AD 74-09-03

AD Final Rules - DRS_74-09-03.html
Copy URL
Print/Save as PDF
Document Versions
 Feedback
Details
AD Number:
74-09-03
Document Type:
AD Final Rules
Docket Number:
Unknown
Subject Heading:
AVCO LYCOMING T5309C, T5311A and T5311B Engines.
Subject:
Compressor Rotor Discs
Status:
Current
Citation:
This information is not available.
Citation Publish Date:
Effective Date:
05/02/1974
Make:
Honeywell International Inc.
Model:
T5309C | T5311A | T5311B
Product Type:
Engine
Product Subtype:
Affected AD:
Superseded AD:
Affected By:
Superseded By:
Service/Office:
Office of Primary Responsibility:
CFR Part Reference:
Part 39
Comments:
AIRWORTHINESS DIRECTIVES FINAL RULES: 74-09-03
CITATION:   This information is not available.

PAGE NUMBER:  

DOCKET NUMBER:   Unknown

AMENDMENT:   39-1823

AD NUMBER:   74-09-03

SUBJECT HEADING:   AVCO LYCOMING T5309C, T5311A and T5311B Engines.

ACTION:  

SUMMARY:  

DATES:   Effective May 2, 1974.

ADDRESSES:  

FOR FURTHER INFORMATION CONTACT:  

SUPPLEMENTARY INFORMATION:  

REGULATORY TEXT:   74-09-03 AVCO LYCOMING: Amendment 39-1823. Applies to all Avco Lycoming T5309C, T5311A and T5311B turboshaft engines.
Compliance required, unless already accomplished, prior to the accumulation of 100 hours in service after the effective date of this AD.
To prevent possible compressor disc or impeller assembly failures leading to partial or complete loss of engine power, remove and replace the second, third, fourth, and fifth stage compressor rotor discs and centrifugal impeller assemblies in accordance with the table below.
COMPONENT - 2nd Stage Compressor Rotor Disc; REMOVE P/N - 1-100-239-01; INSTALL P/N - 1- 100-239-04 or later FAA approved P/N
COMPONENT - 3rd Stage Compressor Rotor Disc; REMOVE P/N - 1-100-242-01 or 1-100-242-06; INSTALL P/N - 1-100-242-09 or later FAA approved P/N
COMPONENT- 4th Stage Compressor Rotor Disc; REMOVE P/N - 1-100-244-01 or 1-100-244-02; or 1-100-244-04 or 1-100-244-06; INSTALL P/N - 1-100-244-08 or later FAA approved P/N
COMPONENT - 5th Stage Compressor Rotor Disc; REMOVE P/N - 1-100-417-01 or 1-100-417-02; INSTALL P/N - 1-100-417-05 or later FAA approved P/N
COMPONENT - Centrifugal Impeller Assembly; REMOVE P/N - 1-100-440-04 or 1-100-440-07; INSTALL P/N - 1-100-440-07; Rev. B or later FAA approved P/N
Upon submission of substantiating data through an FAA Maintenance Inspector, the Chief, Engineering and Manufacturing Branch, FAA, New England Region, may adjust the compliance time.
NOTE: (Avco Lycoming Service Bulletin Number 0033 pertains to this subject.)
This amendment becomes effective May 2, 1974.

FOOTER: