dated November 30, 1992.

The NPRM was the result of mandatory continuing airworthiness information (MCAI) issued by the airworthiness authority for Germany.

Interested persons have been afforded an opportunity to participate in the making of this amendment. No comments were received on the proposed rule or the FAA's determination of the cost to the public.

The FAA's Determination
After careful review of all available information related to the subject presented above, the FAA has determined that air safety and the public interest require the adoption of the rule as proposed except for minor editorial corrections. The FAA has determined that these minor corrections will not change the meaning of the AD and will not add any additional burden upon the public than was already proposed.

Compliance Time of This AD
Although the rudder vibrations identified in this AD occur during flight, this unsafe condition is not a result of the number of times the glider is operated. The chance of this situation occurring is the same for a glider with 10 hours time-in-service (TIS) as it is for a glider with 500 hours TIS. For this reason, the FAA has determined that a compliance based on calendar time should be utilized in this AD in order to assure that the unsafe condition is addressed on all gliders in a reasonable time period.

Cost Impact
The FAA estimates that 5 gliders in the U.S. registry will be affected by this AD, that it will take approximately 4 workhours per glider to accomplish this action, and that the average labor rate is approximately $60 an hour. Parts cost approximately $40 per glider. Based on these figures, the total cost impact of this AD on U.S. operators is estimated to be $1,400, or $280 per glider.

Regulatory Impact
The regulations adopted herein will not have substantial direct effects on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government. Therefore, in accordance with Executive Order 12612, it is determined that this final rule does not have sufficient federalism implications to warrant the preparation of a Federalism Assessment.

For the reasons discussed above, I certify that this action (1) is not a "significant regulatory action" under Executive Order 12866; (2) is not a "significant rule" under DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979); and (3) will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act. A copy of the final evaluation prepared for this action is contained in the Rules Docket. A copy of it may be obtained by contacting the Rules Docket at the location provided under the caption "ADDRESSES".

List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety.

Adoption of the Amendment
Accordingly, pursuant to the authority delegated to me by the Administrator, the Federal Aviation Administration amends part 39 of the Federal Aviation Regulations (14 CFR part 39) as follows:

PART 39 - AIRWORTHINESS DIRECTIVES
1. The authority citation for part 39 continues to read as follows: Authority: 49 U.S.C. 106(g), 40113, 44701.

§ 39.13 [Amended]
2. Section 39.13 is amended by adding a new airworthiness directive (AD) to read as follows:

REGULATORY TEXT:  
98-12-04 GLASER-DIRKS FLUGZEUGBAU GMBH: Amendment 39-10561; Docket No. 98-CE-09-AD.
Applicability: Model DG-500M gliders, all serial numbers, certificated in any category.

NOTE 1: This AD applies to each glider identified in the preceding applicability provision, regardless of whether it has been modified, altered, or repaired in the area subject to the requirements of this AD. For gliders that have been modified, altered, or repaired so that the performance of the requirements of this AD is affected, the owner/operator must request approval for an alternative method of compliance in accordance with paragraph (d) of this AD. The request should include an assessment of the effect of the modification, alteration, or repair on the unsafe condition addressed by this AD; and, if the unsafe condition has not been eliminated, the request should include specific proposed actions to address it.

Compliance: Required within the next 3 calendar months after the effective date of this AD, unless already accomplished.

To prevent rudder vibrations caused by flow separation at the rudder gap, which could result in flutter with consequent loss of rudder control, accomplish the following:

(a) Install a rudder gap seal in accordance with the instructions in the maintenance manual, as referenced in Glaser-Dirks Technical Note (TN) No. 843/5, dated November 30, 1992.

(b) Modify the cooling liquid reservoir mount in accordance with Glaser-Dirks Working Instruction No. 1 for TN 843/5, dated November 5, 1992, as referenced in Glaser-Dirks TN No. 843/5, dated November 30, 1992.

