AD 46-49-01

final rule

Airworthiness Directives; ERCO Model All 415 Series Airplanes

AD Number
46-49-01
Status
final_rule
Effective Date
Product Category
aircraft
Docket
Unknown
FR Citation
This information is not available
Technical illustration of an aircraft landing gear and wheel assembly
Problem area Landing gear

Applicability

TypeManufacturerModelDetails
aircraft Univair Aircraft Corporation 415-C Airworthiness Directives; ERCO Model All 415 Series Airplanes
aircraft Univair Aircraft Corporation 415-CD Airworthiness Directives; ERCO Model All 415 Series Airplanes
aircraft Univair Aircraft Corporation 415-D Airworthiness Directives; ERCO Model All 415 Series Airplanes

Unsafe Condition

Failures of the Magnesium Die Cast Nose Wheel (Casting No. 34206) due to increasing number of failures.

AI-generated summary from the source AD text. Verify against the official source before acting.

Required Actions

Replace the magnesium die cast nose wheel with a permanent mold aluminum alloy nose wheel (casting No. 34204). Ensure the replacement wheel, tire, and tube are statically and dynamically balanced before use. Exercise care in removing the old nose wheel to avoid damaging the axle, oleo, and supporting structure.

AI-generated summary from the source AD text. Verify against the official source before acting.

Compliance Time

prior to February 1, 1947

AI-generated summary from the source AD text. Verify against the official source before acting.

Affected Aircraft

ERCO Model All 415 Series Airplanes equipped with Magnesium Die Cast Nose Wheel, Casting No. 34206

AI-generated summary from the source AD text. Verify against the official source before acting.

Federal Register Abstract

Nose wheel replacement

Applicability Source Text

Show captured applicability text from the source AD
AD Final Rules - DRS_46-49-01.html
Copy URL
Print/Save as PDF
Document Versions
 Feedback
Details
AD Number:
46-49-01
Document Type:
AD Final Rules
Docket Number:
Unknown
Subject Heading:
Airworthiness Directives; ERCO Model All 415 Series Airplanes
Subject:
Nose wheel replacement
Status:
Current
Citation:
This information is not available
Citation Publish Date:
Effective Date:
Make:
Univair Aircraft Corporation
Model:
415-C | 415-CD | 415-D
Product Type:
Aircraft
Product Subtype:
Small Airplane
Affected AD:
Superseded AD:
Affected By:
Superseded By:
Service/Office:
Office of Primary Responsibility:
CFR Part Reference:
Part 39
Comments:
AIRWORTHINESS DIRECTIVES FINAL RULES: 46-49-01
CITATION:   This information is not available

PAGE NUMBER:  

DOCKET NUMBER:   Unknown

AMENDMENT:  

AD NUMBER:   46-49-01

SUBJECT HEADING:   Airworthiness Directives; ERCO Model All 415 Series Airplanes

ACTION:  

SUMMARY:  

DATES:  

ADDRESSES:  

FOR FURTHER INFORMATION CONTACT:  

SUPPLEMENTARY INFORMATION:  

REGULATORY TEXT:   46-49-01 ERCO: (Was Mandatory Note 10 of AD-718-6.) Applies to All 415 Series Airplanes Equipped With Magnesium Die Cast Nose Wheel, Casting No. 34206.
Compliance required prior to February 1, 1947.
Due to an increasing number of failures of the Magnesium Die Cast Nose Wheel (which bears the number 34206 in raised letters), it appears essential that this wheel be replaced by a Permanent Mold Aluminum Alloy Nose Wheel (casting No. 34204) which the manufacturer is making available to all distributors and dealers. The replacement wheel, tire, and tube should be statically and dynamically balanced before use. Care should be exercised in removing the old nose wheel to avoid damaging the axle, oleo, and supporting structure.
(Ercoupe Service Department Bulletin No. 16 dated October 28, 1946, covers this same subject in greater detail.)

FOOTER:

Document Text

Show stored source text (verify against official source)
AD Final Rules - DRS_46-49-01.html
Copy URL
Print/Save as PDF
Document Versions
 Feedback
Details
AD Number:
46-49-01
Document Type:
AD Final Rules
Docket Number:
Unknown
Subject Heading:
Airworthiness Directives; ERCO Model All 415 Series Airplanes
Subject:
Nose wheel replacement
Status:
Current
Citation:
This information is not available
Citation Publish Date:
Effective Date:
Make:
Univair Aircraft Corporation
Model:
415-C | 415-CD | 415-D
Product Type:
Aircraft
Product Subtype:
Small Airplane
Affected AD:
Superseded AD:
Affected By:
Superseded By:
Service/Office:
Office of Primary Responsibility:
CFR Part Reference:
Part 39
Comments:
AIRWORTHINESS DIRECTIVES FINAL RULES: 46-49-01
CITATION:   This information is not available

PAGE NUMBER:  

DOCKET NUMBER:   Unknown

AMENDMENT:  

AD NUMBER:   46-49-01

SUBJECT HEADING:   Airworthiness Directives; ERCO Model All 415 Series Airplanes

ACTION:  

SUMMARY:  

DATES:  

ADDRESSES:  

FOR FURTHER INFORMATION CONTACT:  

SUPPLEMENTARY INFORMATION:  

REGULATORY TEXT:   46-49-01 ERCO: (Was Mandatory Note 10 of AD-718-6.) Applies to All 415 Series Airplanes Equipped With Magnesium Die Cast Nose Wheel, Casting No. 34206.
Compliance required prior to February 1, 1947.
Due to an increasing number of failures of the Magnesium Die Cast Nose Wheel (which bears the number 34206 in raised letters), it appears essential that this wheel be replaced by a Permanent Mold Aluminum Alloy Nose Wheel (casting No. 34204) which the manufacturer is making available to all distributors and dealers. The replacement wheel, tire, and tube should be statically and dynamically balanced before use. Care should be exercised in removing the old nose wheel to avoid damaging the axle, oleo, and supporting structure.
(Ercoupe Service Department Bulletin No. 16 dated October 28, 1946, covers this same subject in greater detail.)

FOOTER:

Source: Official FAA Source ↗

Retrieved: Apr 8, 2026

Rights: U.S. Government Public Domain

This site is not affiliated with or endorsed by the FAA. Always verify with official sources.