AD 98-03-01

AD Final Rules - DRS_98-03-01.html
Copy URL
Print/Save as PDF
Document Versions
 Feedback
Details
AD Number:
98-03-01
Document Type:
AD Final Rules
Docket Number:
97-NM-189-AD
Subject Heading:
Airworthiness Directives; Dassault Model Mystere Falcon 200 Series Airplanes
Subject:
Polyurethane Foam In Fuselage Fuel Tanks
Status:
Current
Citation:
This information is not available.
Citation Publish Date:
Effective Date:
03/04/1998
Make:
Dassault Aviation
Model:
Mystere-Falcon 200
Product Type:
Aircraft
Product Subtype:
Large Airplane
Affected AD:
Superseded AD:
Affected By:
Superseded By:
Service/Office:
Office of Primary Responsibility:
CFR Part Reference:
Part 39 [63 FR 4161 NO. 18 01/28/98]
Comments:
AIRWORTHINESS DIRECTIVES FINAL RULES: 98-03-01
CITATION:   This information is not available.

PAGE NUMBER:  

DOCKET NUMBER:   97-NM-189-AD

AMENDMENT:   39-10293

AD NUMBER:   98-03-01

SUBJECT HEADING:   Airworthiness Directives; Dassault Model Mystere Falcon 200 Series Airplanes

ACTION:   Final rule

SUMMARY:   This amendment adopts a new airworthiness directive (AD), applicable to all Dassault Model Mystere Falcon 200 series airplanes, that requires reducing the life limit of the polyurethane foam used in the fuselage fuel tanks. This amendment is prompted by issuance of mandatory continuing airworthiness information by a foreign civil airworthiness authority. The actions specified by this AD are intended to ensure replacement of the polyurethane foam in the fuselage fuel tanks when it has reached its maximum life limit; polyurethane foam that is not replaced in a timely manner could result in fuel contamination or increased risk of explosion in the fuselage fuel tank.

DATES:   Effective March 4, 1998.

ADDRESSES:   Information pertaining to this rulemaking action may be examined at the Federal Aviation Administration (FAA), Transport Airplane Directorate, Rules Docket, 1601 Lind Avenue, SW., Renton, Washington; or at the Office of the Federal Register, 800 North Capitol Street, NW., suite 700, Washington, DC.

FOR FURTHER INFORMATION CONTACT:   Norman B. Martenson, Manager, International Branch, ANM-116, FAA, Transport Airplane Directorate, 1601 Lind Avenue, SW., Renton, Washington 98055-4056; telephone (425) 227-2110; fax (425) 227-1149.

SUPPLEMENTARY INFORMATION:  
A proposal to amend part 39 of the Federal Aviation Regulations (14 CFR part 39) to include an airworthiness directive (AD) that is applicable to all Dassault Model Mystere Falcon 200 series airplanes was published in the Federal Register on November 26, 1997 (62 FR 63041). That action proposed to require reducing the life limit of the polyurethane foam used in the fuselage fuel tanks.

Comments
Interested persons have been afforded an opportunity to participate in the making of this amendment. No comments were submitted in response to the proposal or the FAA's determination of the cost to the public.

Conclusion
The FAA has determined that air safety and the public interest require the adoption of the rule as proposed.

Cost Impact
The FAA estimates that 20 Model Mystere Falcon 200 series airplanes of U.S. registry will be affected by this AD, that it will take approximately 8 work hours per airplane to accomplish the required actions, and that the average labor rate is $60 per work hour. Required parts will cost approximately $4,000 per airplane. Based on these figures, the cost impact of the AD on U.S. operators is estimated to be $89,600, or $4,480 per airplane.

The cost impact figure discussed above is based on assumptions that no operator has yet accomplished any of the requirements of this AD action, and that no operator would accomplish those actions in the future if this AD were not adopted.

Regulatory Impact
The regulations adopted herein will not have substantial direct effects on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government. Therefore, in accordance with Executive Order 12612, it is determined that this final rule does not have sufficient federalism implications to warrant the preparation of a Federalism Assessment.

For the reasons discussed above, I certify that this action (1) is not a "significant regulatory action" under Executive Order 12866; (2) is not a "significant rule"under DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979); and (3) will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act. A final evaluation has been prepared for this action and it is contained in the Rules Docket. A copy of it may be obtained from the Rules Docket at the location provided under the caption "ADDRESSES."

List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Safety.

Adoption of the Amendment
Accordingly, pursuant to the authority delegated to me by the Administrator, the Federal Aviation Administration amends part 39 of the Federal Aviation Regulations (14 CFR part 39) as follows:

PART 39 - AIRWORTHINESS DIRECTIVES

1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.

§ 39.13 [Amended]

2. Section 39.13 is amended by adding the following new airworthiness directive:

REGULATORY TEXT:  
98-03-01 DASSAULT AVIATION: Amendment 39-10293. Docket 97-NM-189-AD.

Applicability: All Model Mystere Falcon 200 series airplanes, certificated in any category.

NOTE 1: This AD applies to each airplane identified in the preceding applicability provision, regardless of whether it has been modified, altered, or repaired in the area subject to the requirements of this AD. For airplanes that have been modified, altered, or repaired so that the performance of the requirements of this AD is affected, the owner/operator must request approval for an alternative method of compliance in accordance with paragraph (b) of this AD. The request should include an assessment of the effect of the modification, alteration, or repair on the unsafe condition addressed by this AD; and, if the unsafe condition has not been eliminated, the request should include specific proposed actions to address it.

Compliance: Required as indicated, unless accomplished previously.

To prevent fuel contamination or increased risk of explosion in the fuselage fuel tank as a result of degradation of the polyurethane foam used in the fuselage fuel tanks, accomplish the following:

(a) Replace the polyurethane foam in the fuselage fuel tanks with new foam, in accordance with procedures specified in Chapter 5 of the Dassault Falcon 200 Maintenance Manual, at the later of the times specified in paragraph (a)(1) or (a)(2) of this AD. Thereafter, replace the foam with new foam at intervals not to exceed 8 years.

(1) Within 8 years after the last replacement of the foam; or

(2) Within 7 months or 350 flight hours after the effective date of this AD, whichever occurs first.

(b) An alternative method of compliance or adjustment of the compliance time that provides an acceptable level of safety may be used if approved by the Manager, International Branch, ANM-116, FAA, Transport Airplane Directorate. Operators shall submit their requests through an appropriate FAA Principal Maintenance Inspector, who may add comments and then send it to the Manager, International Branch, ANM-116.

NOTE 2: Information concerning the existence of approved alternative methods of compliance with this AD, if any, may be obtained from the International Branch, ANM-116.

(c) Special flight permits may be issued in accordance with sections 21.197 and 21.199 of the Federal Aviation Regulations (14 CFR 21.197 and 21.199) to operate the airplane to a location where the requirements of this AD can be accomplished.

NOTE 3: The subject of this AD is addressed in French airworthiness directive (CN) 96-078- 021(B), dated April 10, 1996.

(d) This amendment becomes effective on March 4, 1998.

FOOTER: