AD 98-01-10
Applicability
| Type | Manufacturer | Model | Details |
|---|---|---|---|
| aircraft | Embraer S.A. | EMB-110P1 | Airworthiness Directives; EMPRESA BRASILEIRA DE AERONAUTICA S.A. Models EMB-110P1 and EMB-110P2 Airplanes |
| aircraft | Embraer S.A. | EMB-110P2 | Airworthiness Directives; EMPRESA BRASILEIRA DE AERONAUTICA S.A. Models EMB-110P1 and EMB-110P2 Airplanes |
Unsafe Condition
Failure of the MLG wheel axle/piston tube assembly caused by fatigue cracking, which could result in loss of control of the airplane during landing operations.
AI-generated summary from the source AD text. Verify against the official source before acting.
Required Actions
Inspect (one-time) the fillet area of each MLG wheel axle/piston tube support junction area to ensure it is free of cracks, replace any MLG wheel axle/piston tube assembly if a crack is found, and rework this area on both the left and right MLG's as terminating action for repetitive inspections required by AD 87-03-10.
AI-generated summary from the source AD text. Verify against the official source before acting.
Compliance Time
within the next 100 landings after the effective date of this AD, unless already accomplished
AI-generated summary from the source AD text. Verify against the official source before acting.
Affected Aircraft
Models EMB-110P1 and EMB-110P2 airplanes, all serial numbers, certificated in any category, that do not have an 'R' stamped on both the left and right main landing gear (MLG) wheel axle/piston tube assembly end-piece.
AI-generated summary from the source AD text. Verify against the official source before acting.
Source: Official FAA Source ↗
Retrieved: Apr 8, 2026
Rights: U.S. Government Public Domain
This site is not affiliated with or endorsed by the FAA. Always verify with official sources.