(c) Special flight permits may be issued in accordance with sections 21.197 and 21.199 of the Federal Aviation Regulations (14 CFR 21.197 and 21.199) to operate the glider to a location where the requirements of this AD can be accomplished.

(d) An alternative method of compliance or adjustment of the compliance time that provides an equivalent level of safety may be approved by the Manager, Small Airplane Directorate, FAA, 1201 Walnut, suite 900, Kansas City, Missouri 64106. The request shall be forwarded through an appropriate FAA Maintenance Inspector, who may add comments and then send it to the Manager, Small Airplane Directorate.

NOTE 2: Information concerning the existence of approved alternative methods of compliance with this AD, if any, may be obtained from the Small Airplane Directorate.

(e) Questions or technical information related to Glaser-Dirks Technical Note No. 843/5, dated November 30, 1992, should be directed to DG Flugzeugbau GmbH, Postfach 4120, D-76625 Bruchsal 4, Germany; telephone: +49 7257-89-0; facsimile: +49 7257-8922. This service information may be examined at the FAA, Central Region, Office of the Regional Counsel, Room 1558, 601 E. 12th Street, Kansas City, Missouri 64106.

(f) The modification required by this AD shall be done in accordance with Glaser-Dirks Working Instruction No. 1 for Technical Note 843/5, dated November 5, 1992, as referenced in Glaser-Dirks Technical Note No. 843/5, dated November 30, 1992. This incorporation by reference was approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies may be obtained from DG Flugzeugbau GmbH, Postfach 4120, D-76625 Bruchsal 4, Germany. Copies may be inspected at the FAA, Central Region, Office of the Regional Counsel, Room 1558, 601 E. 12th Street, Kansas City, Missouri, or at the Office of the Federal Register, 800 North Capitol Street, NW, suite 700, Washington, DC.

NOTE 3: The subject of this AD is addressed in German AD 93-010, dated January 5, 1993.

(g) This amendment becomes effective on July 21, 1998.

FOOTER:

Document Text

Show stored source text (verify against official source)
AD Final Rules - DRS_98-12-04.html
Copy URL
Print/Save as PDF
Document Versions
 Feedback
Details
AD Number:
98-12-04
Document Type:
AD Final Rules
Docket Number:
98-CE-09-AD
Subject Heading:
Airworthiness Directives; Glaser-Dirks Flugzeugbau GmbH Model DG-500M Gliders
Subject:
Rudder Gap Seal
Status:
Current
Citation:
Federal Register: June 04, 1998 (Volume 63, Number 107)
Citation Publish Date:
06/04/1998
Effective Date:
07/21/1998
Make:
DG Flugzeugbau GmbH
Model:
DG-500M
Product Type:
Aircraft
Product Subtype:
Glider
Affected AD:
Superseded AD:
Affected By:
Superseded By:
Service/Office:
Office of Primary Responsibility:
CFR Part Reference:
Part 39 [63 FR 30372 No. 107 06/04/98]
Comments:
AIRWORTHINESS DIRECTIVES FINAL RULES: 98-12-04
CITATION:   [Federal Register: June 04, 1998 (Volume 63, Number 107)]

PAGE NUMBER:   [Page 30372]

DOCKET NUMBER:   98-CE-09-AD

AMENDMENT:   39-10561

AD NUMBER:   98-12-04

SUBJECT HEADING:   Airworthiness Directives; Glaser-Dirks Flugzeugbau GmbH Model DG-500M Gliders

ACTION:   Final rule

SUMMARY:   This amendment adopts a new airworthiness directive (AD) that applies to all Glaser-Dirks Flugzeugbau GmbH (Glaser-Dirks) Model DG-500M gliders. This AD requires installing a rudder gap seal and modifying the cooling liquid reservoir mount. This AD is the result of mandatory continuing airworthiness information (MCAI) issued by the airworthiness authority for Germany. The actions specified by this AD are intended to prevent rudder vibrations caused by flow separation at the rudder gap, which could result in flutter with consequent loss of rudder control.

