AD 2017-18-09
Recurring
final rule
Applicability
| Type | Manufacturer | Model | Details |
|---|---|---|---|
| aircraft | Airbus Defense and Space S.A. | C-295 | Airworthiness Directives; Airbus Defense and Space S.A. (Formerly Known as Construcciones Aeronauticas, S.A.) Airplanes |
| aircraft | Airbus Defense and Space S.A. | CN-235 | Airworthiness Directives; Airbus Defense and Space S.A. (Formerly Known as Construcciones Aeronauticas, S.A.) Airplanes |
| aircraft | Airbus Defense and Space S.A. | CN-235-100 | Airworthiness Directives; Airbus Defense and Space S.A. (Formerly Known as Construcciones Aeronauticas, S.A.) Airplanes |
| aircraft | Airbus Defense and Space S.A. | CN-235-200 | Airworthiness Directives; Airbus Defense and Space S.A. (Formerly Known as Construcciones Aeronauticas, S.A.) Airplanes |
| aircraft | Airbus Defense and Space S.A. | CN-235-300 | Airworthiness Directives; Airbus Defense and Space S.A. (Formerly Known as Construcciones Aeronauticas, S.A.) Airplanes |
Unsafe Condition
Excessive play between bushings and their respective fitting housings at certain elevator fittings, which could lead to failure or detachment of affected structural parts, possibly resulting in reduced control of the airplane.
AI-generated summary from the source AD text. Verify against the official source before acting.
Required Actions
Perform a one-time detailed inspection and repetitive eddy current inspections of the elevator hinge fitting and bracket assembly. Take corrective actions if necessary.
AI-generated summary from the source AD text. Verify against the official source before acting.
Compliance Time
Before further flight
AI-generated summary from the source AD text. Verify against the official source before acting.
Affected Aircraft
Airbus Defense and Space S.A. Model CN-235, CN-235-100, CN-235-200, CN-235-300, and C-295 airplanes.
AI-generated summary from the source AD text. Verify against the official source before acting.
Federal Register Abstract
We are adopting a new airworthiness directive (AD) for all Airbus Defense and Space S.A. Model CN-235, CN-235-100, CN-235-200, CN- 235-300, and C-295 airplanes. This AD was prompted by reports of excessive play between bushings and their respective fitting housings at certain elevator fittings. This AD requires a one-time detailed inspection and repetitive eddy current inspections of the elevator hinge fitting and bracket assembly, and corrective actions if necessary. We are issuing this AD to address the unsafe condition on these products.
Applicability Source Text
Show captured applicability text from the source AD
(c) Applicability
This AD applies to Airbus Defense and Space S.A. (formerly known
as Construcciones Aeronauticas, S.A.) Model CN-235, CN-235-100, CN-
235-200, CN-235-300, and C-295 airplanes, certificated in any
category, all manufacturer serial numbers.
Document Text
Show stored source text (verify against official source)
[Federal Register Volume 82, Number 170 (Tuesday, September 5, 2017)]
[Rules and Regulations]
[Pages 41878-41883]
From the Federal Register Online via the Government Publishing Office [<a href="http://www.gpo.gov">www.gpo.gov</a>]
[FR Doc No: 2017-18396]
[[Page 41878]]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-2016-9521; Product Identifier 2016-NM-061-AD; Amendment
39-19018; AD 2017-18-09]
RIN 2120-AA64
Airworthiness Directives; Airbus Defense and Space S.A. (Formerly
Known as Construcciones Aeronauticas, S.A.) Airplanes
AGENCY: Federal Aviation Administration (FAA), Department of
Transportation (DOT).
ACTION: Final rule.
-----------------------------------------------------------------------
SUMMARY: We are adopting a new airworthiness directive (AD) for all
Airbus Defense and Space S.A. Model CN-235, CN-235-100, CN-235-200, CN-
235-300, and C-295 airplanes. This AD was prompted by reports of
excessive play between bushings and their respective fitting housings
at certain elevator fittings. This AD requires a one-time detailed
inspection and repetitive eddy current inspections of the elevator
hinge fitting and bracket assembly, and corrective actions if
necessary. We are issuing this AD to address the unsafe condition on
these products.
DATES: This AD is effective October 10, 2017.
The Director of the Federal Register approved the incorporation by
reference of certain publications listed in this AD as of October 10,
2017.
ADDRESSES: For service information identified in this final rule,
contact Airbus Defense and Space, Services/Engineering Support, Avenida
de Arag[oacute]n 404, 28022 Madrid, Spain; fax +34 91 585 31 27; email
<a href="/cdn-cgi/l/email-protection#ce839a8fe09aabada6a0a7adafa29dabbcb8a7adab8eafa7bcacbbbde0ada1a3"><span class="__cf_email__" data-cfemail="28657c69067c4d4b4046414b49447b4d5a5e414b4d6849415a4a5d5b064b4745">[email protected]</span></a>. You may view this referenced service
information at the FAA, Transport Standards Branch, 1601 Lind Avenue
SW., Renton, WA. For information on the availability of this material
at the FAA, call 425-227-1221. It is also available on the Internet at
<a href="http://www.regulations.gov">http://www.regulations.gov</a> by searching for and locating Docket No.
FAA-2016-9521.
Examining the AD Docket
You may examine the AD docket on the Internet at <a href="http://www.regulations.gov">http://www.regulations.gov</a> by searching for and locating Docket No. FAA-2016-
9521; or in person at the Docket Management Facility between 9 a.m. and
5 p.m., Monday through Friday, except Federal holidays. The AD docket
contains this AD, the regulatory evaluation, any comments received, and
other information. The street address for the Docket Office (telephone
800-647-5527) is Docket Management Facility, U.S. Department of
Transportation, Docket Operations, M-30, West Building Ground Floor,
Room W12-140, 1200 New Jersey Avenue SE., Washington, DC 20590.
FOR FURTHER INFORMATION CONTACT: Shahram Daneshmandi, Aerospace
Engineer, International Section, Transport Standards Branch, FAA, 1601
Lind Avenue SW., Renton, WA 98057-3356; telephone: 425-227-1112; fax:
425-227-1149.
SUPPLEMENTARY INFORMATION:
Discussion
We issued a notice of proposed rulemaking (NPRM) to amend 14 CFR
part 39 by adding an AD that would apply to all Airbus Defense and
Space S.A. Model CN-235, CN-235-100, CN-235-200, CN-235-300, and C-295
airplanes. The NPRM published in the Federal Register on January 5,
2017 (82 FR 1269) (``the NPRM''). The NPRM was prompted by reports of
excessive play between bushings and their respective fitting housings
at certain elevator fittings. The NPRM proposed to require a one-time
detailed inspection and repetitive eddy current inspections of the
elevator hinge fitting and bracket assembly, and corrective actions if
necessary. We are issuing this AD to prevent excessive play between
bushings and their respective fitting housings, which could lead to
failure or detachment of any of the affected structural parts, with a
possible result of reduced control of the airplane.
The European Aviation Safety Agency (EASA), which is the Technical
Agent for the Member States of the European Union, has issued EASA AD
2016-0075, dated April 19, 2016 (referred to after this as the
Mandatory Continuing Airworthiness Information, or ``the MCAI''), to
correct an unsafe condition for all Airbus Defense and Space S.A. Model
CN-235, CN-235-100, CN-235-200, CN-235-300, and C-295 airplanes. The
MCAI states:
Excessive play between bushings and their respective fitting
housing was reported at Stabilizer Station (STA) 4850, affecting the
outboard and inboard elevator hinge fittings and attachment
fittings; and the horizontal stabilizer elevator linkage.
Additionally, excessive misalignment was detected between the
elevator hinge fittings and the elevator brackets during further
analysis of the reported cases. Furthermore, an occurrence of an
elevator hinge fitting crack was reported.
This condition, if not detected and corrected, could lead to
failure or detachment of any of the affected structural parts,
possibly resulting in reduced control of the aeroplane.
To address this potentially unsafe condition, Airbus Defence &
Space (D&S) issued Alert Operator Transmissions (AOT) AOT-CN235-55-
0001 Revision 2 and AOT-C295-55-0001 Revision 2 to provide
inspection instructions to detect misalignment between the elevator
hinge fittings and the elevator brackets. Additionally, Airbus D&S
issued AOT-CN235-55-0003 and AOT-C295-55-0003 to provide inspection
instructions to detect cracking of elevator hinge fitting and
attachment fitting.
For the reasons described above, this [EASA] AD requires a one-
time [detailed] inspection of the elevator hinge fittings and the
elevator brackets, repetitive [eddy current] inspections of elevator
hinge fittings and attachment fittings, and depending on findings,
accomplishment of applicable corrective action(s) [e.g. repair(s)].
You may examine the MCAI in the AD docket on the Internet at <a href="http://www.regulations.gov">http://www.regulations.gov</a> by searching for and locating Docket No. FAA-2016-
9521.
Comments
We gave the public the opportunity to participate in developing
this AD. We received no comments on the NPRM or on the determination of
the cost to the public.
Conclusion
We reviewed the relevant data and determined that air safety and
the public interest require adopting this AD as proposed, except for
minor editorial changes. We have determined that these minor changes:
<bullet> Are consistent with the intent that was proposed in the
NPRM for correcting the unsafe condition; and
<bullet> Do not add any additional burden upon the public than was
already proposed in the NPRM.
Related Service Information Under 1 CFR Part 51
Airbus Defense and Space S.A. has issued the following Alert
Operators Transmissions (AOT).
<bullet> Airbus Defense and Space S.A. AOT AOT-CN235-55-0001,
Revision 2, dated March 10, 2015. The service information describes
procedures for a detailed visual inspection of the elevator hinge
fitting and bracket assembly to detect excessive play between bushings
and their respective fitting housings, and to detect cracks; and
corrective actions if necessary.
<bullet> Airbus Defense and Space S.A. AOT AOT-CN235-55-0003, dated
December 22, 2015. The service
[[Page 41879]]
information describes procedures for repetitive eddy current
inspections to detect cracks in the elevator hinge fitting and bracket
assembly, and corrective actions if necessary.
<bullet> Airbus Defense and Space S.A. AOT AOT-C295-55-0001,
Revision 2, dated April 9, 2015. The service information describes
procedures for a detailed visual inspection of the elevator hinge
fitting and bracket assembly to detect excessive play between bushings
and their respective fitting housings, and to detect cracks; and
corrective actions if necessary.
<bullet> Airbus Defense and Space S.A. AOT AOT-C295-55-0003, dated
December 22, 2015. The service information describes procedures for
repetitive eddy current inspections to detect cracks in the elevator
hinge fitting and bracket assembly, and corrective actions if
necessary.
These documents are distinct since they apply to different airplane
models in different configurations. This service information is
reasonably available because the interested parties have access to it
through their normal course of business or by the means identified in
the ADDRESSES section.
Costs of Compliance
We estimate that this AD affects 14 airplanes of U.S. registry.
We estimate the following costs to comply with this AD:
Estimated Costs
----------------------------------------------------------------------------------------------------------------
Cost on U.S.
Action Labor cost Parts cost Cost per product operators
----------------------------------------------------------------------------------------------------------------
Inspection........................ 2 work-hours x $85 $0 $170 per inspection $2,380 per
per hour = $170 per cycle. inspection cycle.
inspection cycle.
----------------------------------------------------------------------------------------------------------------
We estimate the following costs to do any necessary repairs that
will be required based on the results of the inspection. We have no way
of determining the number of airplanes that might need this repair:
On-Condition Costs
----------------------------------------------------------------------------------------------------------------
Cost per
Action Labor cost Parts cost product
----------------------------------------------------------------------------------------------------------------
Repair....................................... 45 work-hours x $85 per hour = $10,000 $13,825
$3,825.
----------------------------------------------------------------------------------------------------------------
Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to
issue rules on aviation safety. Subtitle I, section 106, describes the
authority of the FAA Administrator. ``Subtitle VII: Aviation
Programs,'' describes in more detail the scope of the Agency's
authority.
We are issuing this rulemaking under the authority described in
``Subtitle VII, Part A, Subpart III, Section 44701: General
requirements.'' Under that section, Congress charges the FAA with
promoting safe flight of civil aircraft in air commerce by prescribing
regulations for practices, methods, and procedures the Administrator
finds necessary for safety in air commerce. This regulation is within
the scope of that authority because it addresses an unsafe condition
that is likely to exist or develop on products identified in this
rulemaking action.
This AD is issued in accordance with authority delegated by the
Executive Director, Aircraft Certification Service, as authorized by
FAA Order 8000.51C. In accordance with that order, issuance of ADs is
normally a function of the Compliance and Airworthiness Division, but
during this transition period, the Executive Director has delegated the
authority to issue ADs applicable to transport category airplanes to
the Director of the System Oversight Division.
Regulatory Findings
We determined that this AD will not have federalism implications
under Executive Order 13132. This AD will not have a substantial direct
effect on the States, on the relationship between the national
government and the States, or on the distribution of power and
responsibilities among the various levels of government.
For the reasons discussed above, I certify that this AD:
1. Is not a ``significant regulatory action'' under Executive Order
12866;
2. Is not a ``significant rule'' under the DOT Regulatory Policies
and Procedures (44 FR 11034, February 26, 1979);
3. Will not affect intrastate aviation in Alaska; and
4. Will not have a significant economic impact, positive or
negative, on a substantial number of small entities under the criteria
of the Regulatory Flexibility Act.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by
reference, Safety.
Adoption of the Amendment
Accordingly, under the authority delegated to me by the
Administrator, the FAA amends 14 CFR part 39 as follows:
PART 39--AIRWORTHINESS DIRECTIVES
0
1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
Sec. 39.13 [Amended]
0
2. The FAA amends Sec. 39.13 by adding the following new airworthiness
directive (AD):
2017-18-09 Airbus Defense and Space S.A. (Formerly Known as
Construcciones Aeronauticas, S.A.): Amendment 39-19018; Docket No.
FAA-2016-9521; Product Identifier 2016-NM-061-AD.
(a) Effective Date
This AD is effective October 10, 2017.
(b) Affected ADs
None.
(c) Applicability
This AD applies to Airbus Defense and Space S.A. (formerly known
as Construcciones Aeronauticas, S.A.) Model CN-235, CN-235-100, CN-
235-200, CN-235-300, and C-295 airplanes, certificated in any
category, all manufacturer serial numbers.
(d) Subject
Air Transport Association (ATA) of America Code 55, Stabilizers.
[[Page 41880]]
(e) Reason
This AD was prompted by reports of excessive play between
bushings and their respective fitting housings at certain elevator
fittings. We are issuing this AD to prevent excessive play between
bushings and their respective fitting housings, which could lead to
failure or detachment of any of the affected structural parts, with
a possible result of reduced control of the airplane.
(f) Compliance
Comply with this AD within the compliance times specified,
unless already done.
(g) One-Time Detailed Visual Inspection
Before exceeding 600 flight hours since first flight of the
airplane, or within 300 flight hours after the effective date of
this AD, whichever occurs later, but not before exceeding 300 flight
hours since first flight of the airplane: Do a detailed visual
inspection of the elevator hinge fitting and bracket assembly to
detect excessive play between bushings and their respective fitting
housings, and to detect cracks, in accordance with the instructions
of Airbus Defense and Space S.A. Alert Operators Transmission (AOT)
AOT-CN235-55-0001, Revision 2, dated March 10, 2015; or AOT AOT-
C295-55-0001, Revision 2, dated April 9, 2015; as applicable.
(h) Corrective Action for Discrepancies Found During Detailed Visual
Inspection
If, during the inspection required by paragraph (g) of this AD,
any discrepancy is detected, as defined in the instructions of
Airbus Defense and Space S.A. AOT AOT-CN235-55-0001, Revision 2,
dated March 10, 2015; or AOT AOT-C295-55-0001 Revision 2, dated
April 9, 2015; as applicable: Before further flight, accomplish
applicable corrective actions, in accordance with the instructions
of Airbus Defense and Space S.A. AOT AOT-CN235-55-0001, Revision 2,
dated March 10, 2015; or AOT AOT-C295-55-0001, Revision 2, dated
April 9, 2015; as applicable. Where Airbus Defense and Space S.A.
AOT AOT-CN235-55-0001, Revision 2, dated March 10, 2015; or AOT AOT-
C295-55-0001 Revision 2, dated April 9, 2015; specifies to contact
Airbus Defense and Space S.A. for corrective actions, before further
flight, accomplish corrective actions in accordance with the
procedures specified in paragraph (n)(2) of this AD.
(i) Repetitive Eddy Current Inspections--Model CN-235, CN-235-100, CN-
235-200, and CN-235-300 Airplanes
For Model CN-235, CN-235-100, CN-235-200, and CN-235-300
airplanes: Do the actions required by paragraphs (i)(1) and (i)(2)
of this AD.
(1) Within the applicable compliance time specified in table 1
to paragraph (i)(1) of this AD: Do an eddy current inspection to
detect cracks in the elevator hinge fitting and bracket assembly, in
accordance with the instructions of Airbus Defense and Space S.A.
AOT AOT-CN235-55-0003, dated December 22, 2015.
Table 1 to Paragraph (i)(1) of This AD--Initial Compliance Times for Model CN-235, CN-235-100, CN-235-200, and
CN-235-300 Airplanes
----------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------
Manufacturer's Serial No. Elevator hinge fitting Compliance time for initial eddy current
inspection
(MSN) (part No.) (whichever occurs later)
----------------------------------------------------------------------------------------------------------------
MSN001 through MSN154 inclusive.... 35-31193-0201 Before exceeding 8,800 Within 300 flight
35-31193-0202 flight cycles since first cycles after the
flight of the airplane; or effective date of
before exceeding the this AD.
applicable flight hours
since first flight of the
airplane as calculated in
table 2 to paragraph
(i)(1) of this AD;
whichever occurs first.
MSN155 through MSN241 inclusive.... 35-31193-0501 Before exceeding 3,600 Within 300 flight
35-31193-0502 flight cycles since first cycles after the
flight of the airplane; or effective date of
before exceeding the this AD.
applicable flight hours
since first flight of the
airplane as calculated in
table 2 to paragraph
(i)(1) of this AD;
whichever occurs first.
MSN242 through MSN999 inclusive.... 35-31193-0503 Before exceeding 1,000 Within 50 flight
35-31193-0504 flight cycles since first cycles after the
flight of the airplane; or effective date of
before exceeding the this AD.
applicable flight hours
since first flight of the
airplane as calculated in
table 2 to paragraph
(i)(1) of this AD;
whichever occurs first.
----------------------------------------------------------------------------------------------------------------
Table 2 to Paragraph (i)(1) of This AD--Flight Cycles to Flight Hours
Conversion Since First Flight of the Airplane
------------------------------------------------------------------------
Civilian or Flight cycles to
CN-235 Model/version military type flight hours
certificate conversion
------------------------------------------------------------------------
CN-235 (Commercial Civilian......... Flight hours since
Identification S10). first flight of the
airplane = the
applicable flight
cycles from table 1
to paragraph (i)(1)
of this AD x 0.861.
CN-235-100.................... Civilian......... Flight hours since
first flight of the
airplane = the
applicable flight
cycles from table 1
to paragraph (i)(1)
of this AD x 0.861.
CN-235-200.................... Civilian......... Flight hours since
first flight of the
airplane = the
applicable flight
cycles from table 1
to paragraph (i)(1)
of this AD x 0.806.
