AD 81-04-05 R1
Applicability
| Type | Manufacturer | Model | Details |
|---|---|---|---|
| aircraft | Piper Aircraft Inc. | PA-23 | Airworthiness Directives; Piper Model PA-23, PA-23-235 and PA-23-250 Airplanes |
| aircraft | Piper Aircraft Inc. | PA-23-235 | Airworthiness Directives; Piper Model PA-23, PA-23-235 and PA-23-250 Airplanes |
| aircraft | Piper Aircraft Inc. | PA-23-250 | Airworthiness Directives; Piper Model PA-23, PA-23-235 and PA-23-250 Airplanes |
| aircraft | Piper Aircraft Inc. | PA-23-250 (Navy UO-1) | Airworthiness Directives; Piper Model PA-23, PA-23-235 and PA-23-250 Airplanes |
Unsafe Condition
Malfunctioning of the flaps and flap control system due to cracks in the flap-spar hinge attachment areas and bellcrank.
AI-generated summary from the source AD text. Verify against the official source before acting.
Required Actions
Inspect and repair flap-spar hinge attachment areas for cracks per Piper Service Letter No. 853. Inspect flap control system for cracks per Piper Service Bulletin No. 671. Replace bellcrank with Piper P/N 16423-06 if cracks are found before further flight.
AI-generated summary from the source AD text. Verify against the official source before acting.
Compliance Time
Within the next 100 or 50 hours in service based on hours in service, with subsequent inspections at intervals not exceeding 100 hours in service. For bellcrank replacement, before further flight.
AI-generated summary from the source AD text. Verify against the official source before acting.
Affected Aircraft
Piper Model PA-23, PA-23-235, PA-23-250 (including Navy UO-1), serial numbers PA-23 S/N 23-1 thru 23-2046; PA-23-235 S/N 27-505 thru 27-622; PA-23-250 S/N 27-1 thru 27-504; PA-23-250 (6 place) S/N 27-2000 thru 27-8054059.
AI-generated summary from the source AD text. Verify against the official source before acting.
Federal Register Abstract
Flap-Spar Hinge Attachment
Applicability Source Text
Show captured applicability text from the source AD
AD Final Rules - DRS_81-04-05_R.html Copy URL Print/Save as PDF Document Versions Feedback Details AD Number: 81-04-05 R1 Document Type: AD Final Rules Docket Number: Unknown Subject Heading: Airworthiness Directives; Piper Model PA-23, PA-23-235 and PA-23-250 Airplanes Subject: Flap-Spar Hinge Attachment Status: Current Citation: This information is not available. Citation Publish Date: 02/08/1982 Effective Date: 02/11/1982 Make: Piper Aircraft Inc. Model: PA-23 | PA-23-235 | PA-23-250 | PA-23-250 (Navy UO-1) Product Type: Aircraft Product Subtype: Small Airplane Affected AD: Superseded AD: Affected By: Superseded By: Service/Office: AIR-700: Compliance & Airworthiness Division Office of Primary Responsibility: AIR-720: Operational Safety Branch CFR Part Reference: Part 39 Comments: AIRWORTHINESS DIRECTIVES FINAL RULES: 81-04-05 R1 CITATION: This information is not available. PAGE NUMBER: DOCKET NUMBER: Unknown AMENDMENT: 39-4312 AD NUMBER: 81-04-05 R1 SUBJECT HEADING: Airworthiness Directives; Piper Model PA-23, PA-23-235 and PA-23-250 Airplanes ACTION: SUMMARY: DATES: Effective February 11, 1982. ADDRESSES: FOR FURTHER INFORMATION CONTACT: SUPPLEMENTARY INFORMATION: REGULATORY TEXT: 81-04-05 R1 PIPER: Amendment 39-4040 as amended by amendment 39-4312. Applies to the following Piper PA-23 Series airplanes certificated in all categories: PA-23 S/N 23-1 thru 23-2046 PA-23-235 S/N 27-505 thru 27-622 PA-23-250 S/N 27-1 thru 27-504 PA-23-250 (6 place) S/N 27-2000 thru 27-8054059 (a) To prevent malfunctioning of the flaps comply with the following: (1) For all referenced airplanes except PA-23-250s (6 place) above S/N 27- 7405300, inspect the flap-spar hinge attachment areas for cracks and repair if necessary in accordance with the instructions paragraph of Piper Service Letter No. 853 dated June 8, 1979, or equivalent as follows: (i) Airplanes with more than 2000 hours in service but not exceeding 3000 hours, inspect and repair if necessary within the next 100 hours in service and thereafter at intervals not to exceed 100 hours in service since the last inspection. (ii) Airplanes with more than 3000 hours in service, inspect and repair if necessary, within the next 50 hours in service, unless already inspected within the last 50 hours in service, and thereafter at intervals not to exceed 100 hours in service since the last inspection. (2) When the flaps are replaced by the appropriate flaps in accordance with the part numbers in the Materials Required section in Piper Service Letter No. 853 dated June 8, 1979, or equivalent, further compliance with (a) is not required. (b) To prevent malfunctioning of the flap control system, comply with the following: (1) For all referenced airplanes, inspect the flap control system for cracks and repair if necessary in accordance with steps 1 through 13 under "instructions" in Piper Service Bulletin No. 671 dated October 20, 1980 or equivalent, and alter in accordance with step 9, as follows: (i) Airplanes with more than 1000 hours in service but not exceeding 2000 hours, comply with (b)(1) within the next 100 hours in service, unless already accomplished. (ii) Airplanes with more than 2000 hours in service, comply with (b)(1) within the next 50 hours in service, unless already accomplished. (2) After the bellcrank, Piper Number 16423-00, is reassembled in accordance with 