AD 68-15-04

final rule

BOEING Model 727 Series Airplanes

AD Number
68-15-04
Status
final_rule
Effective Date
Product Category
aircraft
Docket
Unknown
FR Citation
This information is not available.
Technical illustration of an aircraft electrical generator and wiring assembly
Problem area Electrical system

Applicability

TypeManufacturerModelDetails
aircraft The Boeing Company 727-100 Series BOEING Model 727 Series Airplanes
aircraft The Boeing Company 727-100C Series BOEING Model 727 Series Airplanes
aircraft The Boeing Company 727-200 Series BOEING Model 727 Series Airplanes
aircraft The Boeing Company 727-200F Series BOEING Model 727 Series Airplanes
aircraft The Boeing Company 727 Series BOEING Model 727 Series Airplanes
aircraft The Boeing Company 727C Series BOEING Model 727 Series Airplanes

Unsafe Condition

Damage to wire bundles adjacent to the battery charger

AI-generated summary from the source AD text. Verify against the official source before acting.

Required Actions

Install a flame barrier on the lower inboard side of the R.H. rack support assembly adjacent to the battery charger in accordance with Boeing Service Bulletin No. 24-27 or later FAA approved revisions or an equivalent method approved by the Chief, Aircraft Engineering Division, FAA Western Region.

AI-generated summary from the source AD text. Verify against the official source before acting.

Compliance Time

within the next 1200 hours time in service after the effective date of this AD

AI-generated summary from the source AD text. Verify against the official source before acting.

Affected Aircraft

All Model 727 Series Airplanes

AI-generated summary from the source AD text. Verify against the official source before acting.

Federal Register Abstract

Wire Bundles Adjacent to the Battery Charger

Applicability Source Text

Show captured applicability text from the source AD
AD Final Rules - DRS_68-15-04.html
Copy URL
Print/Save as PDF
Document Versions
 Feedback
Details
AD Number:
68-15-04
Document Type:
AD Final Rules
Docket Number:
Unknown
Subject Heading:
BOEING Model 727 Series Airplanes
Subject:
Wire Bundles Adjacent to the Battery Charger
Status:
Current
Citation:
This information is not available.
Citation Publish Date:
Effective Date:
09/05/1968
Make:
The Boeing Company
Model:
727-100 Series | 727-100C Series | 727-200 Series | 727-200F Series | 727 Series | 727C Series
Product Type:
Aircraft
Product Subtype:
Large Airplane
Affected AD:
Superseded AD:
Affected By:
Superseded By:
Service/Office:
Office of Primary Responsibility:
CFR Part Reference:
Part 39
Comments:
AIRWORTHINESS DIRECTIVES FINAL RULES: 68-15-04
CITATION:   This information is not available.

PAGE NUMBER:  

DOCKET NUMBER:   Unknown

AMENDMENT:   39-645

AD NUMBER:   68-15-04

SUBJECT HEADING:   BOEING Model 727 Series Airplanes

ACTION:  

SUMMARY:  

DATES:   Effective September 5, 1968.

ADDRESSES:  

FOR FURTHER INFORMATION CONTACT:  

SUPPLEMENTARY INFORMATION:  

REGULATORY TEXT:  
68-15-04 BOEING: Amdt. 39-645 revises AD 68-15-04 by amending the compliance requirement. Applies to all Model 727 Series Airplanes.

Compliance required within the next 1200 hours time in service after the effective date of this AD, unless already accomplished.

To prevent damage to wire bundles adjacent to the battery charger, accomplish the following:

Install a flame barrier on the lower inboard side of the R.H. rack support assembly adjacent to the battery charger in accordance with Boeing Service Bulletin No. 24-27 or later FAA approved revisions or an equivalent method approved by the Chief, Aircraft Engineering Division, FAA Western Region.

This amendment becomes effective September 5, 1968.

FOOTER:

Document Text

Show stored source text (verify against official source)
AD Final Rules - DRS_68-15-04.html
Copy URL
Print/Save as PDF
Document Versions
 Feedback
Details
AD Number:
68-15-04
Document Type:
AD Final Rules
Docket Number:
Unknown
Subject Heading:
BOEING Model 727 Series Airplanes
Subject:
Wire Bundles Adjacent to the Battery Charger
Status:
Current
Citation:
This information is not available.
Citation Publish Date:
Effective Date:
09/05/1968
Make:
The Boeing Company
Model:
727-100 Series | 727-100C Series | 727-200 Series | 727-200F Series | 727 Series | 727C Series
Product Type:
Aircraft
Product Subtype:
Large Airplane
Affected AD:
Superseded AD:
Affected By:
Superseded By:
Service/Office:
Office of Primary Responsibility:
CFR Part Reference:
Part 39
Comments:
AIRWORTHINESS DIRECTIVES FINAL RULES: 68-15-04
CITATION:   This information is not available.

PAGE NUMBER:  

DOCKET NUMBER:   Unknown

AMENDMENT:   39-645

AD NUMBER:   68-15-04

SUBJECT HEADING:   BOEING Model 727 Series Airplanes

ACTION:  

SUMMARY:  

DATES:   Effective September 5, 1968.

ADDRESSES:  

FOR FURTHER INFORMATION CONTACT:  

SUPPLEMENTARY INFORMATION:  

REGULATORY TEXT:  
68-15-04 BOEING: Amdt. 39-645 revises AD 68-15-04 by amending the compliance requirement. Applies to all Model 727 Series Airplanes.

Compliance required within the next 1200 hours time in service after the effective date of this AD, unless already accomplished.

To prevent damage to wire bundles adjacent to the battery charger, accomplish the following:

Install a flame barrier on the lower inboard side of the R.H. rack support assembly adjacent to the battery charger in accordance with Boeing Service Bulletin No. 24-27 or later FAA approved revisions or an equivalent method approved by the Chief, Aircraft Engineering Division, FAA Western Region.

This amendment becomes effective September 5, 1968.

FOOTER:

Source: Official FAA Source ↗

Retrieved: Apr 8, 2026

Rights: U.S. Government Public Domain

This site is not affiliated with or endorsed by the FAA. Always verify with official sources.