AD 2015-12-04

[Federal Register Volume 80, Number 136 (Thursday, July 16, 2015)]
[Rules and Regulations]
[Pages 42007-42010]
From the Federal Register Online via the Government Publishing Office [<a href="http://www.gpo.gov">www.gpo.gov</a>]
[FR Doc No: 2015-16587]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2006-23706; Directorate Identifier 2006-NE-03-AD; 
Amendment 39-18177; AD 2015-12-04]
RIN 2120-AA64


Airworthiness Directives; Honeywell International Inc. Turboprop 
Engines

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Final rule; correction.

-----------------------------------------------------------------------

SUMMARY: The FAA is correcting an airworthiness directive (AD) that 
published in the Federal Register. That AD applies to all Honeywell 
International Inc. TPE331-1, -2, -2UA, -3U, -3UW, -5, -5A, -5AB, -5B, -
6, -6A, -10, -10AV, -10GP, -10GT, -10P, -10R, -10T, -10U, -10UA, -10UF, 
-10UG, -10UGR, -10UR, -11U, -12JR, -12UA, -12UAR, and -12UHR turboprop 
engines with certain Honeywell part numbers (P/Ns) of Woodward fuel 
control unit (FCU) assemblies, installed. The AD number in the document 
headings is incorrect. Additionally, the Amendment number in the 
regulatory text is incorrect. This document corrects these two errors. 
In all other respects, the original document remains the same.

DATES: This final rule is effective on July 22, 2015. The effective 
date of AD 2015-12-04, Amendment 39-18177 (80 FR 34534, June 17, 2015) 
remains July 22, 2015.

ADDRESSES: You may examine the AD docket on the Internet at <a href="http://www.regulations.gov">http://www.regulations.gov</a>; or in person at the Docket Management Facility 
between 9 a.m. and 5 p.m., Monday through Friday, except Federal 
holidays. The AD docket contains this AD, the regulatory evaluation, 
any comments received, and other information. The address for the 
Docket Office (phone: 800-647-5527) is Document Management Facility, 
U.S. Department of Transportation, Docket Operations, M-30, West 
Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE., 
Washington, DC 20590.

FOR FURTHER INFORMATION CONTACT: Joseph Costa, Aerospace Engineer, Los 
Angeles Aircraft Certification Office, FAA, Transport Airplane 
Directorate, 3960 Paramount Blvd., Lakewood, CA 90712-4137; phone: 562-
627-5246; fax: 562-627-5210; email: <a href="/cdn-cgi/l/email-protection#bed4d1cddbced690ddd1cdcadffed8dfdf90d9d1c8"><span class="__cf_email__" data-cfemail="bed4d1cddbced690ddd1cdcadffed8dfdf90d9d1c8">[email&#160;protected]</span></a>.

SUPPLEMENTARY INFORMATION: AD 2015-12-04, Amendment 39-18177, 80 FR 
34534, June 17, 2015), requires initial and repetitive dimensional 
inspections of the affected fuel control drives and insertion of 
certain airplane operating procedures into the applicable flight 
manuals.
    As published, the AD number in the document headings is incorrect. 
Additionally, the Amendment number in the regulatory text of AD 2015-
12-04 is incorrect.
    No other part of the final rule has been changed.
    The effective date of AD 2015-12-04 remains July 22, 2015.

Correction of Non-Regulatory Text

    In the Federal Register of June 17, 2015, AD 2015-12-04; Amendment 
39-18177 (80 FR 34534) is corrected as follows:
    On page 34534, in the 2nd column, on line 6, change ``2014-12-04'' 
to ``2015-12-04''.

Correction of Regulatory Text


Sec.  39.13  [Corrected]

0
2. The FAA amends Sec.  39.13 by removing airworthiness directive (AD) 
2006-15-08, Amendment 39-14688 (71 FR 41121, July 20, 2006), and adding 
the following new AD:

2015-12-04 Honeywell International Inc.: Amendment 39-18177; Docket 
No. FAA-2006-23706; Directorate Identifier 2006-NE-03-AD.

(a) Effective Date

    This AD is effective August 20, 2015.

(b) Affected ADs

    This AD replaces AD 2006-15-08, Amendment 39-14688 (71 FR 41121, 
July 20, 2006).

(c) Applicability

    This AD applies to all Honeywell International Inc. TPE331-1, -
2, -2UA, -3U, -3UW, -5, -5A, -5AB, -5B, -6, -6A, -10, -10AV, -10GP, 
-10GT, -10P, -10R, -10T, -10U, -10UA, -10UF, -10UG, -10UGR, -10UR, -
11U, -12JR, -12UA, -12UAR, and -12UHR turboprop engines with 
Honeywell part numbers (P/Ns) for Woodward fuel control unit (FCU) 
assemblies listed in Table 1 to paragraph (c) of this AD, installed.

                              Table 1 to Paragraph (c)--Affected FCU Assembly P/Ns
----------------------------------------------------------------------------------------------------------------
         Group No.                        Engine                               FCU Assembly P/Ns
----------------------------------------------------------------------------------------------------------------
1..........................  TPE331-1, -2, and -2UA.........  P/N 869199-13, -20, -21, -22, -23, -24, -25, -26,
                                                               27, -28, -29, -31, -32, -33, -34, and -35.

[[Page 42008]]

 
2 *........................  TPE331-1, -2, and -2UA.........  P/N 869199-9, -10, -11, -12, -14, -16, -17, and -
                                                               18.
3..........................  TPE331-3U, -3UW, -5, -5A, -5AB,  P/N 893561-7, -8, -9, -10, -11, -14, -15, -16, -
                              -5B, -6, -6A, -10AV, -10GP, -    20, -26, -27, and -29; or
                              10GT, -10P, and -10T.           P/N 897770-1, -3, -7, -9, -10, -11, -12, -14, -15,
                                                               -16, -25, -26, and -28.
4 *........................  TPE331-3U, -3UW, -5, -5B, -6, -  P/N 893561-4, -5, -12, and -13 or P/N 897770-5, -
                              6A, and -10T.                    8, and -13.
5..........................  TPE331-10, -10R, -10U, -10UA, -  P/N 897375-2, -3, -4, -5, -8, -9, -10, -11, -12, -
                              10UF, -10UG, -10UGR, -10UR, -    13, -14, -15, -16, -17, -19, -21, -24, -25, -26,
                              11U, -12JR, -12UA, -12UAR, and   and -27; or
                              -12UHR.                         P/N 897780-1, -2, -3, -4, -5, -6, -7, -8, -9, -10,
                                                               -11, -14, -15, -16, -17, -18, -19, -20, -21, -22,
                                                               -23, -24, -25, -26, -27, -30, -32, -34, -36, -37,
                                                               and -38; or
                                                              P/N 893561-17, -18, and -19.
----------------------------------------------------------------------------------------------------------------
* New/added FCU assembly P/Ns

(d) Unsafe Condition

    We are issuing this AD to prevent failure of the fuel control 
drive that could result in damage to the engine and airplane.

(e) Compliance

    Comply with this AD within the compliance times specified, 
unless already done.

(1) Inspection of Engines With FCU Assembly P/Ns in Groups 2 and 4

    For FCU assembly P/Ns in Groups 2 and 4 listed in Table 1 to 
paragraph (c) of this AD:
    (i) At the next scheduled inspection of the fuel control drive, 
or within 500 hours-in-service (HIS) after the effective date of 
this AD, whichever occurs first, inspect the fuel control drive for 
wear.
    (ii) Thereafter, re-inspect the fuel control drive within every 
1,000 HIS since-last-inspection (SLI).

(2) Inspection of Engines With FCU Assembly P/Ns in Groups 1, 3, 
and 5

    For FCU assembly P/Ns in Groups 1, 3, or 5 listed in Table 1 to 
paragraph (c) of this AD:
    (i) If on the effective date of this AD the FCU assembly has 950 
or more HIS SLI, inspect the fuel control drive for wear within 50 
HIS from the effective date of this AD.
    (ii) If on the effective date of this AD the FCU assembly has 
fewer than 950 HIS SLI, inspect the fuel control drive for wear 
before reaching 1,000 HIS.
    (iii) Thereafter, re-inspect the fuel control drive for wear 
within every 1,000 HIS SLI.

(3) Airplane Operating Procedures

    Within 60 days after the effective date of this AD, insert the 
information in Figure 1 to paragraph (e) of this AD, into the 
Emergency Procedures Section of the Airplane Flight Manual (AFM), 
Pilot Operating Handbook (POH), and the Manufacturer's Operating 
Manual (MOM).

[[Page 42009]]

[GRAPHIC] [TIFF OMITTED] TR16JY15.000

(f) Optional Terminating Action

    Replacing the affected FCU assembly with an FAA-approved FCU 
assembly P/N not listed in this AD is terminating action for the 
initial and repetitive inspections required by this AD, and for 
inserting the information in Figure 1 to paragraph (e) of this AD 
into the AFM, POH, and MOM.

(g) Definitions

    For the purposes of this AD:
    (1) The ``fuel control drive'' is a series of mating splines 
located between the fuel pump and fuel control governor.
    (2) The fuel control drive consists of four drive splines: the 
fuel pump internal spline, the fuel control external ``quill shaft'' 
spline, and the stub shaft internal and external splines.

(h) Alternative Methods of Compliance (AMOCs)

    The Manager, Los Angeles Aircraft Certification Office, FAA, may 
approve AMOCs for this AD. Use the procedures found in 14 CFR 39.19 
to make your request.

(i) Related Information

    (1) For more information about this AD, contact Joseph Costa, 
Aerospace Engineer, Los Angeles Aircraft Certification Office, FAA, 
Transport Airplane Directorate, 3960 Paramount Blvd., Lakewood, CA 
90712-4137; phone: 562-627-5246; fax: 562-627-5210; email: 
<a href="/cdn-cgi/l/email-protection#5f35302c3a2f37713c302c2b3e1f393e3e71383029"><span class="__cf_email__" data-cfemail="4b2124382e3b23652824383f2a0b2d2a2a652c243d">[email&#160;protected]</span></a>.
    (2) Information pertaining to operating recommendations for 
affected engines after a fuel control drive failure is contained in 
Honeywell International Inc., Operating Information Letter (OIL) 
OI331-12R6, dated May 26, 2009, for multi-engine airplanes; and in 
OIL OI331-18R4, dated May 26, 2009, for single-engine airplanes. 
Information on fuel control drive inspection can be found in Section 
72-00-00 of the applicable TPE331 maintenance manuals. These 
Honeywell International Inc., OILs and the TPE331 maintenance 
manuals, which are not incorporated by reference in this AD, can be 
obtained from Honeywell International Inc., using the contact 
information in paragraph (i)(3) of this AD.
    (3) For service information identified in this AD, contact 
Honeywell International Inc., 111 S. 34th Street, Phoenix, AZ 85034-
2802; Internet: <a href="https://myaerospace.honeywell.com/wps/portal/!ut">https://myaerospace.honeywell.com/wps/portal/!ut</a>; 
phone: 800-601-3099.
    (4) You may view this service information at the FAA, Engine & 
Propeller Directorate, 12 New England Executive Park, Burlington, 
MA. For information on the availability of this material at the FAA, 
call 781-238-7125.

(j) Material Incorporated by Reference

    None.


[[Page 42010]]


    Issued in Burlington, Massachusetts, on June 26, 2015.
Ann C. Mollica,
Acting Directorate Manager, Engine and Propeller Directorate, Aircraft 
Certification Service.
[FR Doc. 2015-16587 Filed 7-15-15; 8:45 am]
BILLING CODE 4910-13-P