4e in Service Bulletin 671, conduct a visual inspection of the bellcrank for cracks at intervals not to exceed 100 hours in service after the initial inspection of step 4. If cracks are found replace with new bellcrank Piper P/N 16423-06, or equivalent, before further flight. Upon installation of bellcrank Piper P/N 16423-06, or equivalent, the repetitive inspections are no longer required. Equivalent inspections, parts and alterations must be approved by the Chief, Engineering and Manufacturing Branch, FAA Eastern Region. Upon submittal of substantiating data by an owner or operator through an FAA Maintenance Inspector, the Chief, Engineering and Manufacturing Branch, FAA, Eastern Region, may adjust the compliance times specified in this AD. Amendment 39-4040 was effective February 12, 1981. This amendment 39-4312 is effective February 11, 1982. FOOTER:
Document Text
Show stored source text (verify against official source)
AD Final Rules - DRS_81-04-05_R.html Copy URL Print/Save as PDF Document Versions Feedback Details AD Number: 81-04-05 R1 Document Type: AD Final Rules Docket Number: Unknown Subject Heading: Airworthiness Directives; Piper Model PA-23, PA-23-235 and PA-23-250 Airplanes Subject: Flap-Spar Hinge Attachment Status: Current Citation: This information is not available. Citation Publish Date: 02/08/1982 Effective Date: 02/11/1982 Make: Piper Aircraft Inc. Model: PA-23 | PA-23-235 | PA-23-250 | PA-23-250 (Navy UO-1) Product Type: Aircraft Product Subtype: Small Airplane Affected AD: Superseded AD: Affected By: Superseded By: Service/Office: AIR-700: Compliance & Airworthiness Division Office of Primary Responsibility: AIR-720: Operational Safety Branch CFR Part Reference: Part 39 Comments: AIRWORTHINESS DIRECTIVES FINAL RULES: 81-04-05 R1 CITATION: This information is not available. PAGE NUMBER: DOCKET NUMBER: Unknown AMENDMENT: 39-4312 AD NUMBER: 81-04-05 R1 SUBJECT HEADING: Airworthiness Directives; Piper Model PA-23, PA-23-235 and PA-23-250 Airplanes ACTION: SUMMARY: DATES: Effective February 11, 1982. ADDRESSES: FOR FURTHER INFORMATION CONTACT: SUPPLEMENTARY INFORMATION: REGULATORY TEXT: 81-04-05 R1 PIPER: Amendment 39-4040 as amended by amendment 39-4312. Applies to the following Piper PA-23 Series airplanes certificated in all categories: PA-23 S/N 23-1 thru 23-2046 PA-23-235 S/N 27-505 thru 27-622 PA-23-250 S/N 27-1 thru 27-504 PA-23-250 (6 place) S/N 27-2000 thru 27-8054059 (a) To prevent malfunctioning of the flaps comply with the following: (1) For all referenced airplanes except PA-23-250s (6 place) above S/N 27- 7405300, inspect the flap-spar hinge attachment areas for cracks and repair if necessary in accordance with the instructions paragraph of Piper Service Letter No. 853 dated June 8, 1979, or equivalent as follows: (i) Airplanes with more than 2000 hours in service but not exceeding 3000 hours, inspect and repair if necessary within the next 100 hours in service and thereafter at intervals not to exceed 100 hours in service since the last inspection. (ii) Airplanes with more than 3000 hours in service, inspect and repair if necessary, within the next 50 hours in service, unless already inspected within the last 50 hours in service, and thereafter at intervals not to exceed 100 hours in service since the last inspection. (2) When the flaps are replaced by the appropriate flaps in accordance with the part numbers in the Materials Required section in Piper Service Letter No. 853 dated June 8, 1979, or equivalent, further compliance with (a) is not required. (b) To prevent malfunctioning of the flap control system, comply with the following: (1) For all referenced airplanes, inspect the flap control system for cracks and repair if necessary in accordance with steps 1 through 13 under "instructions" in Piper Service Bulletin No. 671 dated October 20, 1980 or equivalent, and alter in accordance with step 9, as follows: (i) Airplanes with more than 1000 hours in service but not exceeding 2000 hours, comply with (b)(1) within the next 100 hours in service, unless already accomplished. (ii) Airplanes with more than 2000 hours in service, comply with (b)(1) within the next 50 hours in service, unless already accomplished. (2) After the bellcrank, Piper Number 16423-00, is reassembled in accordance with 4e in Service Bulletin 671, conduct a visual inspection of the bellcrank for cracks at intervals not to exceed 100 hours in service after the initial inspection of step 4. If cracks are found replace with new bellcrank Piper P/N 16423-06, or equivalent, before further flight. Upon installation of bellcrank Piper P/N 16423-06, or equivalent, the repetitive inspections are no longer required. Equivalent inspections, parts and alterations must be approved by the Chief, Engineering and Manufacturing Branch, FAA Eastern Region. Upon submittal of substantiating data by an owner or operator through an FAA Maintenance Inspector, the Chief, Engineering and Manufacturing Branch, FAA, Eastern Region, may adjust the compliance times specified in this AD. Amendment 39-4040 was effective February 12, 1981. This amendment 39-4312 is effective February 11, 1982. FOOTER:
Source: Official FAA Source ↗
Retrieved: Apr 8, 2026
Rights: U.S. Government Public Domain
This site is not affiliated with or endorsed by the FAA. Always verify with official sources.