AD 2020-26-21
Applicability
| Type | Manufacturer | Model | Details |
|---|---|---|---|
| aircraft | Airbus | SAS | Airworthiness Directives; Airbus SAS Airplanes |
| aircraft | Aviat | Various | Airworthiness Directives; Airbus SAS Airplanes |
Unsafe Condition
gaps found on self-aligning nuts for eight fasteners were out of tolerance, which could reduce the fatigue and damage tolerance properties of the affected area, and possibly affect the structural integrity of the rear cone of the fuselage.
AI-generated summary from the source AD text. Verify against the official source before acting.
Required Actions
a rotating probe test of all fastener holes located in the affected area for any discrepancies, an eddy current inspection of the surrounding flange for any discrepancies, a detailed inspection of certain frames for any discrepancies, and corrective actions if necessary, as specified in an EASA AD.
AI-generated summary from the source AD text. Verify against the official source before acting.
Compliance Time
Before further flight
AI-generated summary from the source AD text. Verify against the official source before acting.
Affected Aircraft
Airbus SAS Model A350-941 airplanes, manufacturer serial number 0307 and subsequent.
AI-generated summary from the source AD text. Verify against the official source before acting.
Source: Official FAA Source ↗
Retrieved: Apr 6, 2026
Rights: U.S. Government Public Domain
This site is not affiliated with or endorsed by the FAA. Always verify with official sources.