AD 70-19-03
Applicability
| Type | Manufacturer | Model | Details |
|---|---|---|---|
| aircraft | Dornier Luftfahrt GmbH | Do 28 D-1 | Airworthiness Directives; Dornier Ag Model Do-28D-1 Airplanes |
Unsafe Condition
Interference between jumper wires and aileron and flap control systems
AI-generated summary from the source AD text. Verify against the official source before acting.
Required Actions
Install shorter jumper wires, cover them with insulation tubing, and reroute wires in accordance with Dornier Service Bulletin No. 1030-1408 or FAA approved equivalent.
AI-generated summary from the source AD text. Verify against the official source before acting.
Compliance Time
within the next 50 hours' time in service after the effective date of this AD
AI-generated summary from the source AD text. Verify against the official source before acting.
Affected Aircraft
Dornier Luftfahrt GmbH Model Do 28 D-1 airplanes
AI-generated summary from the source AD text. Verify against the official source before acting.
Federal Register Abstract
Jumper Wire Installation
Applicability Source Text
Show captured applicability text from the source AD
AD Final Rules - DRS_70-19-03.html Copy URL Print/Save as PDF Document Versions Feedback Details AD Number: 70-19-03 Document Type: AD Final Rules Docket Number: Unknown Subject Heading: Airworthiness Directives; Dornier Ag Model Do-28D-1 Airplanes Subject: Jumper Wire Installation Status: Current Citation: This information is not available. Citation Publish Date: Effective Date: 09/22/1970 Make: Dornier Luftfahrt GmbH Model: Do 28 D-1 Product Type: Aircraft Product Subtype: Small/Large Airplane Affected AD: Superseded AD: Affected By: Superseded By: Service/Office: Office of Primary Responsibility: CFR Part Reference: Part 39 Comments: AIRWORTHINESS DIRECTIVES FINAL RULES: 70-19-03 CITATION: This information is not available. PAGE NUMBER: DOCKET NUMBER: Unknown AMENDMENT: 39-1080 AD NUMBER: 70-19-03 SUBJECT HEADING: Airworthiness Directives; Dornier Ag Model Do-28D-1 Airplanes ACTION: SUMMARY: DATES: Effective September 22, 1970. ADDRESSES: FOR FURTHER INFORMATION CONTACT: SUPPLEMENTARY INFORMATION: REGULATORY TEXT: 70-19-03 DORNIER AG: Amdt. 39-1080. Applies to Model Do-28D-1 Airplanes. To prevent interference between the jumper wires and the aileron and flap control systems, within the next 50 hours' time in service after the effective date of this AD, unless already accomplished, rework the jumper wire installations located in the right and left wing by installing shorter jumper wires, covering the jumper wires with insulation tubing, and rerouting wires in accordance with Dornier Service Bulletin No. 1030-1408, dated 6 July 1970, or an FAA approved equivalent. This amendment becomes effective September 22, 1970. FOOTER:
Document Text
Show stored source text (verify against official source)
AD Final Rules - DRS_70-19-03.html Copy URL Print/Save as PDF Document Versions Feedback Details AD Number: 70-19-03 Document Type: AD Final Rules Docket Number: Unknown Subject Heading: Airworthiness Directives; Dornier Ag Model Do-28D-1 Airplanes Subject: Jumper Wire Installation Status: Current Citation: This information is not available. Citation Publish Date: Effective Date: 09/22/1970 Make: Dornier Luftfahrt GmbH Model: Do 28 D-1 Product Type: Aircraft Product Subtype: Small/Large Airplane Affected AD: Superseded AD: Affected By: Superseded By: Service/Office: Office of Primary Responsibility: CFR Part Reference: Part 39 Comments: AIRWORTHINESS DIRECTIVES FINAL RULES: 70-19-03 CITATION: This information is not available. PAGE NUMBER: DOCKET NUMBER: Unknown AMENDMENT: 39-1080 AD NUMBER: 70-19-03 SUBJECT HEADING: Airworthiness Directives; Dornier Ag Model Do-28D-1 Airplanes ACTION: SUMMARY: DATES: Effective September 22, 1970. ADDRESSES: FOR FURTHER INFORMATION CONTACT: SUPPLEMENTARY INFORMATION: REGULATORY TEXT: 70-19-03 DORNIER AG: Amdt. 39-1080. Applies to Model Do-28D-1 Airplanes. To prevent interference between the jumper wires and the aileron and flap control systems, within the next 50 hours' time in service after the effective date of this AD, unless already accomplished, rework the jumper wire installations located in the right and left wing by installing shorter jumper wires, covering the jumper wires with insulation tubing, and rerouting wires in accordance with Dornier Service Bulletin No. 1030-1408, dated 6 July 1970, or an FAA approved equivalent. This amendment becomes effective September 22, 1970. FOOTER:
Source: Official FAA Source ↗
Retrieved: Apr 8, 2026
Rights: U.S. Government Public Domain
This site is not affiliated with or endorsed by the FAA. Always verify with official sources.
Related Airworthiness Directives
90-21-06
final ruleAirworthiness Directives; DORNIER Models Do28D and Do28D-1 Airplanes
Unsafe Condition: Engine mount failure due to loose or damaged rivets at the riveted connections between the L-section and formed sheet of the right-hand and left-hand engine mounts.
89-04-04
final ruleAirworthiness Directives; DORNIER Model Do-28 D-1 Airplanes
Unsafe Condition: Failure to inspect and correctly locate the Center of Gravity Station Guide Line could result in operation beyond the approved forward or rear center of gravity limits.
89-03-15
final ruleAirworthiness Directives; DORNIER Models Do28 D and Do28 D-1 Airplanes
Unsafe Condition: Loose rivets in the horizontal tail bearing fittings and lateral skins and cracks in the rear fuselage frame 10420 and corner gusset could lead to loss of the horizontal tail.
77-14-17 R1
final ruleAirworthiness Directives; Dornier GmbH Model Do 27 and Do 28 Series Airplanes
Unsafe Condition: Defective DORNIER fuel and oil hoses manufactured to specification LN9226 may lead to possible engine failure or sudden seizure of an engine.