AD 2017-12-11

[Federal Register Volume 82, Number 114 (Thursday, June 15, 2017)]
[Rules and Regulations]
[Pages 27406-27408]
From the Federal Register Online via the Government Publishing Office [<a href="http://www.gpo.gov">www.gpo.gov</a>]
[FR Doc No: 2017-12169]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2016-9387; Directorate Identifier 2016-NM-182-AD; 
Amendment 39-18926; AD 2017-12-11]
RIN 2120-AA64


Airworthiness Directives; Bombardier, Inc., Airplanes

AGENCY: Federal Aviation Administration (FAA), Department of 
Transportation (DOT).

ACTION: Final rule.

-----------------------------------------------------------------------

SUMMARY: We are adopting a new airworthiness directive (AD) for certain 
Bombardier, Inc., Model BD-100-1A10 airplanes. This AD was prompted by 
a report that the equipment racks were not designed to support the 
actual weight of all the equipment and the secondary direct current 
power centers under all loading conditions. This AD requires modifying 
the equipment racks. We are issuing this AD to address the unsafe 
condition on these products.

DATES: This AD is effective July 20, 2017.
    The Director of the Federal Register approved the incorporation by 
reference of certain publications listed in this AD as of July 20, 
2017.

ADDRESSES: For service information identified in this final rule, 
contact Bombardier, Inc., 400 C[ocirc]te-Vertu Road West, Dorval, 
Qu[eacute]bec H4S 1Y9, Canada; telephone: 514-855-5000; fax: 514-855-
7401; email: <a href="/cdn-cgi/l/email-protection#96e2fef2b8f5e4fcd6f7f3e4f9b8f4f9fbf4f7e4f2fff3e4b8f5f9fb"><span class="__cf_email__" data-cfemail="a6d2cec288c5d4cce6c7c3d4c988c4c9cbc4c7d4c2cfc3d488c5c9cb">[email&#160;protected]</span></a>; Internet <a href="http://www.bombardier.com">http://www.bombardier.com</a>. You may view this referenced service information at 
the FAA, Transport Airplane Directorate, 1601 Lind Avenue SW., Renton, 
WA. For information on the availability of this material at the FAA, 
call 425-227-1221. It is also available on the Internet at <a href="http://www.regulations.gov">http://www.regulations.gov</a> by searching for and locating Docket No. FAA-2016-
9387.

Examining the AD Docket

    You may examine the AD docket on the Internet at <a href="http://www.regulations.gov">http://www.regulations.gov</a> by searching for and locating Docket No. FAA-2016-
9387; or in person at the Docket Management Facility between 9 a.m. and 
5 p.m., Monday through Friday, except Federal holidays. The AD docket 
contains this AD, the regulatory evaluation, any comments received, and 
other information. The street address for the Docket Office (telephone 
800-647-5527) is Docket Management Facility, U.S. Department of 
Transportation, Docket Operations, M-30, West Building Ground Floor, 
Room W12-140, 1200 New Jersey Avenue SE., Washington, DC 20590.

FOR FURTHER INFORMATION CONTACT: Aziz Ahmed, Aerospace Engineer, 
Airframe and Mechanical Systems Branch, ANE-171, FAA, New York Aircraft 
Certification Office (ACO), 1600 Stewart Avenue, Suite 410, Westbury, 
NY 11590; telephone 516-228-7329; fax 516-794-5531.

SUPPLEMENTARY INFORMATION:

Discussion

    We issued a notice of proposed rulemaking (NPRM) to amend 14 CFR 
part 39 by adding an AD that would apply to certain Bombardier, Inc., 
Model BD-100-1A10 airplanes. The NPRM published in the Federal Register 
on March 23, 2017 (82 FR 14837). The NPRM was prompted by a recent 
design review of the equipment racks which revealed that the left-hand 
side (LHS) and right-hand side (RHS) equipment racks were not designed 
to support the actual weight of all the equipment and the secondary 
direct current power centers under all loading conditions. The NPRM 
proposed to require modifying the equipment racks. We are

[[Page 27407]]

issuing this AD to prevent structural failure of the LHS or RHS 
equipment racks in the event of a high energy emergency landing or 
runway excursion, which could result in blockage of the emergency exit 
for the flightcrew.
    Transport Canada Civil Aviation (TCCA), which is the aviation 
authority for Canada, has issued Canadian Airworthiness Directive CF-
2016-26, dated September 14, 2016 (referred to after this as the 
Mandatory Continuing Airworthiness Information, or ``the MCAI''), to 
correct an unsafe condition for certain Bombardier, Inc., Model BD-100-
1A10 airplanes. The MCAI states:

    During a recent design review, a Bombardier equipment supplier 
discovered that the weight of the Secondary Direct Current (DC) 
Power Center was incorrectly reported to the structural partner(s) 
via their equipment interface drawing. Consequently, the left-hand 
side (LHS) and right-hand side (RHS) equipment racks were not 
designed to support the actual weight of all the equipment and the 
Secondary DC Power Centers under all loading conditions. In the 
event of a high energy emergency landing or runway excursion, the 
structural failure of the LHS or RHS equipment racks may result in 
the blockage of the emergency escape route for the pilot(s) and crew 
if this condition is not corrected.

    Required actions include modifying the equipment racks. You may 
examine the MCAI in the AD docket on the Internet at <a href="http://www.regulations.gov">http://www.regulations.gov</a> by searching for and locating Docket No. FAA-2016-
9387.

Comments

    We gave the public the opportunity to participate in developing 
this AD. We received no comments on the NPRM or on the determination of 
the cost to the public.

Conclusion

    We reviewed the relevant data and determined that air safety and 
the public interest require adopting this AD as proposed, except for 
minor editorial changes. We have determined that these minor changes:
    <bullet> Are consistent with the intent that was proposed in the 
NPRM for correcting the unsafe condition; and
    <bullet> Do not add any additional burden upon the public than was 
already proposed in the NPRM.

Related Service Information Under 1 CFR Part 51

    We reviewed Bombardier Service Bulletin 100-25-39, dated October 
26, 2015; and Bombardier Service Bulletin 350-25-002, dated October 26, 
2015. This service information describes procedures for modifying the 
equipment racks. These documents are distinct since they apply to 
airplanes having different serial numbers. This service information is 
reasonably available because the interested parties have access to it 
through their normal course of business or by the means identified in 
the ADDRESSES section.

Costs of Compliance

    We estimate that this AD affects 161 airplanes of U.S. registry.
    We estimate the following costs to comply with this AD:

                                                 Estimated Costs
----------------------------------------------------------------------------------------------------------------
                                                                         Cost per
            Action                  Labor cost         Parts cost        product        Cost on U.S. operators
----------------------------------------------------------------------------------------------------------------
Modify equipment racks.......  Up to 10 work-hours           $1,755  Up to $2,605...  Up to $419,405.
                                x $85 per hour =
                                $850.
----------------------------------------------------------------------------------------------------------------

    According to the manufacturer, some of the costs of this AD may be 
covered under warranty, thereby reducing the cost impact on affected 
individuals. We do not control warranty coverage for affected 
individuals. As a result, we have included all costs in our cost 
estimate.

Authority for This Rulemaking

    Title 49 of the United States Code specifies the FAA's authority to 
issue rules on aviation safety. Subtitle I, section 106, describes the 
authority of the FAA Administrator. ``Subtitle VII: Aviation 
Programs,'' describes in more detail the scope of the Agency's 
authority.
    We are issuing this rulemaking under the authority described in 
``Subtitle VII, Part A, Subpart III, Section 44701: General 
requirements.'' Under that section, Congress charges the FAA with 
promoting safe flight of civil aircraft in air commerce by prescribing 
regulations for practices, methods, and procedures the Administrator 
finds necessary for safety in air commerce. This regulation is within 
the scope of that authority because it addresses an unsafe condition 
that is likely to exist or develop on products identified in this 
rulemaking action.

Regulatory Findings

    We determined that this AD will not have federalism implications 
under Executive Order 13132. This AD will not have a substantial direct 
effect on the States, on the relationship between the national 
government and the States, or on the distribution of power and 
responsibilities among the various levels of government.
    For the reasons discussed above, I certify that this AD:
    1. Is not a ``significant regulatory action'' under Executive Order 
12866;
    2. Is not a ``significant rule'' under the DOT Regulatory Policies 
and Procedures (44 FR 11034, February 26, 1979);
    3. Will not affect intrastate aviation in Alaska; and
    4. Will not have a significant economic impact, positive or 
negative, on a substantial number of small entities under the criteria 
of the Regulatory Flexibility Act.

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Incorporation by 
reference, Safety.

Adoption of the Amendment

    Accordingly, under the authority delegated to me by the 
Administrator, the FAA amends 14 CFR part 39 as follows:

PART 39--AIRWORTHINESS DIRECTIVES

0
1. The authority citation for part 39 continues to read as follows:

    Authority: 49 U.S.C. 106(g), 40113, 44701.


Sec.  39.13  [Amended]

0
2. The FAA amends Sec.  39.13 by adding the following new airworthiness 
directive (AD):

2017-12-11 Bombardier, Inc.: Amendment 39-18926; Docket No. FAA-
2016-9387; Directorate Identifier 2016-NM-182-AD.

(a) Effective Date

    This AD is effective July 20, 2017.

(b) Affected ADs

    None.

(c) Applicability

    This AD applies to Bombardier, Inc., Model BD-100-1A10 
airplanes, certificated in any category, serial numbers (S/Ns) 20003 
through 20532 inclusive.

[[Page 27408]]

(d) Subject

    Air Transport Association (ATA) of America Code 25, Equipment/
Furnishings.

(e) Reason

    This AD was prompted by a report that the left-hand side (LHS) 
and right-hand side (RHS) equipment racks were not designed to 
support the actual weight of all the equipment and the secondary 
direct current power centers under all loading conditions. We are 
issuing this AD to prevent structural failure of the LHS or RHS 
equipment racks in the event of a high energy emergency landing or 
runway excursion, which could result in blockage of the emergency 
exit for the flightcrew.

(f) Compliance

    Comply with this AD within the compliance times specified, 
unless already done.

(g) Modification of the Equipment Racks

    Within 90 months after the effective date of this AD, do the 
modification required by paragraph (g)(1) or (g)(2) of this AD, as 
applicable.
    (1) For airplanes having S/Ns 20003 through 20500 inclusive: 
Modify the equipment racks having part numbers (P/Ns) K1000070316-
003 (LHS) and K1000070316-004 (RHS), in accordance with the 
Accomplishment Instructions of Bombardier Service Bulletin 100-25-
39, dated October 26, 2015.
    (2) For airplanes having S/Ns 20501 through 20532 inclusive: 
Modify the equipment rack having P/N K1000070316-004 (RHS only), in 
accordance with the Accomplishment Instructions of Bombardier 
Service Bulletin 350-25-002, dated October 26, 2015.

(h) Other FAA AD Provisions

    The following provisions also apply to this AD:
    (1) Alternative Methods of Compliance (AMOCs): The Manager, New 
York Aircraft Certification Office (ACO), ANE-170, FAA, has the 
authority to approve AMOCs for this AD, if requested using the 
procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, 
send your request to your principal inspector or local Flight 
Standards District Office, as appropriate. If sending information 
directly to the New York ACO, send it to ATTN: Program Manager, 
Continuing Operational Safety, FAA, New York ACO, 1600 Stewart 
Avenue, Suite 410, Westbury, NY 11590; telephone 516-228-7300; fax 
516-794-5531. Before using any approved AMOC, notify your 
appropriate principal inspector, or lacking a principal inspector, 
the manager of the local flight standards district office/
certificate holding district office.
    (2) Contacting the Manufacturer: For any requirement in this AD 
to obtain corrective actions from a manufacturer, the action must be 
accomplished using a method approved by the Manager, New York ACO, 
ANE-170, FAA; or Transport Canada Civil Aviation (TCCA); or 
Bombardier, Inc.'s TCCA Design Approval Organization (DAO). If 
approved by the DAO, the approval must include the DAO-authorized 
signature.

(i) Related Information

    (1) Refer to Mandatory Continuing Airworthiness Information 
(MCAI) Canadian Airworthiness Directive CF-2016-26, dated September 
14, 2016, for related information. This MCAI may be found in the AD 
docket on the Internet at <a href="http://www.regulations.gov">http://www.regulations.gov</a> by searching 
for and locating Docket No. FAA-2016-9387.
    (2) For more information about this AD, contact Aziz Ahmed, 
Aerospace Engineer, Airframe and Mechanical Systems Branch, ANE-171, 
FAA, New York Aircraft Certification Office (ACO), 1600 Stewart 
Avenue, Suite 410, Westbury, NY 11590; telephone 516-228-7329; fax 
516-794-5531.

(j) Material Incorporated by Reference

    (1) The Director of the Federal Register approved the 
incorporation by reference (IBR) of the service information listed 
in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
    (2) You must use this service information as applicable to do 
the actions required by this AD, unless this AD specifies otherwise.
    (i) Bombardier Service Bulletin 100-25-39, dated October 26, 
2015.
    (ii) Bombardier Service Bulletin 350-25-002, dated October 26, 
2015.
    (3) For service information identified in this AD, contact 
Bombardier, Inc., 400 C[ocirc]te-Vertu Road West, Dorval, 
Qu[eacute]bec H4S 1Y9, Canada; telephone: 514-855-5000; fax: 514-
855-7401; email: <a href="/cdn-cgi/l/email-protection#413529256f22332b012024332e6f232e2c232033252824336f222e2c"><span class="__cf_email__" data-cfemail="e2968a86cc819088a28387908dcc808d8f808390868b8790cc818d8f">[email&#160;protected]</span></a>; Internet <a href="http://www.bombardier.com">http://www.bombardier.com</a>.
    (4) You may view this service information at the FAA, Transport 
Airplane Directorate, 1601 Lind Avenue SW., Renton, WA. For 
information on the availability of this material at the FAA, call 
425-227-1221.
    (5) You may view this service information that is incorporated 
by reference at the National Archives and Records Administration 
(NARA). For information on the availability of this material at 
NARA, call 202-741-6030, or go to: <a href="http://www.archives.gov/federal-register/cfr/ibr-locations.html">http://www.archives.gov/federal-register/cfr/ibr-locations.html</a>.

    Issued in Renton, Washington, on June 5, 2017.
Michael Kaszycki,
Acting Manager, Transport Airplane Directorate, Aircraft Certification 
Service.
[FR Doc. 2017-12169 Filed 6-14-17; 8:45 am]
 BILLING CODE 4910-13-P