AD 2018-25-14

[Federal Register Volume 83, Number 240 (Friday, December 14, 2018)]
[Rules and Regulations]
[Pages 64225-64227]
From the Federal Register Online via the Government Publishing Office [<a href="http://www.gpo.gov">www.gpo.gov</a>]
[FR Doc No: 2018-26630]


=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2018-0802; Product Identifier 2018-NM-082-AD; Amendment 
39-19525; AD 2018-25-14]
RIN 2120-AA64


Airworthiness Directives; Fokker Services B.V. Airplanes

AGENCY: Federal Aviation Administration (FAA), Department of 
Transportation (DOT).

ACTION: Final rule.

-----------------------------------------------------------------------

SUMMARY: We are adopting a new airworthiness directive (AD) for all 
Fokker Services B.V. Model F28 Mark 0070 and 0100 airplanes. This AD 
was prompted by reports of electrical arcing between the auxiliary 
power unit (APU) starter motor positive terminal and the APU fuel drain 
line. This AD requires the removal of certain clamps and replacement of 
the flexible APU fuel drain line. We are issuing this AD to address the 
unsafe condition on these products.

DATES: This AD is effective January 18, 2019.
    The Director of the Federal Register approved the incorporation by 
reference of a certain publication listed in this AD as of January 18, 
2019.

ADDRESSES: For service information identified in this final rule, 
contact Fokker Services B.V., Technical Services Dept., P.O. Box 1357, 
2130 EL Hoofddorp, the Netherlands; telephone +31 (0)88-6280-350; fax 
+31 (0)88-6280-111; email <a href="/cdn-cgi/l/email-protection#671302040f090e04060b140215110e0402142701080c0c02154904080a"><span class="__cf_email__" data-cfemail="225647414a4c4b41434e514750544b41475162444d494947500c414d4f">[email&#160;protected]</span></a>; internet <a href="http://www.myfokkerfleet.com">http://www.myfokkerfleet.com</a>. You may view this service information at the 
FAA, Transport Standards Branch, 2200 South 216th St., Des Moines, WA. 
For information on the availability of this material at the FAA, call 
206-231-3195. It is also available on the internet at <a href="http://www.regulations.gov">http://www.regulations.gov</a> by searching for and locating Docket No. FAA-2018-
0802.

Examining the AD Docket

    You may examine the AD docket on the internet at <a href="http://www.regulations.gov">http://www.regulations.gov</a> by searching for and locating Docket No. FAA-2018-
0802; or in person at Docket Operations between 9 a.m. and 5 p.m., 
Monday through Friday, except Federal holidays. The AD docket contains 
this final rule, the regulatory evaluation, any comments received, and 
other information. The address for Docket

[[Page 64226]]

Operations (phone: 800-647-5527) is U.S. Department of Transportation, 
Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 
New Jersey Avenue SE, Washington, DC 20590.

FOR FURTHER INFORMATION CONTACT: Tom Rodriguez, Aerospace Engineer, 
International Section, Transport Standards Branch, FAA, 2200 South 
216th St., Des Moines, WA 98198; telephone and fax 206-231-3226.

SUPPLEMENTARY INFORMATION: 

Discussion

    We issued a notice of proposed rulemaking (NPRM) to amend 14 CFR 
part 39 by adding an AD that would apply to all Fokker Services B.V. 
Model F28 Mark 0070 and 0100 airplanes. The NPRM published in the 
Federal Register on September 28, 2018 (83 FR 49020). The NPRM was 
prompted by reports of electrical arcing between the APU starter motor 
positive terminal and the APU fuel drain line. The NPRM proposed to 
require the removal of certain clamps and replacement of the flexible 
APU fuel drain line.
    We are issuing this AD to address reports of electrical arcing 
between the APU starter motor positive terminal and the APU fuel drain 
line, which could lead to a fire during APU start and possibly result 
in damage to the airplane.
    The European Aviation Safety Agency (EASA), which is the Technical 
Agent for the Member States of the European Union, has issued EASA 
Airworthiness Directive 2017-0008, dated January 16, 2017 (referred to 
after this as the Mandatory Continuing Airworthiness Information, or 
``the MCAI''), to correct an unsafe condition for all Fokker Services 
B.V. Model F28 Mark 0070 and 0100 airplanes. The MCAI states:

    Reports were received of electrical arcing between the auxiliary 
power unit (APU) starter motor positive terminal and the APU fuel 
drain line. Investigation showed that these events were due to 
contact between the metal braiding on the APU fuel drain line and 
the positive terminal of the APU starter motor.
    This condition, if not corrected, could lead to a fire during 
APU start, possibly resulting in damage to the aeroplane.
    In response to these findings, Fokker issued Service Bulletin 
(SB) SBF100-49-023, later amended by SB Change Notification (SBCN), 
with instructions to install two additional clamps on the APU fuel 
supply line and the flexible APU fuel drain line. Consequently, CAA-
NL [Civil Aviation Authority-the Netherlands] issued the Netherlands 
AD 92-139 [which corresponds to FAA AD 95-21-20, Amendment 39-9407 
(60 FR 53857, October 18, 1995) (``AD 95-21-20'')] to require the 
actions described in Fokker SBF100-49-023.
    Since that [the Netherlands] AD was issued, following reports of 
arcing and chafing damage to the APU fuel drain line, the 
investigation revealed that the two additional clamps and the 
instructions in SBF100-49-023 would not meet the intent of ensuring 
sufficient clearance between the APU fuel drain line and the 
positive terminal of the APU starter motor.
    To address this potential unsafe condition, Fokker Services 
[B.V.] published SBF100-49-037 to introduce a new flexible APU fuel 
drain line that is one inch shorter and has one elbow flange, thus 
enabling to restore sufficient clearance with the positive terminal 
of the APU starter motor.
    For the reasons described above, this AD supersedes CAA-NL [the 
Netherlands] AD 92-139 and requires replacement of the flexible APU 
fuel drain line, removal of the additional clamps introduced by 
SBF100-49-023, and a check to verify sufficient clearance between 
the APU fuel drain line and the positive terminal of the APU starter 
motor.

    You may examine the MCAI in the AD docket on the internet at <a href="http://www.regulations.gov">http://www.regulations.gov</a> by searching for and locating Docket No. FAA-2018-
0802.

Comments

    We gave the public the opportunity to participate in developing 
this final rule. We received no comments on the NPRM or on the 
determination of the cost to the public.

Conclusion

    We reviewed the relevant data and determined that air safety and 
the public interest require adopting this final rule as proposed, 
except for minor editorial changes. We have determined that these minor 
changes:
    <bullet> Are consistent with the intent that was proposed in the 
NPRM for addressing the unsafe condition; and
    <bullet> Do not add any additional burden upon the public than was 
already proposed in the NPRM.

Related Service Information Under 1 CFR Part 51

    Fokker Services B.V. has issued Fokker Service Bulletin SBF100-49-
037, dated October 31, 2016. This service information describes 
procedures for removing certain clamps and replacing the flexible APU 
fuel drain line (which includes making sure there is sufficient 
clearance between the new APU fuel drain line and the positive terminal 
of the APU starter motor and that the earth lead is not chafing against 
the fuel supply or the fuel drain line). This service information is 
reasonably available because the interested parties have access to it 
through their normal course of business or by the means identified in 
the ADDRESSES section.

Costs of Compliance

    We estimate that this AD affects 5 airplanes of U.S. registry. We 
estimate the following costs to comply with this AD:

                                                 Estimated Costs
----------------------------------------------------------------------------------------------------------------
                                                                                    Cost per       Cost on U.S.
                          Labor cost                              Parts cost        product         operators
----------------------------------------------------------------------------------------------------------------
1 work-hour x $85 per hour = $85.............................            $963           $1,048           $5,240
----------------------------------------------------------------------------------------------------------------

Authority for This Rulemaking

    Title 49 of the United States Code specifies the FAA's authority to 
issue rules on aviation safety. Subtitle I, section 106, describes the 
authority of the FAA Administrator. Subtitle VII: Aviation Programs, 
describes in more detail the scope of the Agency's authority.
    We are issuing this rulemaking under the authority described in 
Subtitle VII, Part A, Subpart III, Section 44701: ``General 
requirements.'' Under that section, Congress charges the FAA with 
promoting safe flight of civil aircraft in air commerce by prescribing 
regulations for practices, methods, and procedures the Administrator 
finds necessary for safety in air commerce. This regulation is within 
the scope of that authority because it addresses an unsafe condition 
that is likely to exist or develop on products identified in this 
rulemaking action.
    This AD is issued in accordance with authority delegated by the 
Executive Director, Aircraft Certification Service, as authorized by 
FAA Order 8000.51C. In accordance with that order, issuance of ADs is 
normally a function of the Compliance and Airworthiness Division, but 
during this transition period, the Executive Director has

[[Page 64227]]

delegated the authority to issue ADs applicable to transport category 
airplanes and associated appliances to the Director of the System 
Oversight Division.

Regulatory Findings

    This AD will not have federalism implications under Executive Order 
13132. This AD will not have a substantial direct effect on the States, 
on the relationship between the national government and the States, or 
on the distribution of power and responsibilities among the various 
levels of government.
    For the reasons discussed above, I certify that this AD:
    (1) Is not a ``significant regulatory action'' under Executive 
Order 12866,
    (2) Is not a ``significant rule'' under the DOT Regulatory Policies 
and Procedures (44 FR 11034, February 26, 1979),
    (3) Will not affect intrastate aviation in Alaska, and
    (4) Will not have a significant economic impact, positive or 
negative, on a substantial number of small entities under the criteria 
of the Regulatory Flexibility Act.

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Incorporation by 
reference, Safety.

Adoption of the Amendment

    Accordingly, under the authority delegated to me by the 
Administrator, the FAA amends 14 CFR part 39 as follows:

PART 39--AIRWORTHINESS DIRECTIVES

0
1. The authority citation for part 39 continues to read as follows:

    Authority: 49 U.S.C. 106(g), 40113, 44701.


Sec.  39.13  [Amended]

0
2. The FAA amends Sec.  39.13 by adding the following new airworthiness 
directive (AD):

2018-25-14 Fokker Services B.V.: Amendment 39-19525; Docket No. FAA-
2018-0802; Product Identifier 2018-NM-082-AD.

(a) Effective Date

    This AD is effective January 18, 2019.

(b) Affected ADs

    This AD affects AD 95-21-20, Amendment 39-9407 (60 FR 53857, 
October 18, 1995) (``AD 95-21-20'').

(c) Applicability

    This AD applies to Fokker Services B.V. Model F28 Mark 0070 and 
0100 airplanes, certificated in any category, all serial numbers.

(d) Subject

    Air Transport Association (ATA) of America Code 49, Airborne 
auxiliary power.

(e) Reason

    This AD was prompted by reports of electrical arcing between the 
auxiliary power unit (APU) starter motor positive terminal and the 
APU fuel drain line. We are issuing this AD to address this unsafe 
condition, which could lead to a fire during APU start and possibly 
result in damage to the airplane.

(f) Compliance

    Comply with this AD within the compliance times specified, 
unless already done.

(g) Modification

    Within 12 months after the effective date of this AD: Remove the 
two additional clamps, part number (P/N) MS21919WCH5 and P/N 
MS21919WCH13, and replace APU fuel drain line P/N D67066-409 with a 
new APU fuel drain line P/N W67066-401, in accordance with the 
Accomplishment Instructions of Fokker Service Bulletin SBF100-49-
037, dated October 31, 2016.

(h) Terminating Actions for AD 95-21-20

    Accomplishing the actions required by paragraph (g) of this AD 
terminates all requirements of AD 95-21-20.

(i) Parts Installation Prohibition

    No person may install APU fuel drain line P/N D67066-409 after 
modification of an airplane as required by paragraph (g) of this AD.

(j) Other FAA AD Provisions

    The following provisions also apply to this AD:
    (1) Alternative Methods of Compliance (AMOCs): The Manager, 
International Section, Transport Standards Branch, FAA, has the 
authority to approve AMOCs for this AD, if requested using the 
procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, 
send your request to your principal inspector or local Flight 
Standards District Office, as appropriate. If sending information 
directly to the International Section, send it to the attention of 
the person identified in paragraph (k)(2) of this AD. Information 
may be emailed to: <a href="/cdn-cgi/l/email-protection#5c65711d1211716d6d6a711d11131f710e190d09190f080f1c3a3d3d723b332a"><span class="__cf_email__" data-cfemail="340d19757a79190505021975797b77196671656171676067745255551a535b42">[email&#160;protected]</span></a>. Before using any 
approved AMOC, notify your appropriate principal inspector, or 
lacking a principal inspector, the manager of the local flight 
standards district office/certificate holding district office.
    (2) Contacting the Manufacturer: For any requirement in this AD 
to obtain corrective actions from a manufacturer, the action must be 
accomplished using a method approved by the Manager, International 
Section, Transport Standards Branch, FAA; or the European Aviation 
Safety Agency (EASA); or Fokker Services B.V.'s EASA Design 
Organization Approval (DOA). If approved by the DOA, the approval 
must include the DOA-authorized signature.

(k) Related Information

    (1) Refer to Mandatory Continuing Airworthiness Information 
(MCAI) EASA Airworthiness Directive 2017-0008, dated January 16, 
2017, for related information. This MCAI may be found in the AD 
docket on the internet at <a href="http://www.regulations.gov">http://www.regulations.gov</a> by searching 
for and locating Docket No. FAA-2018-0802.
    (2) For more information about this AD, contact Tom Rodriguez, 
Aerospace Engineer, International Section, Transport Standards 
Branch, FAA, 2200 South 216th St., Des Moines, WA 98198; telephone 
and fax 206-231-3226.

(l) Material Incorporated by Reference

    (1) The Director of the Federal Register approved the 
incorporation by reference (IBR) of the service information listed 
in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
    (2) You must use this service information as applicable to do 
the actions required by this AD, unless this AD specifies otherwise.
    (i) Fokker Service Bulletin SBF100-49-037, dated October 31, 
2016.
    (ii) [Reserved]
    (3) For service information identified in this AD, contact 
Fokker Services B.V., Technical Services Dept., P.O. Box 1357, 2130 
EL Hoofddorp, the Netherlands; telephone +31 (0)88-6280-350; fax +31 
(0)88-6280-111; email <a href="/cdn-cgi/l/email-protection#f78392949f999e94969b849285819e949284b791989c9c9285d994989a"><span class="__cf_email__" data-cfemail="ef9b8a8c8781868c8e839c8a9d99868c8a9caf898084848a9dc18c8082">[email&#160;protected]</span></a>; internet <a href="http://www.myfokkerfleet.com">http://www.myfokkerfleet.com</a>.
    (4) You may view this service information at the FAA, Transport 
Standards Branch, 2200 South 216th St., Des Moines, WA. For 
information on the availability of this material at the FAA, call 
206-231-3195.
    (5) You may view this service information that is incorporated 
by reference at the National Archives and Records Administration 
(NARA). For information on the availability of this material at 
NARA, call 202-741-6030, or go to: <a href="http://www.archives.gov/federal-register/cfr/ibr-locations.html">http://www.archives.gov/federal-register/cfr/ibr-locations.html</a>.

    Issued in Des Moines, Washington, on November 29, 2018.
James Cashdollar,
Acting Director, System Oversight Division, Aircraft Certification 
Service.
[FR Doc. 2018-26630 Filed 12-13-18; 8:45 am]
 BILLING CODE 4910-13-P