AD 80-05-04

AD Final Rules - DRS_80-05-04.html
Copy URL
Print/Save as PDF
Document Versions
 Feedback
Details
AD Number:
80-05-04
Document Type:
AD Final Rules
Docket Number:
Unknown
Subject Heading:
Airworthiness Directives; EON CORPORATION: Applies to EON Model E2900 and E8000 Seat Belts and Harnesses
Subject:
Seat Belts and Harnesses
Status:
Current
Citation:
This information is not available.
Citation Publish Date:
Effective Date:
03/10/1980
Make:
EON Corporation
Model:
Seat Belts and Harnesses
Product Type:
Appliance
Product Subtype:
Affected AD:
Superseded AD:
Affected By:
Superseded By:
Service/Office:
Office of Primary Responsibility:
CFR Part Reference:
Part 39
Comments:
AIRWORTHINESS DIRECTIVES FINAL RULES: 80-05-04
CITATION:   This information is not available.

PAGE NUMBER:  

DOCKET NUMBER:   Unknown

AMENDMENT:   39-3706

AD NUMBER:   80-05-04

SUBJECT HEADING:   Airworthiness Directives; EON CORPORATION: Applies to EON Model E2900 and E8000 Seat Belts and Harnesses


ACTION:  

SUMMARY:  

DATES:   Effective March 10, 1980.

ADDRESSES:  

FOR FURTHER INFORMATION CONTACT:  

SUPPLEMENTARY INFORMATION:  

REGULATORY TEXT:  
80-05-04 EON CORPORATION: Amendment 39-3706. Applies to EON Model E2900 and E8000 Seat Belts and Harnesses. Compliance required within thirty (30) days from the effective date of this AD.

To prevent inadvertent opening and/or false latching of the seat belt/harness assembly, accomplish the following:

(a) If installed, remove bullet head shaped latch depicted below in plan view as Figure 1 and replace with square shaped latch of Figure 2 or other FAA approved, serviceable latch.



(b) If installed, remove buckle with open-ended cover depicted below in Figure 3 and replace with an E8000 buckle with cover depicted in Figure 4 or other FAA approved, serviceable buckle.

NOTE: EON Corporation Service Bulletin No. 1 dated January 22, 1980, refers to this subject.



(c) Alternative inspections, modifications or other actions which provide an equivalent level of safety may be used when approved by the Chief, Aircraft Engineering Division, FAA Western Region.

This amendment becomes effective March 10, 1980.

FOOTER: