AD 80-08-14

final rule

Airworthiness Directives; PURE-AIR, INC.: Applies to all Aircraft using the Pure-Air, Inc. Carburetor Air Inlet Filter

AD Number
80-08-14
Status
final_rule
Effective Date
Product Category
appliance
Docket
Unknown
FR Citation
This information is not available.

Applicability

TypeManufacturerModelDetails
aircraft Pure Air, Inc. Carburetor Air Inlet Filter Airworthiness Directives; PURE-AIR, INC.: Applies to all Aircraft using the Pure-Air, Inc. Carburetor Air Inlet Filter
appliance Pure Air, Inc. Carburetor Air Inlet Filter Airworthiness Directives; PURE-AIR, INC.: Applies to all Aircraft using the Pure-Air, Inc. Carburetor Air Inlet Filter

Unsafe Condition

The Pure-Air, Inc. carburetor air inlet filter foam elements can degrade or become contaminated, leading to restricted airflow or engine malfunction.

AI-generated summary from the source AD text. Verify against the official source before acting.

Required Actions

Remove foam elements exceeding 100 hours time in service or one year, install screen (PN M-117/Large or PN M-118/Small) on filter box. Replace elements every 100 hours or 12 months, or when 50% covered with foreign material. Install decal indicating replacement schedule.

AI-generated summary from the source AD text. Verify against the official source before acting.

Compliance Time

Within 60 days from the effective date of this AD, unless already accomplished.

AI-generated summary from the source AD text. Verify against the official source before acting.

Affected Aircraft

All aircraft using Pure-Air, Inc. Carburetor Air Inlet Filter installed per STC SA69NW.

AI-generated summary from the source AD text. Verify against the official source before acting.

Federal Register Abstract

Carburetor Air Inlet Filter

Applicability Source Text

Show captured applicability text from the source AD
AD Final Rules - DRS_80-08-14.html
Copy URL
Print/Save as PDF
Document Versions
 Feedback
Details
AD Number:
80-08-14
Document Type:
AD Final Rules
Docket Number:
Unknown
Subject Heading:
Airworthiness Directives; PURE-AIR, INC.: Applies to all Aircraft using the Pure-Air, Inc. Carbure...Show more
Subject:
Carburetor Air Inlet Filter
Status:
Current
Citation:
This information is not available.
Citation Publish Date:
Effective Date:
04/22/1980
Make:
Pure Air, Inc.
Model:
Carburetor Air Inlet Filter
Product Type:
Appliance
Product Subtype:
Affected AD:
Superseded AD:
Affected By:
Superseded By:
Service/Office:
Office of Primary Responsibility:
CFR Part Reference:
Part 39
Comments:
AIRWORTHINESS DIRECTIVES FINAL RULES: 80-08-14
CITATION:   This information is not available.

PAGE NUMBER:  

DOCKET NUMBER:   Unknown

AMENDMENT:   39-3745

AD NUMBER:   80-08-14

SUBJECT HEADING:   Airworthiness Directives; PURE-AIR, INC.: Applies to all Aircraft using the Pure-Air, Inc. Carburetor Air Inlet Filter

ACTION:  

SUMMARY:  

DATES:   Effective April 22, 1980.

ADDRESSES:  

FOR FURTHER INFORMATION CONTACT:  

SUPPLEMENTARY INFORMATION:  

REGULATORY TEXT:  
80-08-14 PURE-AIR, INC.: Amendment 39-3745. Applies to all aircraft using the Pure-Air, Inc. carburetor air inlet filter installed per STC SA69NW.

Compliance is required as indicated.

A. Within 60 days from the effective date of this AD, unless already accomplished.

1. Remove Pure-Air filter foam elements which have been installed for more than 100 hours time in service or one year, whichever occurs first, and install screen (PN M-117 Large or PN M-118 Small) on the downstream inside surface of the filter box (PN M-102 Large or PN M-101 Small) by means of the filter attach bolts.

2. Replace each Pure-Air filter element which has accumulated either 100 hours or one year in service with a new filter element.

B. Replace the foam filter element:

1. Every 100 hours time in service or 12 calendar months, whichever comes first.

2. Any time the filter element becomes 50% covered with any foreign material.

C. Install the new Pure-Air supplies decal, which reflects the above replacement times, in plain view on the upper right hand outside surface of the filter box.

This amendment becomes effective April 22, 1980.

FOOTER:

Document Text

Show stored source text (verify against official source)
AD Final Rules - DRS_80-08-14.html
Copy URL
Print/Save as PDF
Document Versions
 Feedback
Details
AD Number:
80-08-14
Document Type:
AD Final Rules
Docket Number:
Unknown
Subject Heading:
Airworthiness Directives; PURE-AIR, INC.: Applies to all Aircraft using the Pure-Air, Inc. Carbure...Show more
Subject:
Carburetor Air Inlet Filter
Status:
Current
Citation:
This information is not available.
Citation Publish Date:
Effective Date:
04/22/1980
Make:
Pure Air, Inc.
Model:
Carburetor Air Inlet Filter
Product Type:
Appliance
Product Subtype:
Affected AD:
Superseded AD:
Affected By:
Superseded By:
Service/Office:
Office of Primary Responsibility:
CFR Part Reference:
Part 39
Comments:
AIRWORTHINESS DIRECTIVES FINAL RULES: 80-08-14
CITATION:   This information is not available.

PAGE NUMBER:  

DOCKET NUMBER:   Unknown

AMENDMENT:   39-3745

AD NUMBER:   80-08-14

SUBJECT HEADING:   Airworthiness Directives; PURE-AIR, INC.: Applies to all Aircraft using the Pure-Air, Inc. Carburetor Air Inlet Filter

ACTION:  

SUMMARY:  

DATES:   Effective April 22, 1980.

ADDRESSES:  

FOR FURTHER INFORMATION CONTACT:  

SUPPLEMENTARY INFORMATION:  

REGULATORY TEXT:  
80-08-14 PURE-AIR, INC.: Amendment 39-3745. Applies to all aircraft using the Pure-Air, Inc. carburetor air inlet filter installed per STC SA69NW.

Compliance is required as indicated.

A. Within 60 days from the effective date of this AD, unless already accomplished.

1. Remove Pure-Air filter foam elements which have been installed for more than 100 hours time in service or one year, whichever occurs first, and install screen (PN M-117 Large or PN M-118 Small) on the downstream inside surface of the filter box (PN M-102 Large or PN M-101 Small) by means of the filter attach bolts.

2. Replace each Pure-Air filter element which has accumulated either 100 hours or one year in service with a new filter element.

B. Replace the foam filter element:

1. Every 100 hours time in service or 12 calendar months, whichever comes first.

2. Any time the filter element becomes 50% covered with any foreign material.

C. Install the new Pure-Air supplies decal, which reflects the above replacement times, in plain view on the upper right hand outside surface of the filter box.

This amendment becomes effective April 22, 1980.

FOOTER:

Source: Official FAA Source ↗

Retrieved: Apr 8, 2026

Rights: U.S. Government Public Domain

This site is not affiliated with or endorsed by the FAA. Always verify with official sources.