DATES:   Effective July 21, 1998. The incorporation by reference of certain publications listed in the regulations is approved by the Director of the Federal Register as of July 21, 1998.

ADDRESSES:   Service information that applies to this AD may be obtained from DG Flugzeugbau GmbH, Postfach 4120, D-76625 Bruchsal 4, Germany; telephone: +49 7257-89-0; facsimile: +49 7257-8922. This information may also be examined at the Federal Aviation Administration (FAA), Central Region, Office of the Regional Counsel, Attention: Rules Docket No. 98-CE-09-AD, Room 1558, 601 E. 12th Street, Kansas City, Missouri 64106; or at the Office of the Federal Register, 800 North Capitol Street, NW, suite 700, Washington, DC.

FOR FURTHER INFORMATION CONTACT:   Mr. Mike Kiesov, Aerospace Engineer, Small Airplane Directorate, Aircraft Certification Service, FAA, 1201 Walnut, suite 900, Kansas City, Missouri 64106; telephone: (816) 426-6934; facsimile: (816) 426-2169.

SUPPLEMENTARY INFORMATION:  

Events Leading to the Issuance of This AD
A proposal to amend part 39 of the Federal Aviation Regulations (14 CFR part 39) to include an AD that would apply to all Glaser-Dirks Model DG-500M gliders was published in the Federal Register as a notice of proposed rulemaking (NPRM) on March 20, 1998 (63 FR 13581). The NPRM proposed to require installing a rudder gap seal and modifying the cooling liquid reservoir mount. Accomplishment of the proposed installation as specified in the NPRM would be required in accordance with the maintenance manual. Accomplishment of the proposed modification to the cooling liquid reservoir mount as specified in the NPRM would be required in accordance with Glaser-Dirks Working Instruction No. 1 for TN 843/5, dated November 5, 1992, as referenced in Glaser-Dirks TN No. 843/5, dated November 30, 1992.

The NPRM was the result of mandatory continuing airworthiness information (MCAI) issued by the airworthiness authority for Germany.

Interested persons have been afforded an opportunity to participate in the making of this amendment. No comments were received on the proposed rule or the FAA's determination of the cost to the public.

The FAA's Determination
After careful review of all available information related to the subject presented above, the FAA has determined that air safety and the public interest require the adoption of the rule as proposed except for minor editorial corrections. The FAA has determined that these minor corrections will not change the meaning of the AD and will not add any additional burden upon the public than was already proposed.

Compliance Time of This AD
Although the rudder vibrations identified in this AD occur during flight, this unsafe condition is not a result of the number of times the glider is operated. The chance of this situation occurring is the same for a glider with 10 hours time-in-service (TIS) as it is for a glider with 500 hours TIS. For this reason, the FAA has determined that a compliance based on calendar time should be utilized in this AD in order to assure that the unsafe condition is addressed on all gliders in a reasonable time period.

Cost Impact
The FAA estimates that 5 gliders in the U.S. registry will be affected by this AD, that it will take approximately 4 workhours per glider to accomplish this action, and that the average labor rate is approximately $60 an hour. Parts cost approximately $40 per glider. Based on these figures, the total cost impact of this AD on U.S. operators is estimated to be $1,400, or $280 per glider.

Regulatory Impact
The regulations adopted herein will not have substantial direct effects on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government. Therefore, in accordance with Executive Order 12612, it is determined that this final rule does not have sufficient federalism implications to warrant the preparation of a Federalism Assessment.

For the reasons discussed above, I certify that this action (1) is not a "significant regulatory action" under Executive Order 12866; (2) is not a "significant rule" under DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979); and (3) will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act. A copy of the final evaluation prepared for this action is contained in the Rules Docket. A copy of it may be obtained by contacting the Rules Docket at the location provided under the caption "ADDRESSES".

List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety.

Adoption of the Amendment
Accordingly, pursuant to the authority delegated to me by the Administrator, the Federal Aviation Administration amends part 39 of the Federal Aviation Regulations (14 CFR part 39) as follows:

PART 39 - AIRWORTHINESS DIRECTIVES
1. The authority citation for part 39 continues to read as follows: Authority: 49 U.S.C. 106(g), 40113, 44701.

§ 39.13 [Amended]
2. Section 39.13 is amended by adding a new airworthiness directive (AD) to read as follows:

REGULATORY TEXT:  
98-12-04 GLASER-DIRKS FLUGZEUGBAU GMBH: Amendment 39-10561; Docket No. 98-CE-09-AD.
Applicability: Model DG-500M gliders, all serial numbers, certificated in any category.

NOTE 1: This AD applies to each glider identified in the preceding applicability provision, regardless of whether it has been modified, altered, or repaired in the area subject to the requirements of this AD. For gliders that have been modified, altered, or repaired so that the performance of the requirements of this AD is affected, the owner/operator must request approval for an alternative method of compliance in accordance with paragraph (d) of this AD. The request should include an assessment of the effect of the modification, alteration, or repair on the unsafe condition addressed by this AD; and, if the unsafe condition has not been eliminated, the request should include specific proposed actions to address it.

Compliance: Required within the next 3 calendar months after the effective date of this AD, unless already accomplished.

To prevent rudder vibrations caused by flow separation at the rudder gap, which could result in flutter with consequent loss of rudder control, accomplish the following:

(a) Install a rudder gap seal in accordance with the instructions in the maintenance manual, as referenced in Glaser-Dirks Technical Note (TN) No. 843/5, dated November 30, 1992.

(b) Modify the cooling liquid reservoir mount in accordance with Glaser-Dirks Working Instruction No. 1 for TN 843/5, dated November 5, 1992, as referenced in Glaser-Dirks TN No. 843/5, dated November 30, 1992.

(c) Special flight permits may be issued in accordance with sections 21.197 and 21.199 of the Federal Aviation Regulations (14 CFR 21.197 and 21.199) to operate the glider to a location where the requirements of this AD can be accomplished.

(d) An alternative method of compliance or adjustment of the compliance time that provides an equivalent level of safety may be approved by the Manager, Small Airplane Directorate, FAA, 1201 Walnut, suite 900, Kansas City, Missouri 64106. The request shall be forwarded through an appropriate FAA Maintenance Inspector, who may add comments and then send it to the Manager, Small Airplane Directorate.

NOTE 2: Information concerning the existence of approved alternative methods of compliance with this AD, if any, may be obtained from the Small Airplane Directorate.

(e) Questions or technical information related to Glaser-Dirks Technical Note No. 843/5, dated November 30, 1992, should be directed to DG Flugzeugbau GmbH, Postfach 4120, D-76625 Bruchsal 4, Germany; telephone: +49 7257-89-0; facsimile: +49 7257-8922. This service information may be examined at the FAA, Central Region, Office of the Regional Counsel, Room 1558, 601 E. 12th Street, Kansas City, Missouri 64106.

(f) The modification required by this AD shall be done in accordance with Glaser-Dirks Working Instruction No. 1 for Technical Note 843/5, dated November 5, 1992, as referenced in Glaser-Dirks Technical Note No. 843/5, dated November 30, 1992. This incorporation by reference was approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies may be obtained from DG Flugzeugbau GmbH, Postfach 4120, D-76625 Bruchsal 4, Germany. Copies may be inspected at the FAA, Central Region, Office of the Regional Counsel, Room 1558, 601 E. 12th Street, Kansas City, Missouri, or at the Office of the Federal Register, 800 North Capitol Street, NW, suite 700, Washington, DC.

NOTE 3: The subject of this AD is addressed in German AD 93-010, dated January 5, 1993.

(g) This amendment becomes effective on July 21, 1998.

FOOTER:

Source: Official FAA Source ↗

Retrieved: Apr 8, 2026

Rights: U.S. Government Public Domain

This site is not affiliated with or endorsed by the FAA. Always verify with official sources.