AD 2018-04-04

[Federal Register Volume 83, Number 37 (Friday, February 23, 2018)]
[Rules and Regulations]
[Pages 7972-7975]
From the Federal Register Online via the Government Publishing Office [<a href="http://www.gpo.gov">www.gpo.gov</a>]
[FR Doc No: 2018-03438]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2017-1025; Product Identifier 2017-NM-137-AD; Amendment 
39-19199; AD 2018-04-04]
RIN 2120-AA64


Airworthiness Directives; Bombardier, Inc., Airplanes

AGENCY: Federal Aviation Administration (FAA), Department of 
Transportation (DOT).

ACTION: Final rule.

-----------------------------------------------------------------------

SUMMARY: We are adopting a new airworthiness directive (AD) for certain 
Bombardier, Inc., Model CL-600-2C10 (Regional Jet Series 700, 701, & 
702), CL-600-2D15 (Regional Jet Series 705), CL-600-2D24 (Regional Jet 
Series 900), and CL-600-2E25 (Regional Jet Series 1000) airplanes. This 
AD was prompted by several incidents of electrical shorting and sparks 
caused by de-icing fluid leaks between flight deck windshields and side 
windows. This AD requires water spray tests and general visual 
inspections for water in the flight deck compartment, and water removal 
and sealant application if necessary. We are issuing this AD to address 
the unsafe condition on these products.

DATES: This AD is effective March 30, 2018.
    The Director of the Federal Register approved the incorporation by 
reference of a certain publication listed in this AD as of March 30, 
2018.

ADDRESSES: For service information identified in this final rule, 
contact Bombardier, Inc., 400 C[ocirc]te Vertu Road West, Dorval, 
Qu[eacute]bec H4S 1Y9, Canada; Widebody Customer Response Center North 
America toll-free telephone 1-866-538-1247 or direct-dial telephone 1-
514-855-2999; fax 514-855-7401; email <a href="/cdn-cgi/l/email-protection#f19092df88849db19094839edf939e9c93908395989483df929e9c"><span class="__cf_email__" data-cfemail="7213115c0b071e321317001d5c101d1f101300161b17005c111d1f">[email&#160;protected]</span></a>; 
internet <a href="http://www.bombardier.com">http://www.bombardier.com</a>. You may view this service 
information at the FAA, Transport Standards Branch, 1601 Lind Avenue 
SW, Renton, WA. For information on the availability of this material at 
the FAA, call 425-227-1221. It is also available on the internet at 
<a href="http://www.regulations.gov">http://www.regulations.gov</a> by searching for and locating Docket No. 
FAA-2017-1025.

Examining the AD Docket

    You may examine the AD docket on the internet at <a href="http://www.regulations.gov">http://www.regulations.gov</a> by searching for and locating Docket No. FAA-2017-
1025; or in person at the Docket Management Facility between 9 a.m. and 
5 p.m., Monday through Friday, except Federal holidays. The AD docket 
contains this AD, the regulatory evaluation, any comments received, and 
other information. The street address for the Docket Office (telephone 
800-647-5527) is Docket Management Facility, U.S. Department of 
Transportation, Docket Operations, M-30, West Building Ground Floor, 
Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590.

FOR FURTHER INFORMATION CONTACT: Steven Dzierzynski, Aerospace 
Engineer, Avionics and Administrative Services Section, FAA, New York 
ACO Branch, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; 
telephone 516-228-7367; fax 516-794-5531.

SUPPLEMENTARY INFORMATION: 

Discussion

    We issued a notice of proposed rulemaking (NPRM) to amend 14 CFR 
part 39 by adding an AD that would apply to certain Bombardier, Inc., 
Model CL-600-2C10 (Regional Jet Series 700, 701, & 702), CL-600-2D15 
(Regional Jet Series 705), CL-600-2D24 (Regional Jet Series 900), and 
CL-600-2E25 (Regional Jet Series 1000) airplanes. The NPRM published in 
the Federal Register on November 17, 2017 (82 FR 54304) (``the NPRM'').
    Transport Canada Civil Aviation (TCCA), which is the aviation 
authority for Canada, has issued Canadian Airworthiness Directive CF-
2017-28, dated August 23, 2017 (referred to after this as the Mandatory 
Continuing Airworthiness Information, or ``the MCAI''), to correct an 
unsafe condition for certain Bombardier, Inc., Model CL-600-2C10 
(Regional Jet Series 700, 701, & 702), CL-600-2D15 (Regional Jet Series 
705), CL-600-2D24 (Regional Jet Series 900), and CL-600-2E25 (Regional 
Jet Series 1000) airplanes. The MCAI states:

    Several incidents of electrical shorting and sparks have been 
reported in the cockpit of CL-600-2C10 and CL-600-2D24 aeroplanes. 
De-icing fluid can leak between the windshields and side windows, 
leading to possible damage to the cockpit floodlight wires and 
electrical connections. If not corrected, this condition may result 
in a flight compartment fire.
    This [Canadian] AD is issued to mandate a water spray test and 
[general visual] inspection for evidence of fluid ingress into the 
flight compartment. It also provides mandatory instructions for 
sealant application if required.

    You may examine the MCAI in the AD docket on the internet at <a href="http://www.regulations.gov">http://www.regulations.gov</a> by searching for and locating Docket No. FAA-2017-
1025.

Comments

    We gave the public the opportunity to participate in developing 
this final rule. We received no comments on the NPRM or on the 
determination of the cost to the public.

Conclusion

    We reviewed the relevant data and determined that air safety and 
the public interest require adopting this AD as proposed except for 
minor editorial changes. We have determined that these minor changes:
    <bullet> Are consistent with the intent that was proposed in the 
NPRM for correcting the unsafe condition; and

[[Page 7973]]

    <bullet> Do not add any additional burden upon the public than was 
already proposed in the NPRM.

Related Service Information Under 1 CFR Part 51

    Bombardier, Inc., has issued Service Bulletin 670BA-56-003, 
Revision A, dated April 13, 2016. This service information describes 
procedures for doing water spray tests on the flight deck windows, 
doing general visual inspections for water in the flight deck 
compartment, removing water, and applying sealant to the flight deck 
windows. This service information is reasonably available because the 
interested parties have access to it through their normal course of 
business or by the means identified in the ADDRESSES section.

Costs of Compliance

    We estimate that this AD affects 543 airplanes of U.S. registry.
    We estimate the following costs to comply with this AD:

                                                 Estimated Costs
----------------------------------------------------------------------------------------------------------------
                                                                                     Cost per      Cost on U.S.
                Action                         Labor cost           Parts cost        product        operators
----------------------------------------------------------------------------------------------------------------
Spray tests and inspections...........  2 work-hours x $85 per                $0            $170         $92,310
                                         hour = $170.
----------------------------------------------------------------------------------------------------------------

    We estimate the following costs to do any necessary water removal 
and sealant application that would be required based on the results of 
the inspection. We have no way of determining the number of airplanes 
that might need this water removal and sealant application:

                                               On-Condition Costs
----------------------------------------------------------------------------------------------------------------
                                                                                                     Cost per
                    Action                                 Labor cost               Parts cost        product
----------------------------------------------------------------------------------------------------------------
Water removal and sealant application.........  4 work-hours x $85 per hour =               $308            $648
                                                 $340.
----------------------------------------------------------------------------------------------------------------

Authority for This Rulemaking

    Title 49 of the United States Code specifies the FAA's authority to 
issue rules on aviation safety. Subtitle I, section 106, describes the 
authority of the FAA Administrator. ``Subtitle VII: Aviation 
Programs,'' describes in more detail the scope of the Agency's 
authority.
    We are issuing this rulemaking under the authority described in 
``Subtitle VII, Part A, Subpart III, Section 44701: General 
requirements.'' Under that section, Congress charges the FAA with 
promoting safe flight of civil aircraft in air commerce by prescribing 
regulations for practices, methods, and procedures the Administrator 
finds necessary for safety in air commerce. This regulation is within 
the scope of that authority because it addresses an unsafe condition 
that is likely to exist or develop on products identified in this 
rulemaking action.
    This AD is issued in accordance with authority delegated by the 
Executive Director, Aircraft Certification Service, as authorized by 
FAA Order 8000.51C. In accordance with that order, issuance of ADs is 
normally a function of the Compliance and Airworthiness Division, but 
during this transition period, the Executive Director has delegated the 
authority to issue ADs applicable to transport category airplanes to 
the Director of the System Oversight Division.

Regulatory Findings

    We determined that this AD will not have federalism implications 
under Executive Order 13132. This AD will not have a substantial direct 
effect on the States, on the relationship between the national 
government and the States, or on the distribution of power and 
responsibilities among the various levels of government.
    For the reasons discussed above, I certify that this AD:
    1. Is not a ``significant regulatory action'' under Executive Order 
12866,
    2. Is not a ``significant rule'' under the DOT Regulatory Policies 
and Procedures (44 FR 11034, February 26, 1979),
    3. Will not affect intrastate aviation in Alaska, and
    4. Will not have a significant economic impact, positive or 
negative, on a substantial number of small entities under the criteria 
of the Regulatory Flexibility Act.

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Incorporation by 
reference, Safety.

Adoption of the Amendment

    Accordingly, under the authority delegated to me by the 
Administrator, the FAA amends 14 CFR part 39 as follows:

PART 39--AIRWORTHINESS DIRECTIVES

0
1. The authority citation for part 39 continues to read as follows:

    Authority: 49 U.S.C. 106(g), 40113, 44701.


Sec.  39.13   [Amended]

0
2. The FAA amends Sec.  39.13 by adding the following new airworthiness 
directive (AD):

2018-04-04 Bombardier, Inc.: Amendment 39-19199; Docket No. FAA-
2017-1025; Product Identifier 2017-NM-137-AD.

(a) Effective Date

    This AD is effective March 30, 2018.

(b) Affected ADs

    None.

(c) Applicability

    This AD applies to the airplanes identified in paragraphs 
(c)(1), (c)(2), and (c)(3) of this AD, certificated in any category.
    (1) Bombardier, Inc., Model CL-600-2C10 (Regional Jet Series 
700, 701, & 702) airplanes, serial numbers 10003 through 10342 
inclusive.
    (2) Bombardier, Inc., Model CL-600-2D15 (Regional Jet Series 
705) and Model CL-600-2D24 (Regional Jet Series 900) airplanes, 
serial numbers 15001 through 15367 inclusive.
    (3) Bombardier, Inc., Model CL-600-2E25 (Regional Jet Series 
1000) airplanes, serial numbers 19001 through 19041 inclusive.

(d) Subject

    Air Transport Association (ATA) of America Code 56, Windows.

[[Page 7974]]

(e) Reason

    This AD was prompted by several incidents of electrical shorting 
and sparks caused by de-icing fluid leaks between flight deck 
windshields and side windows. We are issuing this AD to detect and 
correct de-icing fluid entering the flight deck, which could damage 
the flight deck floodlight wires and electrical connections, and 
ultimately could lead to a fire in the flight deck compartment.

(f) Compliance

    Comply with this AD within the compliance times specified, 
unless already done.

(g) Left Flight Deck Windshield and Side Window Spray Test, Inspection, 
Water Removal and Sealant Application

    For airplanes on which a left flight deck windshield or a left 
flight deck side window was replaced as specified in Bombardier 
Aircraft Maintenance Manual (AMM) task 56-11-01-400-801, Revision 
48, dated March 25, 2015, or any previous revision of that task; or 
Bombardier AMM task 56-12-01-400-801, Revision 48, dated March 25, 
2015, or any previous revision of that task: At the applicable time 
specified in paragraph (g)(1) or (g)(2) of this AD, perform a water 
spray test and do a general visual inspection of the left flight 
deck windshield and left flight deck side window for evidence of 
water ingress into the flight deck, in accordance with Part A of the 
Accomplishment Instructions of Bombardier Service Bulletin 670BA-56-
003, Revision A, dated April 13, 2016. If water is found in the 
flight deck compartment: Before further flight, remove the water, 
and apply sealant on the left flight deck windows in accordance with 
Part C of the Accomplishment Instructions of Bombardier Service 
Bulletin 670BA-56-003, Revision A, dated April 13, 2016.
    (1) For airplanes on which Bombardier in-service ModSum 
IS67033110181 has not been incorporated: Within 2,500 flight hours 
after the effective date of this AD.
    (2) For airplanes on which Bombardier in-service ModSum 
IS67033110181 has been incorporated: Within 6,600 flight hours after 
the effective date of this AD.

(h) Right Flight Deck Windshield and Side Window Spray Test, 
Inspection, Water Removal and Sealant Application

    For airplanes on which a right flight deck windshield or a right 
flight deck side window was replaced as specified in Bombardier AMM 
task 56-11-01-400-801, Revision 48, dated March 25, 2015, or any 
previous revision of that task; or Bombardier AMM task 56-12-01-400-
801, Revision 48, dated March 25, 2015, or any previous revision of 
that task: At the applicable time specified in paragraph (h)(1) or 
(h)(2) of this AD, perform a water spray test and do a general 
visual inspection of the right flight deck windshield and right 
flight deck side window for evidence of water ingress into the 
flight deck, in accordance with Part B of the Accomplishment 
Instructions of Bombardier Service Bulletin 670BA-56-003, Revision 
A, dated April 13, 2016. If water is found in the flight deck 
compartment: Before further flight, remove the water, and apply 
sealant on the right flight deck windows in accordance with Part D 
of the Accomplishment Instructions of Bombardier Service Bulletin 
670BA-56-003, Revision A, dated April 13, 2016.
    (1) For airplanes on which Bombardier in-service ModSum 
IS67033110181 has not been incorporated: Within 2,500 flight hours 
after the effective date of this AD.
    (2) For airplanes on which Bombardier in-service ModSum 
IS67033110181 has been incorporated: Within 6,600 flight hours after 
the effective date of this AD.

(i) Credit for Previous Actions

    (1) This paragraph provides credit for actions required by 
paragraph (g) of this AD, if those actions were performed before the 
effective date of this AD using the service information specified in 
paragraphs (i)(1)(i), (i)(1)(ii), or (i)(1)(iii) of this AD; 
provided that the left flight deck side window or left flight deck 
windshield have not been subsequently replaced as specified in 
Bombardier AMM task 56-11-01-400-801, Revision 48, dated March 25, 
2015, or any previous revision of that task; or Bombardier AMM task 
56-12-01-400-801, Revision 48, dated March 25, 2015, or any previous 
revision of that task.
    (i) Bombardier Alert Service Bulletin A670BA-56-002, dated 
January 7, 2008.
    (ii) Bombardier Alert Service Bulletin A670BA-56-002, Revision 
A, dated February 26, 2008.
    (iii) Part A and Part C, as applicable, of the Accomplishment 
Instructions of Bombardier Service Bulletin 670BA-56-003, dated May 
28, 2015.
    (2) This paragraph provides credit for actions required by 
paragraph (h) of this AD, if those actions were performed before the 
effective date of this AD using the service information specified in 
paragraphs (i)(2)(i), (i)(2)(ii), or (i)(2)(iii) of this AD; 
provided that the right flight deck side window or right flight deck 
windshield have not been subsequently replaced as specified in 
Bombardier AMM task 56-11-01-400-801, Revision 48, dated March 25, 
2015, or any previous revision of that task; or Bombardier AMM task 
56-12-01-400-801, Revision 48, dated March 25, 2015, or any previous 
revision of that task.
    (i) Bombardier Alert Service Bulletin A670BA-56-002, dated 
January 7, 2008.
    (ii) Bombardier Alert Service Bulletin A670BA-56-002, Revision 
A, dated February 26, 2008.
    (iii) Part B and Part D, as applicable, of the Accomplishment 
Instructions of Bombardier Service Bulletin 670BA-56-003, dated May 
28, 2015.

(j) Parts Installation Limitations

    (1) As of the effective date of this AD, no person may install 
on any airplane a left or right flight deck windshield as specified 
in Bombardier AMM task 56-11-01-400-801, Revision 48, dated March 
25, 2015, or any previous revision of that task.
    (2) As of the effective date of this AD, no person may install 
on any airplane a left or right flight deck side window as specified 
in Bombardier AMM task 56-12-01-400-801, Revision 48, dated March 
25, 2015, or any previous revision of that task.

(k) Other FAA AD Provisions

    The following provisions also apply to this AD:
    (1) Alternative Methods of Compliance (AMOCs): The Manager, New 
York ACO Branch, FAA, has the authority to approve AMOCs for this 
AD, if requested using the procedures found in 14 CFR 39.19. In 
accordance with 14 CFR 39.19, send your request to your principal 
inspector or local Flight Standards District Office, as appropriate. 
If sending information directly to the manager of the certification 
office, send it to ATTN: Program Manager, Continuing Operational 
Safety, FAA, New York ACO Branch, 1600 Stewart Avenue, Suite 410, 
Westbury, NY 11590; telephone 516-228-7300; fax 516-794-5531. Before 
using any approved AMOC, notify your appropriate principal 
inspector, or lacking a principal inspector, the manager of the 
local flight standards district office/certificate holding district 
office.
    (2) Contacting the Manufacturer: For any requirement in this AD 
to obtain corrective actions from a manufacturer, the action must be 
accomplished using a method approved by the Manager, New York ACO 
Branch, FAA; or Transport Canada Civil Aviation (TCCA); or 
Bombardier, Inc.'s TCCA Design Approval Organization (DAO). If 
approved by the DAO, the approval must include the DAO-authorized 
signature.

 (l) Related Information

    (1) Refer to Mandatory Continuing Airworthiness Information 
(MCAI) Canadian Airworthiness Directive CF-2017-28, dated August 23, 
2017, for related information. This MCAI may be found in the AD 
docket on the internet at <a href="http://www.regulations.gov">http://www.regulations.gov</a> by searching 
for and locating Docket No. FAA-2017-1025.
    (2) For more information about this AD, contact Steven 
Dzierzynski, Aerospace Engineer, Avionics and Administrative 
Services Section, FAA, New York ACO Branch, 1600 Stewart Avenue, 
Suite 410, Westbury, NY 11590; telephone 516-228-7367; fax 516-794-
5531.
    (3) Service information identified in this AD that is not 
incorporated by reference is available at the addresses specified in 
paragraphs (m)(3) and (m)(4) of this AD.

 (m) Material Incorporated by Reference

    (1) The Director of the Federal Register approved the 
incorporation by reference (IBR) of the service information listed 
in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
    (2) You must use this service information as applicable to do 
the actions required by this AD, unless this AD specifies otherwise.
    (i) Bombardier Service Bulletin 670BA-56-003, Revision A, dated 
April 13, 2016.
    (ii) Reserved.
    (3) For service information identified in this AD, contact 
Bombardier, Inc., 400 C[ocirc]te-Vertu Road West, Dorval, 
Qu[eacute]bec H4S 1Y9, Canada; Widebody Customer Response Center 
North America toll-free telephone 1-866-538-1247 or direct-dial 
telephone 1-514-855-2999; fax 514-855-7401; email 
<a href="/cdn-cgi/l/email-protection#96f7f5b8efe3fad6f7f3e4f9b8f4f9fbf4f7e4f2fff3e4b8f5f9fb"><span class="__cf_email__" data-cfemail="aacbc984d3dfc6eacbcfd8c584c8c5c7c8cbd8cec3cfd884c9c5c7">[email&#160;protected]</span></a>; internet <a href="http://www.bombardier.com">http://www.bombardier.com</a>.

[[Page 7975]]

    (4) You may view this service information at the FAA, Transport 
Standards Branch, 1601 Lind Avenue SW, Renton, WA. For information 
on the availability of this material at the FAA, call 425-227-1221.
    (5) You may view this service information that is incorporated 
by reference at the National Archives and Records Administration 
(NARA). For information on the availability of this material at 
NARA, call 202-741-6030, or go to: <a href="http://www.archives.gov/federal-register/cfr/ibr-locations.html">http://www.archives.gov/federal-register/cfr/ibr-locations.html</a>.

    Issued in Renton, Washington, on February 9, 2018.
Michael Kaszycki,
Acting Director, System Oversight Division, Aircraft Certification 
Service.
[FR Doc. 2018-03438 Filed 2-22-18; 8:45 am]
 BILLING CODE 4910-13-P