AD 75-16-01

AD Final Rules - DRS_75-16-01.html
Copy URL
Print/Save as PDF
Document Versions
 Feedback
Details
AD Number:
75-16-01
Document Type:
AD Final Rules
Docket Number:
Unknown
Subject Heading:
Airworthiness Directives; CESSNA Models 180, 182, 15, A185, U206, TU206, P206, TP260, T207, 207, And...Show more
Subject:
Wing Fuel Tanks
Status:
Current
Citation:
This information is not available.
Citation Publish Date:
Effective Date:
07/30/1975
Make:
Cessna Aircraft Company
Model:
180 | 180A | 180B | 180C | 180D | 180E | 180F | 180G | 180H | 180J | 180K | 182 | 182A | 182B | 182C...Show more
Product Type:
Aircraft
Product Subtype:
Small Airplane
Affected AD:
Superseded AD:
Affected By:
Superseded By:
Service/Office:
Office of Primary Responsibility:
CFR Part Reference:
Part 39
Comments:
AIRWORTHINESS DIRECTIVES FINAL RULES: 75-16-01
CITATION:   This information is not available.

PAGE NUMBER:  

DOCKET NUMBER:   Unknown

AMENDMENT:   39-2273

AD NUMBER:   75-16-01

SUBJECT HEADING:   Airworthiness Directives; CESSNA Models 180, 182, 15, A185, U206, TU206, P206, TP260, T207, 207, And A188 Series Airplanes

ACTION:  

SUMMARY:  

DATES:   Effective July 30, 1975.

ADDRESSES:  

FOR FURTHER INFORMATION CONTACT:  

SUPPLEMENTARY INFORMATION:  

REGULATORY TEXT:  
75-16-01 CESSNA: Amendment 39-2273. Applies to all Models 180, 182, 185, A185, U206, TU206, P206, TP206, T207 and 207 series airplanes and Model A188 series airplanes with wing fuel tanks regardless of airworthiness category.

Compliance: Required as indicated, unless already accomplished.

To preclude inadvertent fuel exhaustion due to incorrect fuel placarded capacities, within the next 100 hours' time in service after the effective date of this AD:

A) Replace the existing fuel system placards with those specified on the following chart:


	
PLACARD PART NUMBER

AIRCRAFT MODEL
(1973 thru 1975)	FUEL
CONFIGURATION	SELECTOR VALVE	WING FILLER OPENING
			
180J
S/N 52364 thru 52554 Landplane	Standard Range
Long Range	S1286-6
S1286-5	0705023-8
0705023-9
			
Floatplane Option	Standard Range
Long Range	S1286-6
S1286-5	0705023-8
0705023-9
(Otbd.)
0705023-13
(Inbd.)
			
182P
S/N 62251 thru 63590	Standard Range
Long Range	0705048-25
0705048-26	0705023-8
0705023-9
			
185F
S/N 02263 thru 02653
Landplane & AgCarryall	*Standard Range

Standard Range


Long Range	0705019-7
(Fuel Valve)
0705019-5
(Fuel Valve)
0716113-3
0705019-6
(Fuel Valve)
0716113-4	0705023-10

0705023-10


0705023-12
			
Floatplane Option	Standard Range


Long Range	0705019-5
(Fuel Valve)
0716113-3
0705019-6
(Fuel Valve)
0716113-4	0705023-10


0705023-11
(Inbd.)
0705023-12
(Otbd.)
			
A188B
S/N 01347 thru 02027**	*Wing Cell Only	1605023-5
(Fuel Valve)	0705023-14
			
U206F & TU206F
S/N 02127 thru 02675
Landplane	Standard Range
Long Range	0705048-21
0705048-22	0705023-10
0705023-12
			
Floatplane Option	Standard Range
Long Range	0705048-21
0705048-22	0705023-10
0705023-11
(Inbd.)
0705023-12
(Otbd.)
			
207 & T207
S/N 00226 thru 00283	Standard Range
Long Range	0705048-23
0705048-24	0705023-10
0705023-12

*With ON-OFF Fuel Valve Only
** Also applies to aircraft incorporating suffix "T" in S/Ns.

NOTE: Cessna Aircraft Company provides instructions in Service Letter SE75-7 for revision of the pages of the owner's manuals affected by the reduced fuel system capacity. To avoid discrepancies between these manuals and the aircraft placards, the manuals should be revised in accordance with Cessna's instructions.

B) On all models of aircraft manufactured in and prior to 1973 review the aircraft records to determine if new fuel bladder(s) have been installed since June 1, 1973, and if so, comply with Paragraph A of this AD unless it is established that the fuel cells installed were manufactured prior to June 1, 1973, and this fact is entered in the permanent aircraft records.

NOTE: The owner may review the aircraft records and if he determines that new fuel bladder(s) have not been installed since June 1, 1973, may enter such information in the aircraft records.

C) Alternate methods of compliance with this AD must be approved by the Chief, Engineering and Manufacturing Branch, FAA, Central Region.

This amendment becomes effective July 30, 1975.

FOOTER: