AD 97-06-12
final rule
Applicability
| Type | Manufacturer | Model | Details |
|---|---|---|---|
| aircraft | BAE Systems (Operations) Limited | Avro 146-RJ100A | Airworthiness Directives; British Aerospace Models BAe 146 and Avro 146-RJ Series Airplanes |
| aircraft | BAE Systems (Operations) Limited | Avro 146-RJ70A | Airworthiness Directives; British Aerospace Models BAe 146 and Avro 146-RJ Series Airplanes |
| aircraft | BAE Systems (Operations) Limited | Avro 146-RJ85A | Airworthiness Directives; British Aerospace Models BAe 146 and Avro 146-RJ Series Airplanes |
| aircraft | BAE Systems (Operations) Limited | BAe 146-100A | Airworthiness Directives; British Aerospace Models BAe 146 and Avro 146-RJ Series Airplanes |
| aircraft | BAE Systems (Operations) Limited | BAe 146-200A | Airworthiness Directives; British Aerospace Models BAe 146 and Avro 146-RJ Series Airplanes |
| aircraft | BAE Systems (Operations) Limited | BAe 146-300A | Airworthiness Directives; British Aerospace Models BAe 146 and Avro 146-RJ Series Airplanes |
Unsafe Condition
Failure of the main fitting of the nose landing gear (NLG), which could lead to collapse of the NLG during landing.
AI-generated summary from the source AD text. Verify against the official source before acting.
Required Actions
Conduct eddy current or ultra sensitivity penetrant inspections of the NLG in accordance with specified service bulletins. Inspections must be repeated at intervals not exceeding 8,000 landings (or 4,000 landings for certain part numbers). If cracking is detected, replace or repair the NLG prior to further flight.
AI-generated summary from the source AD text. Verify against the official source before acting.
Compliance Time
Prior to the accumulation of 16,000 total landings or within 30 days after the effective date of prior ADs, whichever occurs later. Repeat inspections at intervals not exceeding specified landing counts.
AI-generated summary from the source AD text. Verify against the official source before acting.
Affected Aircraft
BAE Systems (Operations) Limited models Avro 146-RJ100A, Avro 146-RJ70A, Avro 146-RJ85A, BAe 146-100A, BAe 146-200, BAe 146-300, BAe 146-301, BAe 146-500 series airplanes with NLG part numbers 200876001, 200876002, 200876003, or 201138002.
AI-generated summary from the source AD text. Verify against the official source before acting.
Federal Register Abstract
Nose Landing Gear Main Fitting
Applicability Source Text
Show captured applicability text from the source AD
AD Final Rules - DRS_97-06-12.html Copy URL Print/Save as PDF Document Versions Feedback Details AD Number: 97-06-12 Document Type: AD Final Rules Docket Number: 96-NM-26-AD Subject Heading: Airworthiness Directives; British Aerospace Models BAe 146 and Avro 146-RJ Series Airplanes Subject: Nose Landing Gear Main Fitting Status: Current Citation: Federal Register: March 18, 1997 (Volume 62, Number 52) Citation Publish Date: 03/18/1997 Effective Date: 04/21/1997 Make: BAE Systems (Operations) Limited Model: Avro 146-RJ100A | Avro 146-RJ70A | Avro 146-RJ85A | BAe 146-100A | BAe 146-200A | BAe 146-300A Product Type: Aircraft Product Subtype: Large Airplane Affected AD: Superseded AD: Affected By: Superseded By: Service/Office: Office of Primary Responsibility: CFR Part Reference: Part 39 [62 FR 12740 NO. 52 03/18/97] Comments: AIRWORTHINESS DIRECTIVES FINAL RULES: 97-06-12 CITATION: [Federal Register: March 18, 1997 (Volume 62, Number 52)] PAGE NUMBER: [Page 12740] DOCKET NUMBER: 96-NM-26-AD AMENDMENT: 39-9969 AD NUMBER: 97-06-12 SUBJECT HEADING: Airworthiness Directives; British Aerospace Models BAe 146 and Avro 146-RJ Series Airplanes ACTION: Final rule SUMMARY: This amendment supersedes two existing airworthiness directives (AD), applicable to British Aerospace Model BAe 146 and Avro 146-RJ series airplanes, that currently require inspections to detect cracking of the upper main fitting of the nose landing gear (NLG), and replacement or repair of cracked parts, if necessary. Those actions were prompted by reports of cracking in the main fittings of the NLG. This amendment requires that, for certain airplanes, the inspections be accomplished at reduced intervals. This amendment is prompted by the results of new analyses of the cracking that were conducted by the manufacturer of the NLG. The actions specified by this AD are intended to prevent failure of the main fitting, which could lead to collapse of the NLG during landing. DATES: Effective April 21, 1997. The incorporation by reference of British Aerospace Service Bulletin S.B. 32-131, Revision 3, dated 10/18/95, as listed in the regulations, is