AD 88-03-05

final rule

Airworthiness Directives; HAMBURGER FLUGZEUGBAU Model HFB-320-HANSA Series Airplanes

AD Number
88-03-05
Status
final_rule
Effective Date
Product Category
aircraft
Docket
Unknown
FR Citation
This information is not available.
Technical illustration of an aircraft landing gear and wheel assembly
Problem area Landing gear

Applicability

TypeManufacturerModelDetails
aircraft Hamburger Flugzeugbau G.m.b.H. HFB 320 Hansa Airworthiness Directives; HAMBURGER FLUGZEUGBAU Model HFB-320-HANSA Series Airplanes

Unsafe Condition

Asymmetric configuration of wing flaps, slats, and speed brakes due to failure of bolts, drive shafts, or rotary selectors may cause degradation of lateral control.

AI-generated summary from the source AD text. Verify against the official source before acting.

Required Actions

Within 30 days after the effective date, inspect and replace as necessary the bolts, drive shafts, and rotary selectors for the wing flaps, slats, and speed brakes per Messerschmitt-Bolkow-Blohm GmbH Service Bulletin 27-74 dated July 1, 1986. Alternate means of compliance or adjustment may be used with FAA concurrence.

AI-generated summary from the source AD text. Verify against the official source before acting.

Compliance Time

Within 30 days after the effective date of this AD

AI-generated summary from the source AD text. Verify against the official source before acting.

Affected Aircraft

HAMBURGER FLUGZEUGBAU Model HFB-320-HANSA series airplanes, Serial Numbers 1021, 1023, 1026, 1030, 1033, 1035, 1040, 1045, and 1050-1057

AI-generated summary from the source AD text. Verify against the official source before acting.

Federal Register Abstract

Wing Flaps, Slats, Speed Brakes

Applicability Source Text

Show captured applicability text from the source AD
AD Final Rules - DRS_88-03-05.html
Copy URL
Print/Save as PDF
Document Versions
 Feedback
Details
AD Number:
88-03-05
Document Type:
AD Final Rules
Docket Number:
Unknown
Subject Heading:
Airworthiness Directives; HAMBURGER FLUGZEUGBAU Model HFB-320-HANSA Series Airplanes
Subject:
Wing Flaps, Slats, Speed Brakes
Status:
Current
Citation:
This information is not available.
Citation Publish Date:
Effective Date:
02/28/1988
Make:
Hamburger Flugzeugbau G.m.b.H.
Model:
HFB 320 Hansa
Product Type:
Aircraft
Product Subtype:
Large Airplane
Affected AD:
Superseded AD:
Affected By:
Superseded By:
Service/Office:
Office of Primary Responsibility:
CFR Part Reference:
Part 39
Comments:
AIRWORTHINESS DIRECTIVES FINAL RULES: 88-03-05
CITATION:   This information is not available.

PAGE NUMBER:  

DOCKET NUMBER:   Unknown

AMENDMENT:   39-5834

AD NUMBER:   88-03-05

SUBJECT HEADING:   Airworthiness Directives; HAMBURGER FLUGZEUGBAU Model HFB-320-HANSA Series Airplanes

ACTION:  

SUMMARY:  

DATES:   Effective February 28, 1988.

ADDRESSES:  

FOR FURTHER INFORMATION CONTACT:  

SUPPLEMENTARY INFORMATION:  

REGULATORY TEXT:   88-03-05 HAMBURGER FLUGZEUGBAU: Amendment 39-5834. Applies to Model HFB- 320-HANSA series airplanes, Serial Numbers 1021, 1023, 1026, 1030, 1033, 1035, 1040, 1045, and 1050-1057, certificated in any category. Compliance required as indicated, unless previously accomplished:

To prevent asymmetric configuration which may cause degradation of lateral control, accomplish the following:

A. Within 30 days after the effective date of this AD, inspect and replace, as necessary, the bolts, drive shafts, and rotary selectors for the wing flaps, slats, and speed brakes, in accordance with Messerschmitt-Bolkow-Blohm GmbH Service Bulletin 27-74, dated July 1, 1986.

B. An alternate means of compliance or adjustment of the compliance time, which provides an acceptable level of safety and which has the concurrence of an FAA Principal Maintenance Inspector, may be used when approved by the Manager, Standardization Branch, ANM-113, FAA, Northwest Mountain Region.

