AD 90-15-17
Applicability
| Type | Manufacturer | Model | Details |
|---|---|---|---|
| aircraft | The Boeing Company | 737-100 Series | Airworthiness Directives; BOEING Model 737 Series Airplanes |
| aircraft | The Boeing Company | 737-200 Series | Airworthiness Directives; BOEING Model 737 Series Airplanes |
| aircraft | The Boeing Company | 737-200C Series | Airworthiness Directives; BOEING Model 737 Series Airplanes |
| aircraft | The Boeing Company | 737-300 Series | Airworthiness Directives; BOEING Model 737 Series Airplanes |
| aircraft | The Boeing Company | 737-400 Series | Airworthiness Directives; BOEING Model 737 Series Airplanes |
| aircraft | The Boeing Company | 737-500 Series | Airworthiness Directives; BOEING Model 737 Series Airplanes |
| aircraft | The Boeing Company | 737-600 Series | Airworthiness Directives; BOEING Model 737 Series Airplanes |
| aircraft | The Boeing Company | 737-700 Series | Airworthiness Directives; BOEING Model 737 Series Airplanes |
| aircraft | The Boeing Company | 737-800 Series | Airworthiness Directives; BOEING Model 737 Series Airplanes |
Unsafe Condition
Engine fuel starvation resulting from main wing tank suction feed system stress fractures or fuel boost pump bypass valve freezing.
AI-generated summary from the source AD text. Verify against the official source before acting.
Required Actions
Perform an operational test of the bypass valves within specified intervals, install fuel system modifications, and conduct inspections or modifications of the suction feed bypass system as detailed in specified service bulletins.
AI-generated summary from the source AD text. Verify against the official source before acting.
Compliance Time
Prior to the accumulation of 150 flight hours after January 27, 1988, and thereafter at intervals not to exceed 300 flight hours. For modified airplanes, within one year after August 27, 1990, conduct an inspection. For others, within one year after August 27, 1990, modify the fuel boost pump bypass valves system.
AI-generated summary from the source AD text. Verify against the official source before acting.
Affected Aircraft
Boeing Model 737 series airplanes listed in Boeing Alert Service Bulletin 737-28A1072 dated August 27, 1987, certificated in any category.
AI-generated summary from the source AD text. Verify against the official source before acting.
Federal Register Abstract
Bypass Valves
Applicability Source Text
Show captured applicability text from the source AD
AD Final Rules - DRS_90-15-17.html Copy URL Print/Save as PDF Document Versions Feedback Details AD Number: 90-15-17 Document Type: AD Final Rules Docket Number: 89-NM-210-AD Subject Heading: Airworthiness Directives; BOEING Model 737 Series Airplanes Subject: Bypass Valves Status: Current Citation: This information is not available. Citation Publish Date: Effective Date: 08/27/1990 Make: The Boeing Company Model: 737-100 Series | 737-200 Series | 737-200C Series | 737-300 Series | 737-400 Series | 737-500 Series...Show more Product Type: Aircraft Product Subtype: Large Airplane Affected AD: Superseded AD: Affected By: Superseded By: Service/Office: Office of Primary Responsibility: CFR Part Reference: Part 39 Comments: AIRWORTHINESS DIRECTIVES FINAL RULES: 90-15-17 CITATION: This information is not available. PAGE NUMBER: DOCKET NUMBER: 89-NM-210-AD AMENDMENT: 39-6673 AD NUMBER: 90-15-17 SUBJECT HEADING: Airworthiness Directives; BOEING Model 737 Series Airplanes ACTION: SUMMARY: DATES: Effective August 27, 1990. ADDRESSES: FOR FURTHER INFORMATION CONTACT: SUPPLEMENTARY INFORMATION: REGULATORY TEXT: 90-15-17 BOEING: Amendment 39-6673. Docket No. 89-NM-210-AD. Applicability: Model 737 series airplanes, as listed in Boeing Alert Service Bulletin 737- 28A1072, dated August 27, 1987, certificated in any category. Compliance: Required as indicated, unless previously accomplished. To prevent engine fuel starvation resulting from main wing tank suction feed system stress fractures or fuel boost pump bypass valve freezing, accomplish the following: A. Prior to the accumulation of 150 flight hours after January 27, 1988 (the effective date of Amendment 39-5823, AD 88-01-06), and thereafter at intervals not to exceed 300 flight hours, perform an operational test of the bypass valves in accordance with Boeing Alert Service Bulletin 737-28A1072, dated August 27, 1987. B. The operational tests required by paragraph A., above, may be terminated when the fuel system modifications, detailed in Boeing Service Bulletin 737-28A1072, Revision 2, dated February 18, 1988, or Revision 3, dated October 6, 1988, are installed. C. For airplanes modified in accordance with paragraph B., above: Within one year after the effective date of this amendment, conduct an inspection of the suction feed bypass system for preloading in accordance with Boeing Alert Service Bulletin 737-28A1072, Revision 4, dated August 7, 1989. If preloading is discovered in the suction feed bypass system, prior to further flight, modify in accordance with that service bulletin. D. For all other airplanes: Within one year after the effective date of this amendment, modify the fuel boost pump bypass valves system in accordance with Boeing Alert Service Bulletin 737-28A1072, Revision 4, dated August 7, 1989. This modification constitutes terminating action for the repetitive operational tests required by paragraph A., above. E. An alternate means of compliance or adjustment of the compliance time, which provides an acceptable level of