approved by the Director of the Federal Register as of April 21, 1997. The incorporation by reference of British Aerospace Service Bulletin S.B. 32-131, Revision 2, dated 7/10/93, as listed in the regulations, was approved previously by the Director of the Federal Register as of April 6, 1995 (60 FR 12413, 3/7/95). The incorporation by reference of British Aerospace Service Bulletin S.B. 32-131, Revision 1, dated 11/12/92, as listed in the regulations, was approved previously by the Director of the Federal Register as of 10/7/93 (58 FR 47036, 9/7/93). The incorporation by reference of British Aerospace Service Bulletin S.B. 32-131, dated 12/6/91, as listed in the regulations, was approved previously by the Director of the Federal Register as of 1/12/93 (57 FR 57883, 12/8/92). ADDRESSES: The service information referenced in this AD may be obtained from British Aerospace Holding, Inc., Avro International Aerospace Division, P.O. Box 16039, Dulles International Airport, Washington DC 20041-6039. This information may be examined at the Federal Aviation Administration (FAA), Transport Airplane Directorate, Rules Docket, 1601 Lind Avenue, SW., Renton, Washington; or at the Office of the Federal Register, 800 North Capitol Street, NW., suite 700, Washington, DC. FOR FURTHER INFORMATION CONTACT: Tim Backman, Aerospace Engineer, Standardization Branch, ANM-113, FAA, Transport Airplane Directorate, 1601 Lind Avenue, SW., Renton, Washington 98055-4056; telephone (206) 227-2797; fax (206) 227-1149. SUPPLEMENTARY INFORMATION: A proposal to amend part 39 of the Federal Aviation Regulations (14 CFR part 39) by superseding AD 93-17-04, amendment 39-8674 (58 FR 47036, September 7, 1993), and AD 95-04-06, amendment 39-9158 (60 FR 12413, March 7, 1995), which are applicable to British Aerospace Model BAe 146 and Avro 146-RJ series airplanes, was published in the Federal Register on October 18, 1996 (61 FR 54366). The action proposed to supersede AD 93-17-04 and AD 95-04-06 to continue to require either eddy current or ultra high sensitivity penetrant inspections to detect cracking of the upper main fitting of the nose landing gear (NLG), and replacement or repair of cracked parts, if necessary. It also proposed to require that inspections of certain airplanes equipped with specific NLG's be conducted at reduced intervals. Interested persons have been afforded an opportunity to participate in the making of this amendment. No comments were submitted in response to the proposal or the FAA's determination of the cost to the public. Conclusion The FAA has determined that air safety and the public interest require the adoption of the rule as proposed. Cost Impact There are approximately 52 Model BAe 146 and Model Avro 146-RJ series airplanes of U.S. registry that will be affected by this proposed AD. The inspections that are currently required by AD 93-17-04 and AD 95-04-06, and retained in this proposal, take approximately 3 work hours per airplane to accomplish, at an average labor rate of $60 per work hour. Based on these figures, the cost impact of the previously required actions on U.S. operators is estimated to be $9,360, or $180 per airplane, per inspection cycle. Although this amendment adds no new actions, the associated costs for some operators will increase somewhat since certain inspections will be required to be performed more frequently. The cost impact figures discussed above are based on assumptions that no operator has yet accomplished any of the requirements of this AD action, and that no operator would accomplish those actions in the future if this AD were not adopted. Regulatory Impact The regulations adopted herein will not have substantial direct effects on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government. Therefore, in accordance with Executive Order 12612, it is determined that this final rule does not have sufficient federalism implications to warrant the preparation of a Federalism Assessment. For the reasons discussed above, I certify that this action (1) is not a "significant regulatory action" under Executive Order 12866; (2) is not a "significant rule" under DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979); and (3) will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act. A final evaluation has been prepared for this action and it is contained in the Rules Docket. A copy of it may be obtained from the Rules Docket at the location provided under the caption "ADDRESSES." List of Subjects in 14 CFR Part 39 Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety. Adoption of the Amendment Accordingly, pursuant to the authority delegated