AD 84-19-04

final rule

TELEDYNE CONTINENTAL Model TSIO-520-BE Engines

AD Number
84-19-04
Status
final_rule
Effective Date
Product Category
engine
Docket
Unknown
FR Citation
This information is not available.
Technical illustration of an aircraft fuel pump, filter, valve, and lines
Problem area Fuel system

Applicability

TypeManufacturerModelDetails
engine Continental Motors TSIO-520-BE TELEDYNE CONTINENTAL Model TSIO-520-BE Engines

Unsafe Condition

Possible failure of the engine driven fuel pump leading to loss of fuel pressure.

AI-generated summary from the source AD text. Verify against the official source before acting.

Required Actions

Remove the engine driven fuel pump assembly and replace with a serviceable pump. Modified pumps identified by a 'K' mark on the name plate or purple color on the high pressure aneroid housing may be reinstalled.

AI-generated summary from the source AD text. Verify against the official source before acting.

Compliance Time

Prior to further flight

AI-generated summary from the source AD text. Verify against the official source before acting.

Affected Aircraft

Teledyne Continental Motors TSIO-520-BE engines with fuel pump assemblies part number 646571-1 and specific serial numbers listed in the AD.

AI-generated summary from the source AD text. Verify against the official source before acting.

Federal Register Abstract

Fuel Pump Assembly

Applicability Source Text

Show captured applicability text from the source AD
AD Final Rules - DRS_84-19-04.html
Copy URL
Print/Save as PDF
Document Versions
 Feedback
Details
AD Number:
84-19-04
Document Type:
AD Final Rules
Docket Number:
Unknown
Subject Heading:
TELEDYNE CONTINENTAL Model TSIO-520-BE Engines
Subject:
Fuel Pump Assembly
Status:
Current
Citation:
This information is not available.
Citation Publish Date:
Effective Date:
Make:
Continental Motors
Model:
TSIO-520-BE
Product Type:
Engine
Product Subtype:
Affected AD:
Superseded AD:
Affected By:
Superseded By:
Service/Office:
Office of Primary Responsibility:
CFR Part Reference:
Part 39
Comments:
AIRWORTHINESS DIRECTIVES FINAL RULES: 84-19-04
CITATION:   This information is not available.

PAGE NUMBER:  

DOCKET NUMBER:   Unknown

AMENDMENT:  

AD NUMBER:   84-19-04

SUBJECT HEADING:   TELEDYNE CONTINENTAL Model TSIO-520-BE Engines

ACTION:  

SUMMARY:  

DATES:  

ADDRESSES:  

FOR FURTHER INFORMATION CONTACT:  

SUPPLEMENTARY INFORMATION:  

REGULATORY TEXT:   84-19-04 TELEDYNE CONTINENTAL: Letter issued September 19, 1984. Applies to Teledyne Continental Motors TSIO-520-BE reciprocating engines incorporating part number 646571-1 fuel pumps of the following serial numbers:

Fuel Pump Assembly Serial Number	Engine Serial Number (Reference)
E108405B	528044
E108406B	528065
E108407B	528056
E108408B	528054
E108409B	528060
E108410B	528062
E108411B	528061
E108412B	528064
E108413B	528049
E158413B	528023
E158414B	528066
E168401B	528068
E168403B	528069
E168404B	528067
F018401B	528073
F081402B	528071
F018403B	528072
F068403B	528070
F158403B	528077
F158405B	528081
F158406B	528079
F188401B	528084
F188405B	528082
F198411B	528085

Compliance is required as indicated unless already accomplished. To prevent loss of fuel pressure from possible failure of the engine driven fuel pump, accomplish the following:
Prior to further flight, remove the engine driven fuel pump assembly and replace with a serviceable pump.
NOTE: Fuel pumps of the above listed part number and serial numbers may be reinstalled after modification of the drive mechanism by Teledyne Continental Motors. Modified pumps will be identified by a "K" permanently marked in the upper right hand corner of the fuel pump name plate. In addition, temporary identification of the modified pumps is provided by a purple color on the high pressure aneroid housing.
Upon request of an operator, an equivalent means of compliance with the requirements of this AD may be approved by the Manager, Atlanta Aircraft Certification Office, Federal Aviation Administration.
This airworthiness directive becomes effective upon receipt.

FOOTER:

Document Text

Show stored source text (verify against official source)
AD Final Rules - DRS_84-19-04.html
Copy URL
Print/Save as PDF
Document Versions
 Feedback
Details
AD Number:
84-19-04
Document Type:
AD Final Rules
Docket Number:
Unknown
Subject Heading:
TELEDYNE CONTINENTAL Model TSIO-520-BE Engines
Subject:
Fuel Pump Assembly
Status:
Current
Citation:
This information is not available.
Citation Publish Date:
Effective Date:
Make:
Continental Motors
Model:
TSIO-520-BE
Product Type:
Engine
Product Subtype:
Affected AD:
Superseded AD:
Affected By:
Superseded By:
Service/Office:
Office of Primary Responsibility:
CFR Part Reference:
Part 39
Comments:
AIRWORTHINESS DIRECTIVES FINAL RULES: 84-19-04
CITATION:   This information is not available.

PAGE NUMBER:  

DOCKET NUMBER:   Unknown

AMENDMENT:  

AD NUMBER:   84-19-04

SUBJECT HEADING:   TELEDYNE CONTINENTAL Model TSIO-520-BE Engines

ACTION:  

SUMMARY:  

DATES:  

ADDRESSES:  

FOR FURTHER INFORMATION CONTACT:  

SUPPLEMENTARY INFORMATION:  

REGULATORY TEXT:   84-19-04 TELEDYNE CONTINENTAL: Letter issued September 19, 1984. Applies to Teledyne Continental Motors TSIO-520-BE reciprocating engines incorporating part number 646571-1 fuel pumps of the following serial numbers:

Fuel Pump Assembly Serial Number	Engine Serial Number (Reference)
E108405B	528044
E108406B	528065
E108407B	528056
E108408B	528054
E108409B	528060
E108410B	528062
E108411B	528061
E108412B	528064
E108413B	528049
E158413B	528023
E158414B	528066
E168401B	528068
E168403B	528069
E168404B	528067
F018401B	528073
F081402B	528071
F018403B	528072
F068403B	528070
F158403B	528077
F158405B	528081
F158406B	528079
F188401B	528084
F188405B	528082
F198411B	528085

Compliance is required as indicated unless already accomplished. To prevent loss of fuel pressure from possible failure of the engine driven fuel pump, accomplish the following:
Prior to further flight, remove the engine driven fuel pump assembly and replace with a serviceable pump.
NOTE: Fuel pumps of the above listed part number and serial numbers may be reinstalled after modification of the drive mechanism by Teledyne Continental Motors. Modified pumps will be identified by a "K" permanently marked in the upper right hand corner of the fuel pump name plate. In addition, temporary identification of the modified pumps is provided by a purple color on the high pressure aneroid housing.
Upon request of an operator, an equivalent means of compliance with the requirements of this AD may be approved by the Manager, Atlanta Aircraft Certification Office, Federal Aviation Administration.
This airworthiness directive becomes effective upon receipt.

FOOTER:

Source: Official FAA Source ↗

Retrieved: Apr 8, 2026

Rights: U.S. Government Public Domain

This site is not affiliated with or endorsed by the FAA. Always verify with official sources.