AD 96-12-09

final rule
Data completeness: 70%

Airworthiness Directives; PTC Seating Products Division, B/E Aerospace, Model 950 Series Passenger Seats Equipped With Footrest Assembly

AD Number
96-12-09
Status
final_rule
Effective Date
Product Category
appliance
Docket
95-ANE-25
FR Citation
Federal Register: June 24, 1996 (Volume 61, Number 122)

Applicability

TypeManufacturerModelDetails
aircraft PTC Seating Products Passenger Seat with Footrest Assembly Airworthiness Directives; PTC Seating Products Division, B/E Aerospace, Model 950 Series Passenger Seats Equipped With Footrest Assembly

Unsafe Condition

The footrest assembly arms on PTC Model 950 series passenger seats can cause finger injuries during extension or retraction due to potential hand injury during operation.

AI-generated summary from the source AD text. Verify against the official source before acting.

Required Actions

Remove footrest assembly arms (P/N 98440-1 or -2) and install conversion kit (P/N 122966-1) following specified service bulletins.

AI-generated summary from the source AD text. Verify against the official source before acting.

Compliance Time

Within nine calendar months after the effective date of this AD (July 29, 1996).

AI-generated summary from the source AD text. Verify against the official source before acting.

Affected Aircraft

PTC Seating Products Division, B/E Aerospace Model 950 series passenger seats equipped with footrest assembly, all serial numbers.

AI-generated summary from the source AD text. Verify against the official source before acting.

Source: Official FAA Source ↗

Retrieved: Apr 8, 2026

Rights: U.S. Government Public Domain

This site is not affiliated with or endorsed by the FAA. Always verify with official sources.