to me by the Administrator, the Federal Aviation Administration amends part 39 of the Federal Aviation Regulations (14 CFR part 39) as follows: PART 39 - AIRWORTHINESS DIRECTIVES 1. The authority citation for part 39 continues to read as follows: Authority: 49 U.S.C. 106(g), 40113, 44701. § 39.13 - [Amended] 2. Section 39.13 is amended by removing amendment 39-8674 (58 FR 47036, September 7, 1993) and amendment 39-9158 (60 FR 12413, March 7, 1995), by adding a new airworthiness directive (AD), amendment 39-9969, to read as follows: REGULATORY TEXT: 97-06-12 BRITISH AEROSPACE REGIONAL AIRCRAFT LIMITED, AVRO INTERNATIONAL: Amendment 39-9969. Docket 96-NM-26-AD. Supersedes AD 93-17-04, amendment 39-8674; and AD 95-04-06, amendment 39-9158. Applicability: Model BAe 146 and Avro 146-RJ series airplanes, certificated in any category. NOTE 1: This AD applies to each airplane identified in the preceding applicability provision, regardless of whether it has been modified, altered, or repaired in the area subject to the requirements of this AD. For airplanes that have been modified, altered, or repaired so that the performance of the requirements of this AD is affected, the owner/operator must request approval for an alternative method of compliance in accordance with paragraph (f) of this AD. The request should include an assessment of the effect of the modification, alteration, or repair on the unsafe condition addressed by this AD; and, if the unsafe condition has not been eliminated, the request should include specific proposed actions to address it. Compliance: Required as indicated, unless accomplished previously. To prevent failure of the main fitting, which could lead to collapse of the nose landing gear (NLG) during landing, accomplish the following: Restatement of Continuing Requirements (a) For Model BAe 146 series airplanes on which NLG part number 200876002, 200876004, or 201138002 has been installed: (1) Prior to the accumulation of 16,000 total landings or within 30 days after October 7, 1993 (the effective date of AD 93-17-04, Amendment 39-8674), whichever occurs later, conduct an eddy current or ultra sensitivity penetrant inspection of the NLG, in accordance with British Aerospace Service Bulletin S.B. 32-131, dated December 6, 1991; Revision 1, dated November 12, 1992; Revision 2, dated July 10, 1993; or Revision 3, dated October 18, 1995. Repeat the inspection thereafter at intervals not to exceed 8,000 landings. (2) If cracking is detected during any inspection required by this paragraph, prior to further flight, replace the currently installed NLG with a new or serviceable unit, or repair the crack, in accordance with a method approved by the Manager, Standardization Branch, ANM-113, FAA, Transport Airplane Directorate. After replacement or repair, repeat the inspection at intervals not to exceed 8,000 landings. (b) For Model Avro 146-RJ series airplanes on which NLG part number 200876002, 200876004, or 201138002 has been installed: (1) Prior to the accumulation of 16,000 total landings or within 30 days after April 6, 1995 (the effective date of AD 95-04-06, Amendment 39-9158), whichever occurs later, conduct an eddy current or ultra sensitivity penetrant inspection of the NLG, in accordance with British Aerospace Service Bulletin S.B. 32-131, dated December 6, 1991; Revision 1, dated November 12, 1992; Revision 2, dated July 10, 1993; or Revision 3, dated October 18, 1995. Repeat the inspection thereafter at intervals not to exceed 8,000 landings. (2) If cracking is detected during any inspection required by this paragraph, prior to further flight, replace the currently installed NLG with a new or serviceable unit, or repair the crack, in accordance with a method approved by the Manager, Standardization Branch, ANM-113, FAA, Transport Airplane Directorate. After replacement or repair, repeat the inspection at intervals not to exceed 8,000 landings. (c) For Model BAe 146 series airplanes on which NLG part number 200876001 or 200876003 has been installed: (1) Prior to the accumulation of 4,000 total landings or within 30 days after October 7, 1993 (the effective date of AD 93-17-04, Amendment 39-8674), whichever occurs later, conduct an eddy current or ultra high sensitivity penetrant inspection of the NLG, in accordance with British Aerospace Service Bulletin S.B. 32-131, dated December 6, 1991; Revision 1, dated November 12, 1992; Revision 2, dated July 10, 1993; or Revision 3, dated October 18, 1995. Repeat the inspection thereafter at intervals not to exceed 4,000 landings until the inspection required by paragraph (e) of this AD is accomplished. (2) If cracking is detected during any inspection required by this paragraph, prior to further flight, replace the currently installed NLG with a new or serviceable unit, or repair the crack, in accordance with a method approved by the Manager, Standardization Branch, ANM-113, FAA, Transport Airplane Directorate. After replacement or repair, repeat the inspection at intervals not to exceed 4,000 landings until the inspection required by paragraph (e) of this AD is accomplished. (d) For Model Avro 146-RJ series airplanes on which NLG part number 200876001 or 200876003 has been installed: (1) Prior to the accumulation of 4,000 total landings or within 30 days after April 6, 1995 (the effective date of AD 95-04-06, Amendment 39-9158), whichever occurs later, conduct an eddy current or ultra high sensitivity penetrant inspection of the NLG, in accordance with British Aerospace Service Bulletin S.B. 32-131, dated December 6, 1991; Revision 1, dated November 12, 1992; Revision 2, dated July 10, 1993; or Revision 3, dated October 18, 1995. Repeat the inspection thereafter at intervals not to exceed 4,000 landings until the inspection required by paragraph (e) of this AD is accomplished. (2) If cracking is detected during any inspection required by this paragraph, prior to further flight, replace the currently installed NLG with a new or serviceable unit, or repair the crack, in accordance with a method approved by the Manager, Standardization Branch, ANM-113, FAA, Transport Airplane Directorate. After replacement or repair, repeat the inspection at intervals not to exceed 4,000 landings until the inspection required by paragraph (e) of this AD is accomplished. New Requirements (e) For Model BAe 146 and Avro 146-RJ series airplanes on which NLG part number 200876001 or 200876003 has been installed: Within 2,000 landings from the immediately preceding inspection conducted in accordance with paragraph (c) or (d) of this AD, or within 3 months after the effective date of this AD, whichever occurs later, accomplish the following: (1) Conduct an eddy current or ultra high sensitivity penetrant inspection of the NLG, in accordance with British Aerospace Service Bulletin S.B. 32-131, Revision 3, dated October 18, 1995. Repeat the inspection thereafter at intervals not to exceed 2,000 landings. Accomplishment of this inspection terminates the requirements of paragraph (c) and (d) of this AD. NOTE 2: The British Aerospace service bulletin references a Messier-Dowty Service Bulletin 145-32-109, Revision 2, dated August 2, 1995, as an additional source of service information. (2) If cracking is detected during any inspection required by this paragraph, prior to further flight, replace the currently installed NLG with a new or serviceable unit, or repair the crack, in accordance with a method approved by the Manager, Standardization Branch, ANM-113. After replacement or repair, repeat the inspection at intervals not to exceed 2,000 landings. (f) An alternative method of compliance or adjustment of the compliance time that provides an acceptable level of safety may be used if approved by the Manager, Standardization Branch, ANM-113, FAA, Transport Airplane Directorate. Operators shall submit their requests through an appropriate FAA Principal Maintenance Inspector, who may add comments and then send it to the Manager, Standardization Branch, ANM-113. NOTE 3: Information concerning the existence of approved alternative methods of compliance with this AD, if any, may be obtained from the Standardization Branch, ANM-113. (g) Special flight permits may be issued in accordance with sections 21.197 and 21.199 of the Federal Aviation Regulations (14 CFR 21.197 and 21.199) to operate the airplane to a location where the requirements of this AD can be accomplished. (h) The inspections shall be done in accordance with the following British Aerospace service bulletins: Service Bulletin Number Revision Level Date S.B. 32-131 (original) December 6, 1991 S.B. 32-131 Revision 1 November 12, 1992 S.B. 32-131 Revision 2 July 10, 1993 S.B. 32-131 Revision 3 October 18, 1995 The incorporation by reference (IBR) of certain of these service bulletins was approved previously by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51, as follows: Service Bulletin Number/Revision IBR Approval Date Federal Register Citation S.B. 32-131, (original) January 12, 1993 (57 FR 57883, December 8, 1992) S.B. 32-131, Revision 1 October 7, 1993 (58 FR 47036, September 7, 1993) S.B. 32-131, Revision 2 April 6, 1995 (60 FR 12413, March 7, 1995) The incorporation by reference of British Aerospace Service Bulletin S.B. 32-131, Revision 3, dated October 18, 1995, is approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies of any of these service bulletins may be obtained from British Aerospace Holding, Inc., Avro International Aerospace Division, P.O. Box 16039, Dulles International Airport, Washington DC 20041-6039. Copies may be inspected at the FAA, Transport Airplane Directorate, 1601 Lind Avenue, SW., Renton, Washington; or at the Office of the Federal Register, 800 North Capitol Street, NW., suite 700, Washington, DC. (i) This amendment becomes effective on April 21, 1997. FOOTER:
Document Text
Show stored source text (verify against official source)
AD Final Rules - DRS_97-06-12.html Copy URL Print/Save as PDF Document Versions Feedback Details AD Number: 97-06-12 Document Type: AD Final Rules Docket Number: 96-NM-26-AD Subject Heading: Airworthiness Directives; British Aerospace Models BAe 146 and Avro 146-RJ Series Airplanes Subject: Nose Landing Gear Main Fitting Status: Current Citation: Federal Register: March 18, 1997 (Volume 62, Number 52) Citation Publish Date: 03/18/1997 Effective Date: 04/21/1997 Make: BAE Systems (Operations) Limited Model: Avro 146-RJ100A | Avro 146-RJ70A | Avro 146-RJ85A | BAe 146-100A | BAe 146-200A | BAe 146-300A Product Type: Aircraft Product Subtype: Large Airplane Affected AD: Superseded AD: Affected By: Superseded By: Service/Office: Office of Primary Responsibility: CFR Part Reference: Part 39 [62 FR 12740 NO. 52 03/18/97] Comments: AIRWORTHINESS DIRECTIVES FINAL RULES: 97-06-12 CITATION: [Federal Register: March 18, 1997 (Volume 62, Number 52)] PAGE NUMBER: [Page 12740] DOCKET NUMBER: 96-NM-26-AD AMENDMENT: 39-9969 AD NUMBER: 97-06-12 SUBJECT HEADING: Airworthiness Directives; British Aerospace Models BAe 146 and Avro 146-RJ Series Airplanes ACTION: Final rule SUMMARY: This amendment supersedes two existing airworthiness directives (AD), applicable to British Aerospace Model BAe 146 and Avro 146-RJ series airplanes, that currently require inspections to detect cracking of the upper main fitting of the nose landing gear (NLG), and replacement or repair of cracked parts, if necessary. Those actions were prompted by reports of cracking in the main fittings of the NLG. This amendment requires that, for certain airplanes, the inspections be accomplished at reduced intervals. This amendment is prompted by the results of new analyses of the cracking that were conducted by the manufacturer of the NLG. The actions specified by this AD are intended to prevent failure of the main fitting, which could lead to collapse of the NLG during landing. DATES: Effective April 21, 1997. The incorporation by reference of British Aerospace Service Bulletin S.B. 32-131, Revision 3, dated 10/18/95, as listed in the regulations, is approved by the Director of the Federal Register as of April 21, 1997. The incorporation by reference of British Aerospace Service Bulletin S.B. 32-131, Revision 2, dated 7/10/93, as listed in the regulations, was approved previously by the Director of the Federal Register as of April 6, 1995 (60 FR 12413, 3/7/95). The incorporation by reference of British Aerospace Service Bulletin S.B. 32-131, Revision 1, dated 11/12/92, as listed in the regulations, was approved previously by the Director of the Federal Register as of 10/7/93 (58 FR 47036, 9/7/93). The incorporation by reference of British Aerospace Service Bulletin S.B. 32-131, dated 12/6/91, as listed in the regulations, was approved previously by the Director of the Federal Register as of 1/12/93 (57 FR 57883, 12/8/92). ADDRESSES: The service information referenced in this AD may be obtained from British Aerospace Holding, Inc., Avro International Aerospace Division, P.O. Box 16039, Dulles International Airport, Washington DC 20041-6039. This information may be examined at the Federal Aviation Administration (FAA), Transport Airplane Directorate, Rules Docket, 1601 Lind Avenue, SW., Renton, Washington; or at the Office of the Federal Register, 800 North Capitol Street, NW., suite 700, Washington, DC. FOR FURTHER INFORMATION CONTACT: Tim Backman, Aerospace Engineer, Standardization Branch, ANM-113, FAA, Transport Airplane Directorate, 1601 Lind Avenue, SW., Renton, Washington 98055-4056; telephone (206) 227-2797; fax (206) 227-1149. SUPPLEMENTARY INFORMATION: A proposal to amend part 39 of the Federal Aviation Regulations (14 CFR part 39) by superseding AD 93-17-04, amendment 39-8674 (58 FR 47036, September 7, 1993), and AD 95-04-06, amendment 39-9158 (60 FR 12413, March 7, 1995), which are applicable to British Aerospace Model BAe 146 and Avro 146-RJ series airplanes, was published in the Federal Register on October 18, 1996 (61 FR 54366). The action proposed to supersede AD 93-17-04 and AD 95-04-06 to continue to require either eddy current or ultra high sensitivity penetrant inspections to detect cracking of the upper main fitting of the nose landing gear (NLG), and replacement or repair of cracked parts, if necessary. It also proposed to require that inspections of certain airplanes equipped with specific NLG's be conducted at reduced intervals. Interested persons have been afforded an opportunity to participate in the making of this amendment. No comments were submitted in response to the proposal or the FAA's determination of the cost to the public. Conclusion The FAA has determined that air safety and the public interest require the adoption of the rule as proposed. Cost Impact There are approximately 52 Model BAe 146 and Model Avro 146-RJ series airplanes of U.S. registry that will be affected by this proposed AD. The inspections that are currently required by AD 93-17-04 and AD 95-04-06, and retained in this proposal, take approximately 3 work hours per airplane to accomplish, at an average labor rate of $60 per work hour. Based on these figures, the cost impact of the previously required actions on U.S. operators is estimated to be $9,360, or $180 per airplane, per inspection cycle. Although this amendment adds no new actions, the associated costs for some operators will increase somewhat since certain inspections will be required to be performed more frequently. The cost impact figures discussed above are based on assumptions that no operator has yet accomplished any of the requirements of this AD action, and that no operator would accomplish those actions in the future if this AD were not adopted. Regulatory Impact The regulations adopted herein will not have substantial direct effects on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government. Therefore, in accordance with Executive Order 12612, it is determined that this final rule does not have sufficient federalism implications to warrant the preparation of a Federalism Assessment. For the reasons discussed above, I certify that this action (1) is not a "significant regulatory action" under Executive Order 12866; (2) is not a "significant rule" under DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979); and (3) will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act. A final evaluation has been prepared for this action and it is contained in the Rules Docket. A copy of it may be obtained from the Rules Docket at the location provided under the caption "ADDRESSES." List of Subjects in 14 CFR Part 39 Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety. Adoption of the Amendment Accordingly, pursuant to the authority delegated to me by the Administrator, the Federal Aviation Administration amends part 39 of the Federal Aviation Regulations (14 CFR part 39) as follows: PART 39 - AIRWORTHINESS DIRECTIVES 1. The authority citation for part 39 continues to read as follows: Authority: 49 U.S.C. 106(g), 40113, 44701. § 39.13 - [Amended] 2. Section 39.13 is amended by removing amendment 39-8674 (58 FR 47036, September 7, 1993) and amendment 39-9158 (60 FR 12413, March 7, 1995), by adding a new airworthiness directive (AD), amendment 39-9969, to read as follows: REGULATORY TEXT: 97-06-12 BRITISH AEROSPACE REGIONAL AIRCRAFT LIMITED, AVRO INTERNATIONAL: Amendment 39-9969. Docket 96-NM-26-AD. Supersedes AD 93-17-04, amendment 39-8674; and AD 95-04-06, amendment 39-9158. Applicability: Model BAe 146 and Avro 146-RJ series airplanes, certificated in any category. NOTE 1: This AD applies to each airplane identified in the preceding applicability provision, regardless of whether it has been modified, altered, or repaired in the area subject to the requirements of this AD. For airplanes that have been modified, altered, or repaired so that the performance of the requirements of this AD is affected, the owner/operator must request approval for an alternative method of compliance in accordance with paragraph (f) of this AD. The request should include an assessment of the effect of the modification, alteration, or repair on the unsafe condition addressed by this AD; and, if the unsafe condition has not been eliminated, the request should include specific proposed actions to address it. Compliance: Required as indicated, unless accomplished previously. To prevent failure of the main fitting, which could lead to collapse of the nose landing gear (NLG) during landing, accomplish the following: Restatement of Continuing Requirements (a) For Model BAe 146 series