AD 96-23-18
Applicability
| Type | Manufacturer | Model | Details |
|---|---|---|---|
| aircraft | Nomad TC Pty Ltd | N22B | Airworthiness Directives; Aerospace Technologies of Australia Pty Ltd. (formerly Government Aircraft Factory) Models N22B, N24A, and N22S Airplanes |
| aircraft | Nomad TC Pty Ltd | N22S | Airworthiness Directives; Aerospace Technologies of Australia Pty Ltd. (formerly Government Aircraft Factory) Models N22B, N24A, and N22S Airplanes |
| aircraft | Nomad TC Pty Ltd | N24A | Airworthiness Directives; Aerospace Technologies of Australia Pty Ltd. (formerly Government Aircraft Factory) Models N22B, N24A, and N22S Airplanes |
Unsafe Condition
Cracks along the forward flange of the fuselage stub fin plate in the area of Rib Water Line (WL) 138.87 could cause structural failure of the fuselage area and result in loss of control of the airplane.
AI-generated summary from the source AD text. Verify against the official source before acting.
Required Actions
Replace the fuselage stub fin plate with part number 1E/N-12-57 (MOD N759) in accordance with Nomad Service Bulletin ANMD-53-13, Revision 3. Special flight permits may be issued under 14 CFR 21.197 and 21.199 to operate the airplane to a location where the AD requirements can be accomplished.
AI-generated summary from the source AD text. Verify against the official source before acting.
Compliance Time
within the next 100 hours time-in-service after the effective date of this AD
AI-generated summary from the source AD text. Verify against the official source before acting.
Affected Aircraft
Aerospace Technologies of Australia Pty Ltd. Models N22B, N24A, and N22S airplanes (all serial numbers) not equipped with part number 1E/N-12-57 fuselage stub fin plate (MOD N759)
AI-generated summary from the source AD text. Verify against the official source before acting.
Source: Official FAA Source ↗
Retrieved: Apr 8, 2026
Rights: U.S. Government Public Domain
This site is not affiliated with or endorsed by the FAA. Always verify with official sources.