safety, may be used when approved by the Manager, Seattle Aircraft Certification Office (ACO), FAA, Transport Airplane Directorate. NOTE: The request should be submitted directly to the Manager, Seattle ACO, and a copy sent to the cognizant FAA Principal Inspector (PI). The PI will then forward comments or concurrence to the Seattle ACO. F. Special flight permits may be issued in accordance with FAR 21.197 and 21.199 to operate airplanes to a base in order to comply with the requirements of this AD. All persons affected by this directive who have not already received the appropriate service documents from the manufacturer may obtain copies upon request to Boeing Commercial Airplanes, P.O. Box 3707, Seattle, Washington 98124. These documents may be examined at the FAA, Northwest Mountain Region, Transport Airplane Directorate, 17900 Pacific Highway South, Seattle, Washington, or Seattle Aircraft Certification Office, 9010 East Marginal Way South, Seattle, Washington. This AD supersedes AD 88-01-06 R1, Amendment 39-5990. This amendment (39-6673, AD 90-15-17) becomes effective on August 27, 1990. FOOTER:
Document Text
Show stored source text (verify against official source)
AD Final Rules - DRS_90-15-17.html Copy URL Print/Save as PDF Document Versions Feedback Details AD Number: 90-15-17 Document Type: AD Final Rules Docket Number: 89-NM-210-AD Subject Heading: Airworthiness Directives; BOEING Model 737 Series Airplanes Subject: Bypass Valves Status: Current Citation: This information is not available. Citation Publish Date: Effective Date: 08/27/1990 Make: The Boeing Company Model: 737-100 Series | 737-200 Series | 737-200C Series | 737-300 Series | 737-400 Series | 737-500 Series...Show more Product Type: Aircraft Product Subtype: Large Airplane Affected AD: Superseded AD: Affected By: Superseded By: Service/Office: Office of Primary Responsibility: CFR Part Reference: Part 39 Comments: AIRWORTHINESS DIRECTIVES FINAL RULES: 90-15-17 CITATION: This information is not available. PAGE NUMBER: DOCKET NUMBER: 89-NM-210-AD AMENDMENT: 39-6673 AD NUMBER: 90-15-17 SUBJECT HEADING: Airworthiness Directives; BOEING Model 737 Series Airplanes ACTION: SUMMARY: DATES: Effective August 27, 1990. ADDRESSES: FOR FURTHER INFORMATION CONTACT: SUPPLEMENTARY INFORMATION: REGULATORY TEXT: 90-15-17 BOEING: Amendment 39-6673. Docket No. 89-NM-210-AD. Applicability: Model 737 series airplanes, as listed in Boeing Alert Service Bulletin 737- 28A1072, dated August 27, 1987, certificated in any category. Compliance: Required as indicated, unless previously accomplished. To prevent engine fuel starvation resulting from main wing tank suction feed system stress fractures or fuel boost pump bypass valve freezing, accomplish the following: A. Prior to the accumulation of 150 flight hours after January 27, 1988 (the effective date of Amendment 39-5823, AD 88-01-06), and thereafter at intervals not to exceed 300 flight hours, perform an operational test of the bypass valves in accordance with Boeing Alert Service Bulletin 737-28A1072, dated August 27, 1987. B. The operational tests required by paragraph A., above, may be terminated when the fuel system modifications, detailed in Boeing Service Bulletin 737-28A1072, Revision 2, dated February 18, 1988, or Revision 3, dated October 6, 1988, are installed. C. For airplanes modified in accordance with paragraph B., above: Within one year after the effective date of this amendment, conduct an inspection of the suction feed bypass system for preloading in accordance with Boeing Alert Service Bulletin 737-28A1072, Revision 4, dated August 7, 1989. If preloading is discovered in the suction feed bypass system, prior to further flight, modify in accordance with that service bulletin. D. For all other airplanes: Within one year after the effective date of this amendment, modify the fuel boost pump bypass valves system in accordance with Boeing Alert Service Bulletin 737-28A1072, Revision 4, dated August 7, 1989. This modification constitutes terminating action for the repetitive operational tests required by paragraph A., above. E. An alternate means of compliance or adjustment of the compliance time, which provides an acceptable level of safety, may be used when approved by the Manager, Seattle Aircraft Certification Office (ACO), FAA, Transport Airplane Directorate. NOTE: The request should be submitted directly to the Manager, Seattle ACO, and a copy sent to the cognizant FAA Principal Inspector (PI). The PI will then forward comments or concurrence to the Seattle ACO. F. Special flight permits may be issued in accordance with FAR 21.197 and 21.199 to operate airplanes to a base in order to comply with the requirements of this AD. All persons affected by this directive who have not already received the appropriate service documents from the manufacturer may obtain copies upon request to Boeing Commercial Airplanes, P.O. Box 3707, Seattle, Washington 98124. These documents may be examined at the FAA, Northwest Mountain Region, Transport Airplane Directorate, 17900 Pacific Highway South, Seattle, Washington, or Seattle Aircraft Certification Office, 9010 East Marginal Way South, Seattle, Washington. This AD supersedes AD 88-01-06 R1, Amendment 39-5990. This amendment (39-6673, AD 90-15-17) becomes effective on August 27, 1990. FOOTER:
Source: Official FAA Source ↗
Retrieved: Apr 8, 2026
Rights: U.S. Government Public Domain
This site is not affiliated with or endorsed by the FAA. Always verify with official sources.