AD 76-22-05

AD Final Rules - DRS_76-22-05.html
Copy URL
Print/Save as PDF
Document Versions
 Feedback
Details
AD Number:
76-22-05
Document Type:
AD Final Rules
Docket Number:
Unknown
Subject Heading:
Airworthiness Directives; MCDONNELL DOUGLAS DC-10-10, -10F, -30, -30F, and -40 Series Airplanes
Subject:
Attendant's Seat Belts
Status:
Current
Citation:
This information is not available.
Citation Publish Date:
Effective Date:
12/10/1976
Make:
The Boeing Company
Model:
DC-10-10 | DC-10-10F | DC-10-30 | DC-10-30F (KC-10A, KDC-10) | DC-10-40
Product Type:
Aircraft
Product Subtype:
Large Airplane
Affected AD:
Superseded AD:
Affected By:
Superseded By:
Service/Office:
Office of Primary Responsibility:
CFR Part Reference:
Part 39
Comments:
Updated RGL applicability to match AD applicability; CAR C-11-185
AIRWORTHINESS DIRECTIVES FINAL RULES: 76-22-05
CITATION:   This information is not available.

PAGE NUMBER:  

DOCKET NUMBER:   Unknown

AMENDMENT:   39-2754

AD NUMBER:   76-22-05

SUBJECT HEADING:   Airworthiness Directives; MCDONNELL DOUGLAS DC-10-10, -10F, -30, -30F, and -40 Series Airplanes

ACTION:  

SUMMARY:  

DATES:   Effective December 10, 1976.

ADDRESSES:  

FOR FURTHER INFORMATION CONTACT:  

SUPPLEMENTARY INFORMATION:  

REGULATORY TEXT:  
76-22-05 MCDONNELL DOUGLAS CORPORATION: Amendment 39-2754. Applies to McDonnell Douglas Corporation model DC-10-10, -10F, -30, -30F, and -40 series airplanes, certificated in all categories, equipped with American Safety Flight Systems, Inc. seat belt model 443440 installed on aft facing flight attendants seats.

Compliance required within the next 600 hours' time in service after the effective date of this AD, unless already accomplished.

To prevent possible unsafe buckle position of flight attendants seat belts, accomplish the following:

(a) Install a placard, which reads "DO NOT OCCUPY", on those flight attendant seats in the passenger cabin equipped with American Safety Flight System, Inc., seat belt model number 443440 until the seat belt installation is modified or replaced in a manner approved by the Chief, Aircraft Engineering Division, FAA Western Region. The seats prohibited from use must be secured in normally stowed position or removed.

(b) Replace American Safety Flight System, Inc. seat belt model number 443440 installed on lower lobe galley seats with ordinary adjustable seat belts without retractors in accordance with normal maintenance practices. Alternate seat belt installations may be approved by the Chief, Aircraft Engineering Division, Federal Aviation Administration, Western Region.

This amendment becomes effective December 10, 1976.


FOOTER: