AD 89-19-03
Applicability
| Type | Manufacturer | Model | Details |
|---|---|---|---|
| aircraft | The Boeing Company | 767-200 Series | Airworthiness Directives; BOEING Model 767 Series Airplanes |
| aircraft | The Boeing Company | 767-300 Series | Airworthiness Directives; BOEING Model 767 Series Airplanes |
| aircraft | The Boeing Company | 767-300F Series | Airworthiness Directives; BOEING Model 767 Series Airplanes |
Unsafe Condition
Failure of the upper mounting bolts of cabin partitions with a wall-mounted flight attendant seat could result in loss of structural integrity of the cabin partitions.
AI-generated summary from the source AD text. Verify against the official source before acting.
Required Actions
Replace the upper mounting bolts of cabin partitions in accordance with Boeing Alert Service Bulletin 767-25A0135. An alternate means of compliance or adjustment of the compliance time may be approved by the Manager, Seattle Aircraft Certification Office. Special flight permits may be issued under FAR 21.197 and 21.199 to operate airplanes to a base for compliance.
AI-generated summary from the source AD text. Verify against the official source before acting.
Compliance Time
within 30 days after the effective date of this AD, unless previously accomplished
AI-generated summary from the source AD text. Verify against the official source before acting.
Affected Aircraft
BOEING Model 767-200 Series, 767-300 Series, 767-300F Series airplanes listed in Boeing Alert Service Bulletin 767-25A0135 dated July 6, 1989
AI-generated summary from the source AD text. Verify against the official source before acting.
Federal Register Abstract
Cabin Partitions
Applicability Source Text
Show captured applicability text from the source AD
AD Final Rules - DRS_89-19-03.html Copy URL Print/Save as PDF Document Versions Feedback Details AD Number: 89-19-03 Document Type: AD Final Rules Docket Number: 89-NM-164-AD Subject Heading: Airworthiness Directives; BOEING Model 767 Series Airplanes Subject: Cabin Partitions Status: Current Citation: This information is not available. Citation Publish Date: Effective Date: 09/19/1989 Make: The Boeing Company Model: 767-200 Series | 767-300 Series | 767-300F Series Product Type: Aircraft Product Subtype: Large Airplane Affected AD: Superseded AD: Affected By: Superseded By: Service/Office: Office of Primary Responsibility: CFR Part Reference: Part 39 Comments: AIRWORTHINESS DIRECTIVES FINAL RULES: 89-19-03 CITATION: This information is not available. PAGE NUMBER: DOCKET NUMBER: 89-NM-164-AD AMENDMENT: 39-6315 AD NUMBER: 89-19-03 SUBJECT HEADING: Airworthiness Directives; BOEING Model 767 Series Airplanes ACTION: SUMMARY: DATES: Effective September 19, 1989. ADDRESSES: FOR FURTHER INFORMATION CONTACT: SUPPLEMENTARY INFORMATION: REGULATORY TEXT: 89-19-03 BOEING: Amendment 39-6315. (Docket No. 89-NM-164-AD) Applicability: Model 767 series airplanes, as listed in Boeing Alert Service Bulletin 767- 25A0135, dated July 6, 1989, certificated in any category. Compliance: Required within 30 days after the effective date of this AD, unless previously accomplished. To ensure structural integrity of cabin partitions with a wall-mounted flight attendant seat, accomplish the following: A. Replace the upper mounting bolts of cabin partitions, in accordance with Boeing Alert Service Bulletin 767-25A0135, dated July 6, 1989. B. An alternate means of compliance or adjustment of the compliance time, which provides an acceptable level of safety, may be used when approved by the Manager, Seattle Aircraft Certification Office, FAA, Northwest Mountain Region. NOTE: The request should be forwarded through an FAA Principal Maintenance Inspector (PMI), who will either concur or comment and then send it to the Manager, Seattle Aircraft Certification Office. C. Special flight permits may be issued in accordance with FAR 21.197 and 21.199 to operate airplanes to a base in order to comply with the requirements of this AD. All persons affected by this directive who have not already received the appropriate service documents from the manufacturer may obtain copies upon request to Boeing Commercial Airplanes, P.O. Box 3707, Seattle, Washington 98124. These documents may be examined at the FAA, Northwest Mountain Region, Transport Airplane Directorate, 17900 Pacific Highway South, Seattle, Washington, or Seattle Aircraft Certification Office, 9010 East Marginal Way South, Seattle, Washington. This amendment (39-6315, AD 89-19-03) becomes effective on September 19, 1989. FOOTER:
