AD 96-08-04

final rule
Data completeness: 70%

Airworthiness Directives; Eurocopter Deutschland GmbH (ECD) Model BO-105, BO-105A, BO-105C, BO-105S, and BO-105LS A-1 Helicopters

AD Number
96-08-04
Status
final_rule
Effective Date
Product Category
aircraft
Docket
95-SW-14-AD
FR Citation
Federal Register: April 17, 1996 (Volume 61, Number 75)

Applicability

TypeManufacturerModelDetails
aircraft Airbus Helicopters Deutschland GmbH BO-105A Airworthiness Directives; Eurocopter Deutschland GmbH (ECD) Model BO-105, BO-105A, BO-105C, BO-105S, and BO-105LS A-1 Helicopters
aircraft Airbus Helicopters Deutschland GmbH BO-105C Airworthiness Directives; Eurocopter Deutschland GmbH (ECD) Model BO-105, BO-105A, BO-105C, BO-105S, and BO-105LS A-1 Helicopters
aircraft Airbus Helicopters Deutschland GmbH BO-105LS A-1 Airworthiness Directives; Eurocopter Deutschland GmbH (ECD) Model BO-105, BO-105A, BO-105C, BO-105S, and BO-105LS A-1 Helicopters
aircraft Airbus Helicopters Deutschland GmbH BO-105S Airworthiness Directives; Eurocopter Deutschland GmbH (ECD) Model BO-105, BO-105A, BO-105C, BO-105S, and BO-105LS A-1 Helicopters

Unsafe Condition

Component wear in the tandem hydraulic switch-over system could result in a sudden drop in the collective and a sudden loss of altitude.

AI-generated summary from the source AD text. Verify against the official source before acting.

Required Actions

Conduct a ground test of the tandem hydraulic system and inspect the switch-over system linkage for wear. If switch-over reactions occur, perform additional inspections and required maintenance procedures as specified in the service bulletin.

AI-generated summary from the source AD text. Verify against the official source before acting.

Compliance Time

Within 50 hours time-in-service after the effective date of this AD, and thereafter at intervals not to exceed 1 year.

AI-generated summary from the source AD text. Verify against the official source before acting.

Affected Aircraft

Eurocopter Deutschland GmbH (ECD) Model BO-105, BO-105A, BO-105C, BO-105S, and BO-105LS A-1 helicopters with tandem hydraulic unit part numbers 105-45021, 105-45023, or 105-45028, and valve body manifolds D133-756, D133-756E, ZE1-126-I, ZE2-126, or ZE2-126-1 installed on either Hydraulic System 1 or 2.

AI-generated summary from the source AD text. Verify against the official source before acting.

Source: Official FAA Source ↗

Retrieved: Apr 8, 2026

Rights: U.S. Government Public Domain

This site is not affiliated with or endorsed by the FAA. Always verify with official sources.