AD 71-25-06

final rule

BOEING Model 707/720 Airplanes

AD Number
71-25-06
Status
final_rule
Effective Date
Product Category
aircraft
Docket
Unknown
FR Citation
This information is not available.
Technical illustration of a riveted aircraft structural panel and frame
Problem area Airframe structure

Applicability

TypeManufacturerModelDetails
aircraft The Boeing Company 707-100 Long Body BOEING Model 707/720 Airplanes
aircraft The Boeing Company 707-100B Long Body BOEING Model 707/720 Airplanes
aircraft The Boeing Company 707-100B Short Body BOEING Model 707/720 Airplanes
aircraft The Boeing Company 707-200 BOEING Model 707/720 Airplanes
aircraft The Boeing Company 707-300 Series BOEING Model 707/720 Airplanes
aircraft The Boeing Company 707-300B Series BOEING Model 707/720 Airplanes
aircraft The Boeing Company 707-300C Series BOEING Model 707/720 Airplanes
aircraft The Boeing Company 707-400 Series BOEING Model 707/720 Airplanes
aircraft The Boeing Company 720 Series BOEING Model 707/720 Airplanes
aircraft The Boeing Company 720B Series BOEING Model 707/720 Airplanes

Unsafe Condition

Water accumulation forward of the station 360 bulkhead could block or be absent drains, leading to potential structural damage.

AI-generated summary from the source AD text. Verify against the official source before acting.

Required Actions

Inspect the airplane per Boeing Service Bulletin 3027 or later FAA-approved revisions. If drains are blocked or absent, modify the station 360 bulkhead, bulkhead blanket, and floor mat as described. Alternatively, perform an equivalent inspection and modification approved by the FAA.

AI-generated summary from the source AD text. Verify against the official source before acting.

Compliance Time

within the next 300 hours time in service after effective date of this AD

AI-generated summary from the source AD text. Verify against the official source before acting.

Affected Aircraft

Boeing Model 707/720 airplanes certified in all categories

AI-generated summary from the source AD text. Verify against the official source before acting.

Federal Register Abstract

Water At Station 360 Bulkhead

Applicability Source Text

Show captured applicability text from the source AD
AD Final Rules - DRS_71-25-06.html
Copy URL
Print/Save as PDF
Document Versions
 Feedback
Details
AD Number:
71-25-06
Document Type:
AD Final Rules
Docket Number:
Unknown
Subject Heading:
BOEING Model 707/720 Airplanes
Subject:
Water At Station 360 Bulkhead
Status:
Current
Citation:
This information is not available.
Citation Publish Date:
Effective Date:
12/13/1971
Make:
The Boeing Company
Model:
707-100 Long Body | 707-100B Long Body | 707-100B Short Body | 707-200 | 707-300 Series | 707-300B S...Show more
Product Type:
Aircraft
Product Subtype:
Large Airplane
Affected AD:
Superseded AD:
Affected By:
Superseded By:
Service/Office:
Office of Primary Responsibility:
CFR Part Reference:
Part 39
Comments:
AIRWORTHINESS DIRECTIVES FINAL RULES: 71-25-06
CITATION:   This information is not available.

PAGE NUMBER:  

DOCKET NUMBER:   Unknown

AMENDMENT:   39-1357

AD NUMBER:   71-25-06

SUBJECT HEADING:   BOEING Model 707/720 Airplanes

ACTION:  

SUMMARY:  

DATES:   Effective December 13, 1971.

ADDRESSES:  

FOR FURTHER INFORMATION CONTACT:  

SUPPLEMENTARY INFORMATION:  

REGULATORY TEXT:  
71-25-06 BOEING: Amdt. 39-1357. Applies to Model 707/720 airplanes certified in all categories.
Compliance required within the next 300 hours time in service after effective date of this AD, unless already accomplished.
To assure that water will not accumulate forward of the station 360 bulkhead on all Boeing Model 707/720 airplanes, accomplish one of the following:
(1) Inspect the airplane per Boeing Service Bulletin 3027, dated 23 November 1971, or later FAA approved revisions. If the station 360 bulkhead drains are blocked or do not exist modify the station 360 bulkhead, bulkhead blanket and floor mat as described in the above service bulletin to provide the required drains.
(2) Perform an equivalent inspection and (if required as a result of the inspection finding) modification approved by the Chief, Aircraft Engineering Division, FAA, Western Region.
This amendment becomes effective December 13, 1971.

FOOTER:

Document Text

Show stored source text (verify against official source)
AD Final Rules - DRS_71-25-06.html
Copy URL
Print/Save as PDF
Document Versions
 Feedback
Details
AD Number:
71-25-06
Document Type:
AD Final Rules
Docket Number:
Unknown
Subject Heading:
BOEING Model 707/720 Airplanes
Subject:
Water At Station 360 Bulkhead
Status:
Current
Citation:
This information is not available.
Citation Publish Date:
Effective Date:
12/13/1971
Make:
The Boeing Company
Model:
707-100 Long Body | 707-100B Long Body | 707-100B Short Body | 707-200 | 707-300 Series | 707-300B S...Show more
Product Type:
Aircraft
Product Subtype:
Large Airplane
Affected AD:
Superseded AD:
Affected By:
Superseded By:
Service/Office:
Office of Primary Responsibility:
CFR Part Reference:
Part 39
Comments:
AIRWORTHINESS DIRECTIVES FINAL RULES: 71-25-06
CITATION:   This information is not available.

PAGE NUMBER:  

DOCKET NUMBER:   Unknown

AMENDMENT:   39-1357

AD NUMBER:   71-25-06

SUBJECT HEADING:   BOEING Model 707/720 Airplanes

ACTION:  

SUMMARY:  

DATES:   Effective December 13, 1971.

ADDRESSES:  

FOR FURTHER INFORMATION CONTACT:  

SUPPLEMENTARY INFORMATION:  

REGULATORY TEXT:  
71-25-06 BOEING: Amdt. 39-1357. Applies to Model 707/720 airplanes certified in all categories.
Compliance required within the next 300 hours time in service after effective date of this AD, unless already accomplished.
To assure that water will not accumulate forward of the station 360 bulkhead on all Boeing Model 707/720 airplanes, accomplish one of the following:
(1) Inspect the airplane per Boeing Service Bulletin 3027, dated 23 November 1971, or later FAA approved revisions. If the station 360 bulkhead drains are blocked or do not exist modify the station 360 bulkhead, bulkhead blanket and floor mat as described in the above service bulletin to provide the required drains.
(2) Perform an equivalent inspection and (if required as a result of the inspection finding) modification approved by the Chief, Aircraft Engineering Division, FAA, Western Region.
This amendment becomes effective December 13, 1971.

FOOTER:

Source: Official FAA Source ↗

Retrieved: Apr 8, 2026

Rights: U.S. Government Public Domain

This site is not affiliated with or endorsed by the FAA. Always verify with official sources.