Document Text
Show stored source text (verify against official source)
AD Final Rules - DRS_89-19-03.html Copy URL Print/Save as PDF Document Versions Feedback Details AD Number: 89-19-03 Document Type: AD Final Rules Docket Number: 89-NM-164-AD Subject Heading: Airworthiness Directives; BOEING Model 767 Series Airplanes Subject: Cabin Partitions Status: Current Citation: This information is not available. Citation Publish Date: Effective Date: 09/19/1989 Make: The Boeing Company Model: 767-200 Series | 767-300 Series | 767-300F Series Product Type: Aircraft Product Subtype: Large Airplane Affected AD: Superseded AD: Affected By: Superseded By: Service/Office: Office of Primary Responsibility: CFR Part Reference: Part 39 Comments: AIRWORTHINESS DIRECTIVES FINAL RULES: 89-19-03 CITATION: This information is not available. PAGE NUMBER: DOCKET NUMBER: 89-NM-164-AD AMENDMENT: 39-6315 AD NUMBER: 89-19-03 SUBJECT HEADING: Airworthiness Directives; BOEING Model 767 Series Airplanes ACTION: SUMMARY: DATES: Effective September 19, 1989. ADDRESSES: FOR FURTHER INFORMATION CONTACT: SUPPLEMENTARY INFORMATION: REGULATORY TEXT: 89-19-03 BOEING: Amendment 39-6315. (Docket No. 89-NM-164-AD) Applicability: Model 767 series airplanes, as listed in Boeing Alert Service Bulletin 767- 25A0135, dated July 6, 1989, certificated in any category. Compliance: Required within 30 days after the effective date of this AD, unless previously accomplished. To ensure structural integrity of cabin partitions with a wall-mounted flight attendant seat, accomplish the following: A. Replace the upper mounting bolts of cabin partitions, in accordance with Boeing Alert Service Bulletin 767-25A0135, dated July 6, 1989. B. An alternate means of compliance or adjustment of the compliance time, which provides an acceptable level of safety, may be used when approved by the Manager, Seattle Aircraft Certification Office, FAA, Northwest Mountain Region. NOTE: The request should be forwarded through an FAA Principal Maintenance Inspector (PMI), who will either concur or comment and then send it to the Manager, Seattle Aircraft Certification Office. C. Special flight permits may be issued in accordance with FAR 21.197 and 21.199 to operate airplanes to a base in order to comply with the requirements of this AD. All persons affected by this directive who have not already received the appropriate service documents from the manufacturer may obtain copies upon request to Boeing Commercial Airplanes, P.O. Box 3707, Seattle, Washington 98124. These documents may be examined at the FAA, Northwest Mountain Region, Transport Airplane Directorate, 17900 Pacific Highway South, Seattle, Washington, or Seattle Aircraft Certification Office, 9010 East Marginal Way South, Seattle, Washington. This amendment (39-6315, AD 89-19-03) becomes effective on September 19, 1989. FOOTER:
Source: Official FAA Source ↗
Retrieved: Apr 8, 2026
Rights: U.S. Government Public Domain
This site is not affiliated with or endorsed by the FAA. Always verify with official sources.
Related Airworthiness Directives
2026-05-07
final ruleAirworthiness Directives; The Boeing Company Airplanes
Unsafe Condition: Discovery of a crack at one of the forward lower fastener holes following replacement of a cracked underwing longeron (UWL) fitting. Such cracking could result in loss in the primary load path betw...
2026-05-03 Recurring
final ruleAirworthiness Directives; The Boeing Company Airplanes
Unsafe Condition: scribe lines found at skin lap joints and butt joints, around external repairs and antennas, and at locations where external decals had been cut, which could develop into fatigue cracks in the skin...
2026-04-10 Recurring
final ruleAirworthiness Directives; The Boeing Company Airplanes
Unsafe Condition: Corrosion damage on the Model 767 satellite communications (SATCOM) high gain antenna adapter plate, which could result in parts departing the airplane (PDA). A PDA event of the SATCOM high gain an...
2025-15-08 Recurring
final ruleAirworthiness Directives; The Boeing Company Airplanes
Unsafe Condition: uncommanded fore and aft movement of the Captain's and First Officer's seats, which could cause a flight control obstruction or unintended flight control input, resulting in the loss of the ability...