airplanes on which NLG part number 200876002, 200876004, or 201138002 has been installed: (1) Prior to the accumulation of 16,000 total landings or within 30 days after October 7, 1993 (the effective date of AD 93-17-04, Amendment 39-8674), whichever occurs later, conduct an eddy current or ultra sensitivity penetrant inspection of the NLG, in accordance with British Aerospace Service Bulletin S.B. 32-131, dated December 6, 1991; Revision 1, dated November 12, 1992; Revision 2, dated July 10, 1993; or Revision 3, dated October 18, 1995. Repeat the inspection thereafter at intervals not to exceed 8,000 landings. (2) If cracking is detected during any inspection required by this paragraph, prior to further flight, replace the currently installed NLG with a new or serviceable unit, or repair the crack, in accordance with a method approved by the Manager, Standardization Branch, ANM-113, FAA, Transport Airplane Directorate. After replacement or repair, repeat the inspection at intervals not to exceed 8,000 landings. (b) For Model Avro 146-RJ series airplanes on which NLG part number 200876002, 200876004, or 201138002 has been installed: (1) Prior to the accumulation of 16,000 total landings or within 30 days after April 6, 1995 (the effective date of AD 95-04-06, Amendment 39-9158), whichever occurs later, conduct an eddy current or ultra sensitivity penetrant inspection of the NLG, in accordance with British Aerospace Service Bulletin S.B. 32-131, dated December 6, 1991; Revision 1, dated November 12, 1992; Revision 2, dated July 10, 1993; or Revision 3, dated October 18, 1995. Repeat the inspection thereafter at intervals not to exceed 8,000 landings. (2) If cracking is detected during any inspection required by this paragraph, prior to further flight, replace the currently installed NLG with a new or serviceable unit, or repair the crack, in accordance with a method approved by the Manager, Standardization Branch, ANM-113, FAA, Transport Airplane Directorate. After replacement or repair, repeat the inspection at intervals not to exceed 8,000 landings. (c) For Model BAe 146 series airplanes on which NLG part number 200876001 or 200876003 has been installed: (1) Prior to the accumulation of 4,000 total landings or within 30 days after October 7, 1993 (the effective date of AD 93-17-04, Amendment 39-8674), whichever occurs later, conduct an eddy current or ultra high sensitivity penetrant inspection of the NLG, in accordance with British Aerospace Service Bulletin S.B. 32-131, dated December 6, 1991; Revision 1, dated November 12, 1992; Revision 2, dated July 10, 1993; or Revision 3, dated October 18, 1995. Repeat the inspection thereafter at intervals not to exceed 4,000 landings until the inspection required by paragraph (e) of this AD is accomplished. (2) If cracking is detected during any inspection required by this paragraph, prior to further flight, replace the currently installed NLG with a new or serviceable unit, or repair the crack, in accordance with a method approved by the Manager, Standardization Branch, ANM-113, FAA, Transport Airplane Directorate. After replacement or repair, repeat the inspection at intervals not to exceed 4,000 landings until the inspection required by paragraph (e) of this AD is accomplished. (d) For Model Avro 146-RJ series airplanes on which NLG part number 200876001 or 200876003 has been installed: (1) Prior to the accumulation of 4,000 total landings or within 30 days after April 6, 1995 (the effective date of AD 95-04-06, Amendment 39-9158), whichever occurs later, conduct an eddy current or ultra high sensitivity penetrant inspection of the NLG, in accordance with British Aerospace Service Bulletin S.B. 32-131, dated December 6, 1991; Revision 1, dated November 12, 1992; Revision 2, dated July 10, 1993; or Revision 3, dated October 18, 1995. Repeat the inspection thereafter at intervals not to exceed 4,000 landings until the inspection required by paragraph (e) of this AD is accomplished. (2) If cracking is detected during any inspection required by this paragraph, prior to further flight, replace the currently installed NLG with a new or serviceable unit, or repair the crack, in accordance with a method approved by the Manager, Standardization Branch, ANM-113, FAA, Transport Airplane Directorate. After replacement or repair, repeat the inspection at intervals not to exceed 4,000 landings until the inspection required by paragraph (e) of this AD is accomplished. New Requirements (e) For Model BAe 146 and Avro 146-RJ series airplanes on which NLG part number 200876001 or 200876003 has been installed: Within 2,000 landings from