CN-235-300.................... Civilian......... Flight hours since
first flight of the
airplane = the
applicable flight
cycles from table 1
to paragraph (i)(1)
of this AD x 0.861.
CN-235 (Commercial Military......... Flight hours since
Identification S10M). first flight of the
airplane = the
applicable flight
cycles from table 1
to paragraph (i)(1)
of this AD x 0.861.
CN-235-100M................... Military......... Flight hours since
first flight of the
airplane = the
applicable flight
cycles from table 1
to paragraph (i)(1)
of this AD x 2.222.
CN-235-200M................... Military......... Flight hours since
first flight of the
airplane = the
applicable flight
cycles from table 1
to paragraph (i)(1)
of this AD x 2.222.
CN-235-300M................... Military......... Flight hours since
first flight of the
airplane = the
applicable flight
cycles from table 1
to paragraph (i)(1)
of this AD x 2.167.
CN-235-100M/IR01.............. Military......... Flight hours since
first flight of the
airplane = the
applicable flight
cycles from table 1
to paragraph (i)(1)
of this AD x 1.389.
CN-235-100M/EA02V............. Military......... Flight hours since
first flight of the
airplane = the
applicable flight
cycles from table 1
to paragraph (i)(1)
of this AD x 1.389.
[[Page 41881]]
CN-235-200M/CL02.............. Military......... Flight hours since
first flight of the
airplane = the
applicable flight
cycles from table 1
to paragraph (i)(1)
of this AD x 1.389.
CN-235/EA01F (Commercial Military......... Flight hours since
Identification S10M). first flight of the
airplane = the
applicable flight
cycles from table 1
to paragraph (i)(1)
of this AD x 0.861.
CN-235-300/SM01............... Civilian......... Flight hours since
first flight of the
airplane = the
applicable flight
cycles from table 1
to paragraph (i)(1)
of this AD x 3.125.
CN-235 -300M/CG01, -300M/GC01, Military......... Flight hours since
-300/MM01, -300/CL04. first flight of the
airplane = the
applicable flight
cycles from table 1
to paragraph (i)(1)
of this AD x 3.125.
------------------------------------------------------------------------
(2) Repeat the eddy current inspection specified in paragraph
(i)(1) of this AD thereafter within the applicable interval
specified in table 3 to paragraph (i)(2) of this AD.
Table 3 to Paragraph (i)(2) of This AD--Repetitive Inspection Intervals
------------------------------------------------------------------------
Elevator Compliance time for
Manufacturer's serial No. attachment repetitive eddy
fitting (P/N) current inspections
------------------------------------------------------------------------
MSN001 through MSN154 35-31193-0201 Before exceeding
inclusive. 35-31193-0202 1,300 flight cycles
since the most
recent inspection;
or before exceeding
the applicable
flight hours since
the most recent
inspection as
calculated in table
4 to paragraph
(i)(2) of this AD;
whichever occurs
first.
MSN155 through MSN241 35-31193-0501 Before exceeding
inclusive. 35-31193-0502 1,000 flight cycles
since the most
recent inspection;
or before exceeding
the applicable
flight hours since
the most recent
inspection as
calculated in table
4 to paragraph
(i)(2) of this AD;
whichever occurs
first.
MSN242 through MSN999 35-31193-0503 Before exceeding
inclusive. 35-31193-0504 1,000 flight cycles
since the most
recent inspection;
or before exceeding
the applicable
flight hours since
the most recent
inspection as
calculated in table
4 to paragraph
(i)(2) of this AD;
whichever occurs
first.
------------------------------------------------------------------------
Table 4 to Paragraph (i)(2) of This AD--Flight Cycles to Flight Hours
Conversion for Repetitive Inspections
------------------------------------------------------------------------
Civilian or Flight cycles to
CN-235 Model/version military type flight hours
certificate conversion
------------------------------------------------------------------------
CN-235 (Commercial Civilian......... Flight hours since
Identification S10). most recent
inspection = the
applicable flight
cycles from table 3
to paragraph (i)(2)
of this AD x 0.861.
CN-235-100.................... Civilian......... Flight hours since
most recent
inspection = the
applicable flight
cycles from table 3
to paragraph (i)(2)
of this AD x 0.861.
CN-235-200.................... Civilian......... Flight hours since
most recent
inspection = the
applicable flight
cycles from table 3
to paragraph (i)(2)
of this AD x 0.806.
CN-235-300.................... Civilian......... Flight hours since
first flight of the
airplane = the
applicable flight
cycles from table 3
to paragraph (i)(2)
of this AD x 0.861.
CN-235 (Commercial Military......... Flight hours since
Identification S10M). most recent
inspection = the
applicable flight
cycles from table 3
to paragraph (i)(2)
of this AD x 0.861.
CN-235-100M................... Military......... Flight hours since
most recent
inspection = the
applicable flight
cycles from table 3
to paragraph (i)(2)
of this AD x 2.222.
