AD 2015-10-07
Applicability
| Type | Manufacturer | Model | Details |
|---|---|---|---|
| engine | Turbomeca | S | Airworthiness Directives; Turbomeca S.A. Turboshaft Engines |
Unsafe Condition
Incorrect bonding of the nozzle on the ejector assembly of certain serial number (S/N) lubricating devices, which could lead to failure of the ejector assembly nozzle.
AI-generated summary from the source AD text. Verify against the official source before acting.
Required Actions
Inspect the ejector assembly nozzle of certain S/N lubricating devices. Remove and replace any ejector assembly nozzle that fails inspection with a part eligible for installation.
AI-generated summary from the source AD text. Verify against the official source before acting.
Compliance Time
Within the compliance times specified in the AD, unless already done.
AI-generated summary from the source AD text. Verify against the official source before acting.
Affected Aircraft
All Turbomeca S.A. Arrius 2F turboshaft engines equipped with a lubricating device having an S/N listed in the referenced figure.
AI-generated summary from the source AD text. Verify against the official source before acting.
Source: Official FAA Source ↗
Retrieved: Apr 6, 2026
Rights: U.S. Government Public Domain
This site is not affiliated with or endorsed by the FAA. Always verify with official sources.