C. Special flight permits may be issued in accordance with FAR 21.197 and 21.199 to operate airplanes to a base for the accomplishment of inspections and/or modifications required by this AD.

All persons affected by this directive who have not already received the appropriate service documents from the manufacturer may obtain copies upon request to Messerschmitt- Bolkow- Blohm GmbH, Postfach 95 01 09, D-2103 Hamburg 95, Federal Republic of Germany. These documents may be examined at the FAA, Northwest Mountain Region, 17900 Pacific Highway South, Seattle, Washington, or at the Seattle Aircraft Certification Office, 9010 East Marginal Way South, Seattle, Washington.

This amendment becomes effective February 28, 1988.

FOOTER:

Document Text

Show stored source text (verify against official source)
AD Final Rules - DRS_88-03-05.html
Copy URL
Print/Save as PDF
Document Versions
 Feedback
Details
AD Number:
88-03-05
Document Type:
AD Final Rules
Docket Number:
Unknown
Subject Heading:
Airworthiness Directives; HAMBURGER FLUGZEUGBAU Model HFB-320-HANSA Series Airplanes
Subject:
Wing Flaps, Slats, Speed Brakes
Status:
Current
Citation:
This information is not available.
Citation Publish Date:
Effective Date:
02/28/1988
Make:
Hamburger Flugzeugbau G.m.b.H.
Model:
HFB 320 Hansa
Product Type:
Aircraft
Product Subtype:
Large Airplane
Affected AD:
Superseded AD:
Affected By:
Superseded By:
Service/Office:
Office of Primary Responsibility:
CFR Part Reference:
Part 39
Comments:
AIRWORTHINESS DIRECTIVES FINAL RULES: 88-03-05
CITATION:   This information is not available.

PAGE NUMBER:  

DOCKET NUMBER:   Unknown

AMENDMENT:   39-5834

AD NUMBER:   88-03-05

SUBJECT HEADING:   Airworthiness Directives; HAMBURGER FLUGZEUGBAU Model HFB-320-HANSA Series Airplanes

ACTION:  

SUMMARY:  

DATES:   Effective February 28, 1988.

ADDRESSES:  

FOR FURTHER INFORMATION CONTACT:  

SUPPLEMENTARY INFORMATION:  

REGULATORY TEXT:   88-03-05 HAMBURGER FLUGZEUGBAU: Amendment 39-5834. Applies to Model HFB- 320-HANSA series airplanes, Serial Numbers 1021, 1023, 1026, 1030, 1033, 1035, 1040, 1045, and 1050-1057, certificated in any category. Compliance required as indicated, unless previously accomplished:

To prevent asymmetric configuration which may cause degradation of lateral control, accomplish the following:

A. Within 30 days after the effective date of this AD, inspect and replace, as necessary, the bolts, drive shafts, and rotary selectors for the wing flaps, slats, and speed brakes, in accordance with Messerschmitt-Bolkow-Blohm GmbH Service Bulletin 27-74, dated July 1, 1986.

B. An alternate means of compliance or adjustment of the compliance time, which provides an acceptable level of safety and which has the concurrence of an FAA Principal Maintenance Inspector, may be used when approved by the Manager, Standardization Branch, ANM-113, FAA, Northwest Mountain Region.

C. Special flight permits may be issued in accordance with FAR 21.197 and 21.199 to operate airplanes to a base for the accomplishment of inspections and/or modifications required by this AD.

All persons affected by this directive who have not already received the appropriate service documents from the manufacturer may obtain copies upon request to Messerschmitt- Bolkow- Blohm GmbH, Postfach 95 01 09, D-2103 Hamburg 95, Federal Republic of Germany. These documents may be examined at the FAA, Northwest Mountain Region, 17900 Pacific Highway South, Seattle, Washington, or at the Seattle Aircraft Certification Office, 9010 East Marginal Way South, Seattle, Washington.

This amendment becomes effective February 28, 1988.

FOOTER:

Source: Official FAA Source ↗

Retrieved: Apr 8, 2026

Rights: U.S. Government Public Domain

This site is not affiliated with or endorsed by the FAA. Always verify with official sources.