CN-235-200M................... Military......... Flight hours since
most recent
inspection = the
applicable flight
cycles from table 3
to paragraph (i)(2)
of this AD x 2.222.
CN-235-300M................... Military......... Flight hours since
most recent
inspection = the
applicable flight
cycles from table 3
to paragraph (i)(2)
of this AD x 2.167.
CN-235-100M/IR01.............. Military......... Flight hours since
most recent
inspection = the
applicable flight
cycles from table 3
to paragraph (i)(2)
of this AD x 1.389.
CN-235-100M/EA02V............. Military......... Flight hours since
most recent
inspection = the
applicable flight
cycles from table 3
to paragraph (i)(2)
of this AD x 1.389.
CN-235-200M/CL02.............. Military......... Flight hours since
most recent
inspection = the
applicable flight
cycles from table 3
to paragraph (i)(2)
of this AD x 1.389.
CN-235/EA01F (Commercial Military......... Flight hours since
Identification S10M). most recent
inspection = the
applicable flight
cycles from table 3
to paragraph (i)(2)
of this AD x 0.861.
CN-235-300/SM01............... Civilian......... Flight hours since
most recent
inspection = the
applicable flight
cycles from table 3
to paragraph (i)(2)
of this AD x 3.125.
CN-235 -300M/CG01, -300M/GC01, Military......... Flight hours since
-300/MM01, -300/CL04. most recent
inspection = the
applicable flight
cycles from table 3
to paragraph (i)(2)
of this AD x 3.125.
------------------------------------------------------------------------
[[Page 41882]]
(j) Repetitive Eddy Current Inspections--Model C-295 Airplanes
For Model C-295 airplanes: Do the actions required by paragraphs
(j)(1) and (j)(2) of this AD.
(1) At the later of the times specified in table 5 to paragraph
(j)(1) of this AD: Do an eddy current inspection of the elevator
hinge fitting and attachment fitting to detect cracks, in accordance
with the instructions of Airbus Defense and Space S.A. AOT AOT-C295-
55-0003, dated December 22, 2015.
Table 5 to Paragraph (j)(1) of This AD--Initial Compliance Times for Model C-295 Airplanes
----------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------
C-295 Model/Version Manufacturer's Elevator Hinge Compliance time for initial eddy current
Serial Number. Fitting inspection
(MSN)............ (Part Number) (whichever occurs later)
----------------------------------------------------------------------------------------------------------------
C-295M/ EA03(01-10), RJ01 (01- MSN001 through 95-31193-0501 Since first flight of Within 300 flight
02), PO01(01-08), AG01(01-06), MSN030 inclusive. 95-31193-0502 the airplane: Before cycles after the
BR01(01-03). exceeding 3,600 effective date
flight cycles; or of this AD.
before exceeding
5,040 flight hours;
whichever occurs
first.
C-295M (from MSN 031).......... MSN031 through 95-31193-0503 Since first flight of Within 50 flight
MSN999 inclusive. 95-31193-0504 the airplane: Before cycles after the
exceeding 1,000 effective date
flight cycles; or of this AD.
before exceeding
1,400 flight hours;
whichever occurs
first.
C-295M/FI01, FI02.............. MSN031 through 95-31193-0503 Since first flight of Within 50 flight
MSN999 inclusive. 95-31193-0504 the airplane: Before cycles after the
exceeding 1,000 effective date
flight cycles; or of this AD.
before exceeding
1,000 flight hours;
whichever occurs
first.
C-295M/PG01.................... MSN031 through 95-31193-0503 Since first flight of Within 50 flight
MSN999 inclusive. 95-31193-0504 the airplane: Before cycles after the
exceeding 1,000 effective date
flight cycles; or of this AD.
before exceeding
1,400 flight hours;
whichever occurs
first.
C-295M/PG02, PG03.............. MSN031 through 95-31193-0503 Since first flight of Within 50 flight
MSN999 inclusive. 95-31193-0504 the airplane: Before cycles after the
exceeding 1,000 effective date
flight cycles; or of this AD.
before exceeding
1,900 flight hours;
whichever occurs
first.
C-295M/CH01.................... MSN031 through 95-31193-0503 Since first flight of Within 50 flight
MSN999 inclusive. 95-31193-0504 the airplane: Before cycles after the
exceeding 1,000 effective date
flight cycles; or of this AD.
before exceeding
1,200 flight hours;
whichever occurs
first.
C-295M/CH02, OM03.............. MSN031 through 95-31193-0503 Since first flight of Within 50 flight
MSN999 inclusive. 95-31193-0504 the airplane: Before cycles after the
exceeding 1,000 effective date
flight cycles; or of this AD.
before exceeding
1,500 flight hours;
whichever occurs
first.
C-295MW........................ MSN031 through 95-31193-0503 Since first flight of Within 50 flight
MSN999 inclusive. 95-31193-0504 the airplane: Before cycles after the
exceeding 1,000 effective date
flight cycles; or of this AD.
before exceeding
1,400 flight hours;
whichever occurs
first.
