AD 74-18-08
Applicability
| Type | Manufacturer | Model | Details |
|---|---|---|---|
| engine | Continental Motors | TSIO-360-C | TELEDYNE CONTINENTAL MOTORS Model TSIO-360-C and TSIO-360-D Engines |
| engine | Continental Motors | TSIO-360-D | TELEDYNE CONTINENTAL MOTORS Model TSIO-360-C and TSIO-360-D Engines |
Unsafe Condition
Fuel nozzle line leakage or breakage due to chafing, kinks, sharp bends, or fuel stains at the ferrules.
AI-generated summary from the source AD text. Verify against the official source before acting.
Required Actions
Inspect fuel nozzle lines for chafing, kinks, sharp bends, or fuel stains at the ferrules. Replace lines with airworthy components if discrepancies are found. Install new clamps and brackets per Teledyne Continental Service Bulletin M74-5A or equivalent approved procedure.
AI-generated summary from the source AD text. Verify against the official source before acting.
Compliance Time
within the next 25 hours after the effective date of this AD
AI-generated summary from the source AD text. Verify against the official source before acting.
Affected Aircraft
Teledyne Continental Motors Model TSIO-360-C and TSIO-360-D engines
AI-generated summary from the source AD text. Verify against the official source before acting.
Federal Register Abstract
Fuel Nozzle Lines
Applicability Source Text
Show captured applicability text from the source AD
AD Final Rules - DRS_74-18-08.html Copy URL Print/Save as PDF Document Versions Feedback Details AD Number: 74-18-08 Document Type: AD Final Rules Docket Number: Unknown Subject Heading: TELEDYNE CONTINENTAL MOTORS Model TSIO-360-C and TSIO-360-D Engines Subject: Fuel Nozzle Lines Status: Current Citation: This information is not available. Citation Publish Date: Effective Date: 08/30/1974 Make: Continental Motors Model: TSIO-360-C | TSIO-360-D Product Type: Engine Product Subtype: Affected AD: Superseded AD: Affected By: Superseded By: Service/Office: Office of Primary Responsibility: CFR Part Reference: Part 39 Comments: Updated RGL applicability to match AD applicability; CAR C-11-185 AIRWORTHINESS DIRECTIVES FINAL RULES: 74-18-08 CITATION: This information is not available. PAGE NUMBER: DOCKET NUMBER: Unknown AMENDMENT: 39-1935 AD NUMBER: 74-18-08 SUBJECT HEADING: TELEDYNE CONTINENTAL MOTORS Model TSIO-360-C and TSIO-360-D Engines ACTION: SUMMARY: DATES: Effective August 30, 1974. ADDRESSES: FOR FURTHER INFORMATION CONTACT: SUPPLEMENTARY INFORMATION: REGULATORY TEXT: 74-18-08 TELEDYNE CONTINENTAL MOTORS: Amendment 39-1935. Applies to Teledyne Continental Model TSIO-360-C and TSIO-360-D engines. Compliance required within the next 25 hours after the effective date of this AD, unless already accomplished. To prevent fuel nozzle line leakage or breakage accomplish the following: 1. Carefully inspect the fuel nozzle lines for: a. Chafing - where lines have rubbed together, rubbed other engines parts or have been rubbed by other items. b. Kinks or sharp bends c. Fuel stains at the ferrules (lines must be replaced with airworthy components if any of the above discrepancies are found) 2. Install new clamps and brackets to prevent further chafing in accordance with Teledyne Continental Service Bulletin M74-5A or equivalent procedure approved by the Chief, Engineering and Manufacturing Branch, FAA Southern Region. This amendment becomes effective August 30, 1974. FOOTER:
Document Text
Show stored source text (verify against official source)
AD Final Rules - DRS_74-18-08.html Copy URL Print/Save as PDF Document Versions Feedback Details AD Number: 74-18-08 Document Type: AD Final Rules Docket Number: Unknown Subject Heading: TELEDYNE CONTINENTAL MOTORS Model TSIO-360-C and TSIO-360-D Engines Subject: Fuel Nozzle Lines Status: Current Citation: This information is not available. Citation Publish Date: Effective Date: 08/30/1974 Make: Continental Motors Model: TSIO-360-C | TSIO-360-D Product Type: Engine Product Subtype: Affected AD: Superseded AD: Affected By: Superseded By: Service/Office: Office of Primary Responsibility: CFR Part Reference: Part 39 Comments: Updated RGL applicability to match AD applicability; CAR C-11-185 AIRWORTHINESS DIRECTIVES FINAL RULES: 74-18-08 CITATION: This information is not available. PAGE NUMBER: DOCKET NUMBER: Unknown AMENDMENT: 39-1935 AD NUMBER: 74-18-08 SUBJECT HEADING: TELEDYNE CONTINENTAL MOTORS Model TSIO-360-C and TSIO-360-D Engines ACTION: SUMMARY: DATES: Effective August 30, 1974. ADDRESSES: FOR FURTHER INFORMATION CONTACT: SUPPLEMENTARY INFORMATION: REGULATORY TEXT: 74-18-08 TELEDYNE CONTINENTAL MOTORS: Amendment 39-1935. Applies to Teledyne Continental Model TSIO-360-C and TSIO-360-D engines. Compliance required within the next 25 hours after the effective date of this AD, unless already accomplished. To prevent fuel nozzle line leakage or breakage accomplish the following: 1. Carefully inspect the fuel nozzle lines for: a. Chafing - where lines have rubbed together, rubbed other engines parts or have been rubbed by other items. b. Kinks or sharp bends c. Fuel stains at the ferrules (lines must be replaced with airworthy components if any of the above discrepancies are found) 2. Install new clamps and brackets to prevent further chafing in accordance with Teledyne Continental Service Bulletin M74-5A or equivalent procedure approved by the Chief, Engineering and Manufacturing Branch, FAA Southern Region. This amendment becomes effective August 30, 1974. FOOTER:
Source: Official FAA Source ↗
Retrieved: Apr 8, 2026
Rights: U.S. Government Public Domain
This site is not affiliated with or endorsed by the FAA. Always verify with official sources.
Related Airworthiness Directives
2012-03-06
final ruleAirworthiness Directives; Superior Air Parts, Lycoming Engines (Formerly Textron Lycoming), and Continental Motors, Inc., Fuel-Injected Reciprocating Engines
Unsafe Condition: Failed AFS fuel servo diaphragms, part numbers AV2541801 or AV2541803, could lead to an in-flight engine shutdown and damage to the airplane.
2011-26-07
final ruleAirworthiness Directives; Teledyne Continental Motors (TCM) and Rolls-Royce Motors Ltd. (R-RM) Series Reciprocating Engines
Unsafe Condition: Migration of the magneto impulse coupling stop pin out of the magneto frame and into the gear train of the engine, potentially leading to engine failure and loss of control of the airplane.
2010-11-04
final ruleAirworthiness Directives; Teledyne Continental Motors (TCM) 240, 346, 360, 470, 520, and 550 Series and Rolls-Royce Motors, Ltd. (R-RM) IO-240-A Reciprocating Engines
Unsafe Condition: Rapid wear on the face of hydraulic lifters, part numbers 657913, 657915, and 657916, which can result in loss of engine power and loss of control of the airplane.
2010-07-08
final ruleAirworthiness Directives; Kelly Aerospace Energy Systems, LLC Rebuilt Turbochargers
Unsafe Condition: Separation or seizure of the turbocharger turbine due to a rough surface finish on the turbine wheel shaft exceeding allowable limits, which disrupts the hydrodynamic layer of oil between the shaft...