the immediately preceding inspection conducted in accordance with paragraph (c) or (d) of this AD, or within 3 months after the effective date of this AD, whichever occurs later, accomplish the following: (1) Conduct an eddy current or ultra high sensitivity penetrant inspection of the NLG, in accordance with British Aerospace Service Bulletin S.B. 32-131, Revision 3, dated October 18, 1995. Repeat the inspection thereafter at intervals not to exceed 2,000 landings. Accomplishment of this inspection terminates the requirements of paragraph (c) and (d) of this AD. NOTE 2: The British Aerospace service bulletin references a Messier-Dowty Service Bulletin 145-32-109, Revision 2, dated August 2, 1995, as an additional source of service information. (2) If cracking is detected during any inspection required by this paragraph, prior to further flight, replace the currently installed NLG with a new or serviceable unit, or repair the crack, in accordance with a method approved by the Manager, Standardization Branch, ANM-113. After replacement or repair, repeat the inspection at intervals not to exceed 2,000 landings. (f) An alternative method of compliance or adjustment of the compliance time that provides an acceptable level of safety may be used if approved by the Manager, Standardization Branch, ANM-113, FAA, Transport Airplane Directorate. Operators shall submit their requests through an appropriate FAA Principal Maintenance Inspector, who may add comments and then send it to the Manager, Standardization Branch, ANM-113. NOTE 3: Information concerning the existence of approved alternative methods of compliance with this AD, if any, may be obtained from the Standardization Branch, ANM-113. (g) Special flight permits may be issued in accordance with sections 21.197 and 21.199 of the Federal Aviation Regulations (14 CFR 21.197 and 21.199) to operate the airplane to a location where the requirements of this AD can be accomplished. (h) The inspections shall be done in accordance with the following British Aerospace service bulletins: Service Bulletin Number Revision Level Date S.B. 32-131 (original) December 6, 1991 S.B. 32-131 Revision 1 November 12, 1992 S.B. 32-131 Revision 2 July 10, 1993 S.B. 32-131 Revision 3 October 18, 1995 The incorporation by reference (IBR) of certain of these service bulletins was approved previously by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51, as follows: Service Bulletin Number/Revision IBR Approval Date Federal Register Citation S.B. 32-131, (original) January 12, 1993 (57 FR 57883, December 8, 1992) S.B. 32-131, Revision 1 October 7, 1993 (58 FR 47036, September 7, 1993) S.B. 32-131, Revision 2 April 6, 1995 (60 FR 12413, March 7, 1995) The incorporation by reference of British Aerospace Service Bulletin S.B. 32-131, Revision 3, dated October 18, 1995, is approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies of any of these service bulletins may be obtained from British Aerospace Holding, Inc., Avro International Aerospace Division, P.O. Box 16039, Dulles International Airport, Washington DC 20041-6039. Copies may be inspected at the FAA, Transport Airplane Directorate, 1601 Lind Avenue, SW., Renton, Washington; or at the Office of the Federal Register, 800 North Capitol Street, NW., suite 700, Washington, DC. (i) This amendment becomes effective on April 21, 1997. FOOTER:
Source: Official FAA Source ↗
Retrieved: Apr 8, 2026
Rights: U.S. Government Public Domain
This site is not affiliated with or endorsed by the FAA. Always verify with official sources.
Related Airworthiness Directives
2010-09-11R1
final ruleAirworthiness Directives; BAE SYSTEMS (Operations) Limited Airplanes
Unsafe Condition: Wings
2024-17-06
final ruleAirworthiness Directives; BAE Systems (Operations) Limited Airplanes
Unsafe Condition: Cracking on the radius of the rib 0 forward longeron at frame 26, which could lead to failure of adjacent structure, fuselage skin failure, and potential rapid decompression or loss of the airplane.
2024-06-10 Recurring
final ruleAirworthiness Directives; BAE Systems (Operations) Limited Airplanes
Unsafe Condition: cracking on the shoulders of an MLG side stay outer link, which could lead to failure of the MLG side stay outer link and MLG collapse, resulting in a runway departure and the engine or wing contac...
2023-10-02
final ruleAirworthiness Directives; Transport and Commuter Category Airplanes
Unsafe Condition: Radio altimeter anomalies that are undetected by the automation or pilot, particularly close to the ground (e.g., landing flare), could lead to loss of continued safe flight and landing. Additional...