----------------------------------------------------------------------------------------------------------------
(2) Repeat the eddy current inspection specified in paragraph
(j)(1) of this AD thereafter within the applicable interval
specified in table 6 to paragraph (j)(2) of this AD.
Table 6 to Paragraph (j)(2) of This AD--Repetitive Inspection Intervals for Model C-295 Airplanes
----------------------------------------------------------------------------------------------------------------
Elevator hinge Compliance time for
C-295 Model/version Manufacturer's serial fitting (part repetitive eddy current
No. (MSN) number) inspections
----------------------------------------------------------------------------------------------------------------
C-295M/ EA03(01-10), RJ01 (01-02), MSN001 through MSN030 95-31193-0501 Before exceeding 1,000
PO01(01-08), AG01(01-06), BR01(01- inclusive. 95-31193-0502 flight cycles since the
03). most recent inspection; or
before exceeding 1,400
flight hours since the most
recent inspection;
whichever occurs first.
C-295M (from MSN 031)................ MSN031 through MSN999 95-31193-0503 Before exceeding 1,000
inclusive. 95-31193-0504 flight cycles since the
most recent inspection; or
before exceeding 1,400
flight hours since the most
recent inspection;
whichever occurs first.
C-295M/FI01, FI02.................... MSN031 through MSN999 95-31193-0503 Before exceeding 1,000
inclusive. 95-31193-0504 flight cycles since the
most recent inspection; or
before exceeding 1,000
flight hours since the most
recent inspection;
whichever occurs first.
C-295M/PG01.......................... MSN031 through MSN999 95-31193-0503 Before exceeding 1,000
inclusive. 95-31193-0504 flight cycles since the
most recent inspection; or
before exceeding 1,400
flight hours since the most
recent inspection;
whichever occurs first.
C-295M/PG02, PG03.................... MSN031 through MSN999 95-31193-0503 Before exceeding 1,000
inclusive. 95-31193-0504 flight cycles since the
most recent inspection; or
before exceeding 1,900
flight hours since the most
recent inspection;
whichever occurs first.
[[Page 41883]]
C-295M/CH01.......................... MSN031 through MSN999 95-31193-0503 Before exceeding 1,000
inclusive. 95-31193-0504 flight cycles since the
most recent inspection; or
before exceeding 1,200
flight hours since the most
recent inspection;
whichever occurs first.
C-295M/CH02, OM03.................... MSN031 through MSN999 95-31193-0503 Before exceeding 1,000
inclusive. 95-31193-0504 flight cycles since the
most recent inspection; or
before exceeding 1,500
flight hours since the most
recent inspection;
whichever occurs first.
C-295MW.............................. MSN031 through MSN999 95-31193-0503 Before exceeding 1,000
inclusive. 95-31193-0504 flight cycles since the
most recent inspection; or
before exceeding 1,400
flight hours since the most
recent inspection;
whichever occurs first.
----------------------------------------------------------------------------------------------------------------
(k) Corrective Action for Discrepancies Found During Eddy Current
Inspection
If, during any inspection required by paragraph (i)(1), (i)(2),
(j)(1), or (j)(2) of this AD, any crack is detected, as defined in
Airbus Defense and Space S.A. AOT AOT-CN235-55-0003, dated December
22, 2015; or AOT AOT-C295-55-0003, dated December 22, 2015; as
applicable: Before further flight, accomplish applicable corrective
actions in accordance with the instructions of Airbus Defense and
Space S.A. AOT AOT-CN235-55-0003, dated December 22, 2015; or AOT
AOT-C295-55-0003, dated December 22, 2015; as applicable. Where
Airbus Defense and Space S.A. AOT AOT-CN235-55-0003, dated December
22, 2015; or AOT AOT-C295-55-0003, dated December 22, 2015;
specifies to contact Airbus Defense and Space S.A. for corrective
actions, before further flight, accomplish corrective actions in
accordance with the procedures specified in paragraph (n)(2) of this
AD.
(l) Provision Regarding Terminating Action
Accomplishing corrective actions, as required by paragraph (k)
of this AD, does not constitute terminating action for the
repetitive inspections required by paragraphs (i)(2) and (j)(2) of
this AD, unless explicitly stated in the approved method of
compliance for the corrective action.
(m) Credit for Previous Actions
This paragraph provides credit for the actions required by
paragraph (g) of this AD, if those actions were performed before the
effective date of this AD using Airbus Defense and Space S.A. AOT
AOT-CN235-55-0001, Revision 1, dated March 6, 2015; or AOT AOT-C295-
55-0001, Revision 1, dated May 29, 2014.
(n) Other FAA AD Provisions
The following provisions also apply to this AD:
(1) Alternative Methods of Compliance (AMOCs): The Manager,
International Section, Transport Standards Branch, FAA, has the
authority to approve AMOCs for this AD, if requested using the
procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19,
send your request to your principal inspector or local Flight
Standards District Office, as appropriate. Before using any approved
AMOC, notify your appropriate principal inspector, or lacking a
principal inspector, the manager of the local flight standards
district office/certificate holding district office.
(2) Contacting the Manufacturer: For any requirement in this AD
to obtain corrective actions from a manufacturer, the action must be
accomplished using a method approved by the Manager, International
Section, Transport Standards Branch, FAA; or the European Aviation
Safety Agency (EASA); or Airbus Defense and Space S.A.'s EASA DOA.
If approved by the DOA, the approval must include the DOA-authorized
signature.
(o) Related Information
(1) Refer to Mandatory Continuing Airworthiness Information
(MCAI) EASA AD 2016-0075, dated April 19, 2016, for related
information. This MCAI may be found in the AD docket on the Internet
at <a href="http://www.regulations.gov">http://www.regulations.gov</a> by searching for and locating Docket
No. FAA-2016-9521.
(2) For more information about this AD, contact Shahram
Daneshmandi, Aerospace Engineer, International Section, Transport
Standards Branch, FAA, 1601 Lind Avenue SW., Renton, WA 98057-3356;
telephone: 425-227-1112; fax: 425-227-1149.
(3) Service information identified in this AD that is not
incorporated by reference is available at the addresses specified in
paragraphs (p)(3) and (p)(4) of this AD.
(p) Material Incorporated by Reference
(1) The Director of the Federal Register approved the
incorporation by reference (IBR) of the service information listed
in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
(2) You must use this service information as applicable to do
the actions required by this AD, unless this AD specifies otherwise.
(i) Airbus Defense and Space S.A. Alert Operators Transmission
(AOT) AOT-CN235-55-0001, Revision 2, dated March 10, 2015.
(ii) Airbus Defense and Space S.A. AOT AOT-CN235-55-0003, dated
December 22, 2015.
(iii) Airbus Defense and Space S.A. AOT AOT-C295-55-0001,
Revision 2, dated April 9, 2015.
(iv) Airbus Defense and Space S.A. AOT AOT-C295-55-0003, dated
December 22, 2015.
(3) For service information identified in this AD, contact
Airbus Defense and Space, Services/Engineering Support, Avenida de
Arag[oacute]n 404, 28022 Madrid, Spain; fax +34 91 585 31 27; email
<a href="/cdn-cgi/l/email-protection#561b0217780233353e383f35373a053324203f353316373f243423257835393b"><span class="__cf_email__" data-cfemail="541900157a0031373c3a3d373538073126223d373114353d263621277a373b39">[email protected]</span></a>.
(4) You may view this service information at the FAA, Transport
Standards Branch, 1601 Lind Avenue SW., Renton, WA. For information
on the availability of this material at the FAA, call 425-227-1221.
(5) You may view this service information that is incorporated
by reference at the National Archives and Records Administration
(NARA). For information on the availability of this material at
NARA, call 202-741-6030, or go to: <a href="http://www.archives.gov/federal-register/cfr/ibr-locations.html">http://www.archives.gov/federal-register/cfr/ibr-locations.html</a>.
Issued in Renton, Washington, on August 22, 2017.
Dionne Palermo,
Acting Director, System Oversight Division, Aircraft Certification
Service.
[FR Doc. 2017-18396 Filed 9-1-17; 8:45 am]
BILLING CODE 4910-13-P
Source: Official FAA Source ↗
Retrieved: Apr 6, 2026
Rights: U.S. Government Public Domain
This site is not affiliated with or endorsed by the FAA. Always verify with official sources.
Related Airworthiness Directives
2024-24-04 Recurring
final ruleAirworthiness Directives; Airbus Defense and Space S.A. (Formerly Known as Construcciones Aeronauticas, S.A.) Airplanes
Unsafe Condition: cracking, which could lead to reduced structural integrity of the lugs on the horizontal stabilizer-to-fuselage rear attachment fittings
2023-25-11 Recurring
final ruleAirworthiness Directives; Airbus Defense and Space S.A. (Formerly Known as Construcciones Aeronauticas, S.A.) Airplanes
Unsafe Condition: Cracking or broken rivets of certain left- and right-hand stringers and surrounding structure, which could result in reduced structural integrity of the airplane.
2021-06-08 Recurring
final ruleAirworthiness Directives; Airbus Defense and Space S.A. (Formerly Known as Construcciones Aeronauticas, S.A.) Airplanes
Unsafe Condition: Leaks in a motorized fuel valve, which could lead to failure of the fuel valve and consequent improper fuel system functioning or, in case of the presence of an ignition source, an airplane fire.
2018-18-10 Recurring
final ruleAirworthiness Directives; Airbus Defense and Space S.A. (Formerly Known as Construcciones Aeronauticas, S.A.) Airplanes
Unsafe Condition: Cracks were found on the door mechanism actuator shaft assemblies of the nose landing gear (NLG), which could lead to an in-flight NLG door opening and possibly result in detachment of the affected...
