AD 71-14-03
Applicability
| Type | Manufacturer | Model | Details |
|---|---|---|---|
| aircraft | International Inflatables Company | Regulator | Airworthiness Directives; INTERNATIONAL INFLATABLES COMPANY: Applies to Aircraft Incorporating International Inflatables Company Regulator, P/N 68240 |
| appliance | International Inflatables Company | Regulator | Airworthiness Directives; INTERNATIONAL INFLATABLES COMPANY: Applies to Aircraft Incorporating International Inflatables Company Regulator, P/N 68240 |
Unsafe Condition
Unwanted bottle and regulator separation of P/N 68240 due to corrosion evidence.
AI-generated summary from the source AD text. Verify against the official source before acting.
Required Actions
Inspect the regulator per Service Bulletin No. 33-102 or equivalent procedure within 30 days after the effective date and every 60 days thereafter. Replace the regulator prior to further flight if corrosion is found.
AI-generated summary from the source AD text. Verify against the official source before acting.
Compliance Time
Within the next 30 days after the effective date of this A.D., unless already accomplished within the last 30 days, and thereafter at intervals not to exceed 60 days from the last inspection.
AI-generated summary from the source AD text. Verify against the official source before acting.
Affected Aircraft
Aircraft incorporating International Inflatables Company Regulator, P/N 68240.
AI-generated summary from the source AD text. Verify against the official source before acting.
Federal Register Abstract
Regulator
Applicability Source Text
Show captured applicability text from the source AD
AD Final Rules - DRS_71-14-03.html Copy URL Print/Save as PDF Document Versions Feedback Details AD Number: 71-14-03 Document Type: AD Final Rules Docket Number: Unknown Subject Heading: Airworthiness Directives; INTERNATIONAL INFLATABLES COMPANY: Applies to Aircraft Incorporating Int...Show more Subject: Regulator Status: Current Citation: This information is not available. Citation Publish Date: Effective Date: 07/02/1971 Make: International Inflatables Company Model: Regulator Product Type: Appliance Product Subtype: Affected AD: Superseded AD: Affected By: Superseded By: Service/Office: Office of Primary Responsibility: CFR Part Reference: Part 39 Comments: AIRWORTHINESS DIRECTIVES FINAL RULES: 71-14-03 CITATION: This information is not available. PAGE NUMBER: DOCKET NUMBER: Unknown AMENDMENT: 39-1239 AD NUMBER: 71-14-03 SUBJECT HEADING: Airworthiness Directives; INTERNATIONAL INFLATABLES COMPANY: Applies to Aircraft Incorporating International Inflatables Company Regulator, P/N 68240 ACTION: SUMMARY: DATES: Effective July 2, 1971. ADDRESSES: FOR FURTHER INFORMATION CONTACT: SUPPLEMENTARY INFORMATION: REGULATORY TEXT: 71-14-03 INTERNATIONAL INFLATABLES COMPANY: Amdt. 39-1239. Applies to aircraft incorporating International Inflatables Company Regulator, P/N 68240. Compliance required as indicated. To prevent unwanted bottle and regulator separation of P/N 68240, accomplish the following: (a) Within the next 30 days after the effective date of this A.D., unless already accomplished within the last 30 days, and thereafter at intervals not to exceed 60 days from the last inspection, inspect the International Inflatables Company Regulator, P/N 68240, if installed in an aircraft, in accordance with International Inflatables Company Service Bulletin No. 33-102, Volume 1, No. 101, dated June 11, 1971, or later FAA approved revisions, or an equivalent inspection procedure approved by the Chief, Aircraft Engineering Division, FAA Western Region. If there is any evidence of corrosion, replace the regulator prior to further flight with a previously inspected (per this A.D.) and corrosion-free regulator. Do not return any regulator exhibiting evidence of corrosion to service. (b) After the effective date of this AD, and prior to the installation of an International Inflatables Company Regulator, P/N 68240 on an aircraft, inspect that regulator per (a) above. NOTE: An improved regulator is under development. If and when approved by FAA, this AD will be amended to require installation within a prescribed time period. This amendment becomes effective July 2, 1971. FOOTER:
Document Text
Show stored source text (verify against official source)
AD Final Rules - DRS_71-14-03.html Copy URL Print/Save as PDF Document Versions Feedback Details AD Number: 71-14-03 Document Type: AD Final Rules Docket Number: Unknown Subject Heading: Airworthiness Directives; INTERNATIONAL INFLATABLES COMPANY: Applies to Aircraft Incorporating Int...Show more Subject: Regulator Status: Current Citation: This information is not available. Citation Publish Date: Effective Date: 07/02/1971 Make: International Inflatables Company Model: Regulator Product Type: Appliance Product Subtype: Affected AD: Superseded AD: Affected By: Superseded By: Service/Office: Office of Primary Responsibility: CFR Part Reference: Part 39 Comments: AIRWORTHINESS DIRECTIVES FINAL RULES: 71-14-03 CITATION: This information is not available. PAGE NUMBER: DOCKET NUMBER: Unknown AMENDMENT: 39-1239 AD NUMBER: 71-14-03 SUBJECT HEADING: Airworthiness Directives; INTERNATIONAL INFLATABLES COMPANY: Applies to Aircraft Incorporating International Inflatables Company Regulator, P/N 68240 ACTION: SUMMARY: DATES: Effective July 2, 1971. ADDRESSES: FOR FURTHER INFORMATION CONTACT: SUPPLEMENTARY INFORMATION: REGULATORY TEXT: 71-14-03 INTERNATIONAL INFLATABLES COMPANY: Amdt. 39-1239. Applies to aircraft incorporating International Inflatables Company Regulator, P/N 68240. Compliance required as indicated. To prevent unwanted bottle and regulator separation of P/N 68240, accomplish the following: (a) Within the next 30 days after the effective date of this A.D., unless already accomplished within the last 30 days, and thereafter at intervals not to exceed 60 days from the last inspection, inspect the International Inflatables Company Regulator, P/N 68240, if installed in an aircraft, in accordance with International Inflatables Company Service Bulletin No. 33-102, Volume 1, No. 101, dated June 11, 1971, or later FAA approved revisions, or an equivalent inspection procedure approved by the Chief, Aircraft Engineering Division, FAA Western Region. If there is any evidence of corrosion, replace the regulator prior to further flight with a previously inspected (per this A.D.) and corrosion-free regulator. Do not return any regulator exhibiting evidence of corrosion to service. (b) After the effective date of this AD, and prior to the installation of an International Inflatables Company Regulator, P/N 68240 on an aircraft, inspect that regulator per (a) above. NOTE: An improved regulator is under development. If and when approved by FAA, this AD will be amended to require installation within a prescribed time period. This amendment becomes effective July 2, 1971. FOOTER:
Source: Official FAA Source ↗
Retrieved: Apr 8, 2026
Rights: U.S. Government Public Domain
This site is not affiliated with or endorsed by the FAA. Always verify with official sources.