AD 82-10-03
final rule
Applicability
| Type | Manufacturer | Model | Details |
|---|---|---|---|
| aircraft | The Boeing Company | 727-100 Series | BOEING Model 727 Airplanes |
| aircraft | The Boeing Company | 727-100C Series | BOEING Model 727 Airplanes |
| aircraft | The Boeing Company | 727-200 Series | BOEING Model 727 Airplanes |
| aircraft | The Boeing Company | 727-200F Series | BOEING Model 727 Airplanes |
| aircraft | The Boeing Company | 727 Series | BOEING Model 727 Airplanes |
| aircraft | The Boeing Company | 727C Series | BOEING Model 727 Airplanes |
Unsafe Condition
Failure of the ground spoiler hydraulic tube assemblies due to cross-connecting during installation could result in loss of ground spoiler function and subsequent inability to control the airplane during ground operations.
AI-generated summary from the source AD text. Verify against the official source before acting.
Required Actions
Replace the ground spoiler hydraulic tube assemblies per figure 1 of Boeing Service Bulletin 727-27-202, or color code them per figure 2 of the same bulletin. Alternate means of compliance may be approved by the FAA.
AI-generated summary from the source AD text. Verify against the official source before acting.
Compliance Time
within the next 2500 hours time-in-service from the effective date of this AD
AI-generated summary from the source AD text. Verify against the official source before acting.
Affected Aircraft
Boeing Model 727 airplanes, line number 1 through 1612, certificated in all categories
AI-generated summary from the source AD text. Verify against the official source before acting.
Federal Register Abstract
Hydraulic Tube Assemblies
Applicability Source Text
Show captured applicability text from the source AD
AD Final Rules - DRS_82-10-03.html Copy URL Print/Save as PDF Document Versions Feedback Details AD Number: 82-10-03 Document Type: AD Final Rules Docket Number: Unknown Subject Heading: BOEING Model 727 Airplanes Subject: Hydraulic Tube Assemblies Status: Current Citation: This information is not available. Citation Publish Date: Effective Date: 06/11/1982 Make: The Boeing Company Model: 727-100 Series | 727-100C Series | 727-200 Series | 727-200F Series | 727 Series | 727C Series Product Type: Aircraft Product Subtype: Large Airplane Affected AD: Superseded AD: Affected By: Superseded By: Service/Office: Office of Primary Responsibility: CFR Part Reference: Part 39 Comments: AIRWORTHINESS DIRECTIVES FINAL RULES: 82-10-03 CITATION: This information is not available. PAGE NUMBER: DOCKET NUMBER: Unknown AMENDMENT: 39-4375 AD NUMBER: 82-10-03 SUBJECT HEADING: BOEING Model 727 Airplanes ACTION: SUMMARY: DATES: Effective June 11, 1982. ADDRESSES: FOR FURTHER INFORMATION CONTACT: SUPPLEMENTARY INFORMATION: REGULATORY TEXT: 82-10-03 BOEING: Amendment 39-4375. Applies to Boeing Model 727 airplanes, line number 1 through 1612, certificated in all categories. Compliance is required within the next 2500 hours time-in-service from the effective date of this AD, unless already accomplished. To minimize the possibility of cross-connecting the ground spoiler hydraulic tube assemblies, accomplish either one of the following, unless already accomplished: A. Replace the ground spoiler hydraulic tube assemblies per figure 1 of Boeing Service Bulletin 727-27-202, Revision 1, dated December 18, 1981, or later revisions approved by the Chief, Seattle Area Aircraft Certification Office, FAA Northwest Mountain Region. B. Color code the ground spoiler hydraulic tube assemblies per figure 2 of the same bulletin. Alternate means of compliance with the AD which provide an equivalent level of safety may be used when approved by the Chief, Seattle Area Aircraft Certification Office, FAA Northwest Mountain Region. Special flight permits may be issued in accordance with FAR 21.197 and 21.199 to operate airplanes to a base for the accomplishment of inspections and/or modifications required by this AD. This Amendment becomes effective June 11, 1982. FOOTER:
Document Text
Show stored source text (verify against official source)
AD Final Rules - DRS_82-10-03.html Copy URL Print/Save as PDF Document Versions Feedback Details AD Number: 82-10-03 Document Type: AD Final Rules Docket Number: Unknown Subject Heading: BOEING Model 727 Airplanes Subject: Hydraulic Tube Assemblies Status: Current Citation: This information is not available. Citation Publish Date: Effective Date: 06/11/1982 Make: The Boeing Company Model: 727-100 Series | 727-100C Series | 727-200 Series | 727-200F Series | 727 Series | 727C Series Product Type: Aircraft Product Subtype: Large Airplane Affected AD: Superseded AD: Affected By: Superseded By: Service/Office: Office of Primary Responsibility: CFR Part Reference: Part 39 Comments: AIRWORTHINESS DIRECTIVES FINAL RULES: 82-10-03 CITATION: This information is not available. PAGE NUMBER: DOCKET NUMBER: Unknown AMENDMENT: 39-4375 AD NUMBER: 82-10-03 SUBJECT HEADING: BOEING Model 727 Airplanes ACTION: SUMMARY: DATES: Effective June 11, 1982. ADDRESSES: FOR FURTHER INFORMATION CONTACT: SUPPLEMENTARY INFORMATION: REGULATORY TEXT: 82-10-03 BOEING: Amendment 39-4375. Applies to Boeing Model 727 airplanes, line number 1 through 1612, certificated in all categories. Compliance is required within the next 2500 hours time-in-service from the effective date of this AD, unless already accomplished. To minimize the possibility of cross-connecting the ground spoiler hydraulic tube assemblies, accomplish either one of the following, unless already accomplished: A. Replace the ground spoiler hydraulic tube assemblies per figure 1 of Boeing Service Bulletin 727-27-202, Revision 1, dated December 18, 1981, or later revisions approved by the Chief, Seattle Area Aircraft Certification Office, FAA Northwest Mountain Region. B. Color code the ground spoiler hydraulic tube assemblies per figure 2 of the same bulletin. Alternate means of compliance with the AD which provide an equivalent level of safety may be used when approved by the Chief, Seattle Area Aircraft Certification Office, FAA Northwest Mountain Region. Special flight permits may be issued in accordance with FAR 21.197 and 21.199 to operate airplanes to a base for the accomplishment of inspections and/or modifications required by this AD. This Amendment becomes effective June 11, 1982. FOOTER:
Source: Official FAA Source ↗
Retrieved: Apr 8, 2026
Rights: U.S. Government Public Domain
This site is not affiliated with or endorsed by the FAA. Always verify with official sources.