AD 74-09-05

AD Final Rules - DRS_74-09-05.html
Copy URL
Print/Save as PDF
Document Versions
 Feedback
Details
AD Number:
74-09-05
Document Type:
AD Final Rules
Docket Number:
Unknown
Subject Heading:
BOEING Models 707/720/727/737 Series Airplanes
Subject:
Emergency Overwing Exits
Status:
Current
Citation:
This information is not available.
Citation Publish Date:
Effective Date:
Make:
The Boeing Company
Model:
707-100 Long Body | 707-100B Long Body | 707-100B Short Body | 707-200 | 707-300 Series | 707-300B S...Show more
Product Type:
Aircraft
Product Subtype:
Large Airplane
Affected AD:
Superseded AD:
Affected By:
Superseded By:
Service/Office:
Office of Primary Responsibility:
CFR Part Reference:
Part 39
Comments:
AIRWORTHINESS DIRECTIVES FINAL RULES: 74-09-05
CITATION:   This information is not available.

PAGE NUMBER:  

DOCKET NUMBER:   Unknown

AMENDMENT:   39-1824

AD NUMBER:   74-09-05

SUBJECT HEADING:   BOEING Models 707/720/727/737 Series Airplanes

ACTION:  

SUMMARY:  

DATES:  

ADDRESSES:  

FOR FURTHER INFORMATION CONTACT:  

SUPPLEMENTARY INFORMATION:  

REGULATORY TEXT:  
74-09-05 BOEING: Amendment 39-1824. Applies to Boeing Models 707/720/727/737 series airplanes certificated in all categories.
Compliance required as indicated below, unless already accomplished.
To prevent possible interference with overwing emergency exit opening, accomplish the following:
a. Within 200 hours time in service after effective date of this AD, inspect screws in the upper sidewall panel to hatch frame of emergency overwing exits for secure conditions. If screws are loose or backed-out install star washers, or, as terminating action, nutplates in accordance with paragraph c of this AD.
b. Within 1000 hours time in service after effective date of this AD, unless already accomplished, install nutplates in accordance with paragraph c of this AD.
c. Install star washers and nutplates in accordance with the following Boeing Service Bulletins, as applicable, or later FAA approved revisions, or equivalent instructions approved by the Chief, Engineering and Manufacturing Branch, FAA, Northwest Region:

MODELS - 707/720; SERVICE BULLETIN NUMBER - 3153
MODEL - 727; SERVICE BULLETIN NUMBER - 727-25-214
MODEL - 737; SERVICE BULLETIN NUMBER - 737-25-1101

The manufacturer's specifications and procedures identified and described in this directive are incorporated herewith and made a part hereof, pursuant to 5 U.S.C. 552(a)(i). All persons affected by this directive who have not already received these documents may obtain copies upon request to The Boeing Company, P. O. Box 3707, Seattle, Washington 98124. These documents may also be examined at FAA Northwest Region, Boeing Field, Seattle, Washington.

This amendment becomes effective upon publication.

FOOTER: