AD 2014-06-03
Applicability
| Type | Manufacturer | Model | Details |
|---|---|---|---|
| aircraft | Aviat | Various | Airworthiness Directives; British Aerospace Regional Aircraft Airplanes |
Unsafe Condition
Stress corrosion cracking of the main landing gear yoke pintle housing.
AI-generated summary from the source AD text. Verify against the official source before acting.
Required Actions
Modify the left hand (LH) and right hand (RH) main landing gear (MLG) installation at the forward spigot following the instructions of British Aerospace Jetstream Series 3100 & 3200 Service Bulletin 32-JM7862, Revision 1, dated May 7, 2013. Do not install any LH or RH MLG unless it is found to be in compliance with the requirements of paragraph (f)(1) of this AD.
AI-generated summary from the source AD text. Verify against the official source before acting.
Compliance Time
At the next scheduled MLG removal after May 2, 2014.
AI-generated summary from the source AD text. Verify against the official source before acting.
Affected Aircraft
British Aerospace Regional Aircraft Jetstream Series 3101 and Jetstream Model 3201 airplanes, all serial numbers, certificated in any category.
AI-generated summary from the source AD text. Verify against the official source before acting.
Source: Official FAA Source ↗
Retrieved: Apr 6, 2026
Rights: U.S. Government Public Domain
This site is not affiliated with or endorsed by the FAA. Always verify with official sources.