AD 85-07-02

AD Final Rules - DRS_85-07-02.html
Copy URL
Print/Save as PDF
Document Versions
 Feedback
Details
AD Number:
85-07-02
Document Type:
AD Final Rules
Docket Number:
Unknown
Subject Heading:
BOEING Model 757 Airplanes
Subject:
Cargo Blowout Panels
Status:
Current
Citation:
This information is not available.
Citation Publish Date:
Effective Date:
05/13/1985
Make:
The Boeing Company
Model:
757-200 Series | 757-200CB Series | 757-200PF Series | 757-300 Series
Product Type:
Aircraft
Product Subtype:
Large Airplane
Affected AD:
Superseded AD:
Affected By:
Superseded By:
Service/Office:
Office of Primary Responsibility:
CFR Part Reference:
Part 39
Comments:
AIRWORTHINESS DIRECTIVES FINAL RULES: 85-07-02
CITATION:   This information is not available.

PAGE NUMBER:  

DOCKET NUMBER:   Unknown

AMENDMENT:   39-5036

AD NUMBER:   85-07-02

SUBJECT HEADING:   BOEING Model 757 Airplanes

ACTION:  

SUMMARY:  

DATES:   Effective May 13, 1985.

ADDRESSES:  

FOR FURTHER INFORMATION CONTACT:  

SUPPLEMENTARY INFORMATION:  

REGULATORY TEXT:  
85-07-02 BOEING: Amendment 39-5036. Applies to Boeing Model 757 airplanes listed in the Boeing Service Bulletin 757-25A0036, Revision 1, dated September 21, 1984. To prevent degradation of fire protection capability in the cargo compartments, accomplish the following within 120 days after the effective date of this AD, unless already accomplished:

A. Replace the existing cargo compartment blowout panels in accordance with Boeing Service Bulletin 757-25A0036, Revision 1, dated September 21, 1984, or later FAA approved revision.

B. Alternate means of compliance which provide an acceptable level of safety may be used when approved by the Manager, Seattle Aircraft Certification Office, FAA, Northwest Mountain Region.

C. Special flight permits may be issued in accordance with FAR 21.197 and 21.199 to operate airplanes to a base for the accomplishment of replacements required by this AD.
All persons affected by this directive who have not already received the above specified service bulletins from the manufacturer may obtain copies upon request to the Boeing Commercial Airplane Company, P.O. Box 3707, Seattle, Washington 98124. These documents also may be examined at the FAA, Northwest Mountain Region, Seattle Aircraft Certification Office, 9010 East Marginal Way South, Seattle, Washington.
This amendment becomes effective May 13, 1985.

FOOTER: